[Thu Jun  6 19:27:36 2013] Detection parameters:
  Position = (346.9, 258.1) = 15 1 35.56 -41 53 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 671.9 +/- 39.9
  Background counts = 243.1
  Rate = 0.007 +/- 0.0004

[Thu Jun  6 19:27:51 2013] Off-axis axis estimate = 4.57'
[Thu Jun  6 19:30:38 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:30:38 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Thu Jun  6 19:30:38 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.957
[Thu Jun  6 19:30:38 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 8.72"
[Thu Jun  6 19:30:39 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jun  6 19:30:39 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jun  6 19:30:39 2013] Fit fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src22 appears to have run properly
[Thu Jun  6 19:30:42 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jun  6 19:30:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Jun  6 19:30:42 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jun  6 19:30:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Jun  6 19:30:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:31:44 2013] Source 41 is offset by 2.094653 and 8.892651 pixels which is larger than
2 X fitted extent = 7.824506 x 7.824506, not incorporating fit results
[Thu Jun  6 19:31:44 2013] Spatial fit model total counts = 5717.870000, observed total counts = 5239.000000
[Thu Jun  6 19:31:44 2013] Offset between fit and detection position for source 41 = 1.626697 pixels
[Thu Jun  6 19:31:44 2013] 5756.240000 total counts/ 4496.630000 bgd. counts: snr = 18.784192
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.626697 pixels
  Position = (348.4, 258.6) = 15 1 34.97 -41 53 11.5
  Extent = 17.4" x 17.4", rotation angle = 0
  Source counts = 1259.6 +/- 75.9
  Background counts = 4496.6
  Rate = 0.01 +/- 0.0006
[Thu Jun  6 19:31:44 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:31:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:31:44 2013] Assessing source extent using major
[Thu Jun  6 19:31:44 2013] Source does appear to be extended
[Thu Jun  6 19:31:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:31:44 2013] Source is confused with source 42
[Thu Jun  6 19:33:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:33:19 2013] Initial guess for spatial extent in simple fitting = 17.43"
[Thu Jun  6 19:33:19 2013] source mask rpix=4.0, npix_max = 81, mask sum = 69, frac = 0.849
[Thu Jun  6 19:33:19 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 17.43"
[Thu Jun  6 19:33:20 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src22.ximg exists
[Thu Jun  6 19:33:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src22.csv
[Thu Jun  6 19:33:20 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Jun  6 19:33:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src22.csv
[Thu Jun  6 19:33:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:33:23 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Jun  6 19:33:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Thu Jun  6 19:33:23 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Jun  6 19:33:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Thu Jun  6 19:33:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:34:26 2013] Spatial fit model total counts = 16664.800000, observed total counts = 12708.000000
[Thu Jun  6 19:34:26 2013] Poor agreement between spatial fit and data for source 41
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 19:34:27 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:34:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:34:27 2013] Assessing source extent using major
[Thu Jun  6 19:34:27 2013] Source does appear to be extended
[Thu Jun  6 19:34:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:37:10 2013] Counts = 1259.610000, rescaling region sizes by 2.000000
[Thu Jun  6 19:37:10 2013] XMMSAS src. selection expression = ellipse(30265.914000, 22453.292600, 2091.732060, 2091.732060, 0.000000, X, Y)
[Thu Jun  6 19:37:10 2013] Not overwriting source region fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_src.reg
[Thu Jun  6 19:37:10 2013] Extracting stamp from image fullrun_mos1_xmm0555630501_pi300-10000_cl_sm2.00.img.gz, (228, 138) - (469, 379)
[Thu Jun  6 19:37:10 2013] XMMSAS bgd. selection expression = annulus(30265.914000, 22453.292600, 6972.440201, 13944.880401, X, Y) && !ellipse(26549.364000, 27771.242000, 6603.696190, 6603.696190, 0.000000, X, Y) && !ellipse(20696.426000, 32170.544600, 1548.520045, 1146.496033, 0.000000, X, Y) && !ellipse(26738.178600, 27294.102000, 1648.568047, 1648.568047, 0.000000, X, Y) && !ellipse(19477.430000, 32983.424400, 1633.856047, 1633.856047, 0.000000, X, Y) && !ellipse(18295.826000, 33727.396000, 1712.576049, 1712.576049, 0.000000, X, Y) && !ellipse(21375.619200, 31550.776000, 1342.256039, 1342.256039, 0.000000, X, Y) && !ellipse(18927.466000, 33444.460000, 1693.040049, 1693.040049, 0.000000, X, Y) && !ellipse(22379.476000, 30664.800000, 1303.672038, 1303.672038, 0.000000, X, Y) && !ellipse(22214.636000, 30638.551800, 1445.552042, 1445.552042, 0.000000, X, Y) && !ellipse(24884.730591, 28700.172614, 1079.280748, 407.314636, 167.556815, X, Y) && !ellipse(23197.222000, 30132.542000, 2572.352074, 778.780022, 41.274000, X, Y) && !ellipse(28655.214000, 22889.458000, 1529.224044, 1529.224044, 0.000000, X, Y) && !ellipse(26337.284698, 21881.617188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29287.502000, 22253.620000, 1531.912044, 1531.912044, 0.000000, X, Y) && !ellipse(26833.053009, 21978.106262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18565.694016, 32749.560120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27113.698200, 21518.732800, 652.824019, 652.824019, 0.000000, X, Y) && !ellipse(23100.401480, 24578.825200, 376.908811, 376.908811, 0.000000, X, Y) && !ellipse(24387.722000, 25186.224000, 1196.448034, 1196.448034, 0.000000, X, Y) && !ellipse(23416.058000, 29997.464000, 1402.672040, 1402.672040, 0.000000, X, Y) && !ellipse(23760.352800, 28487.014000, 733.138421, 733.138421, 0.000000, X, Y) && !ellipse(29578.275800, 24462.297000, 739.168821, 739.168821, 0.000000, X, Y) && !ellipse(23153.210000, 20383.372000, 2246.864065, 1300.112037, 154.439000, X, Y) && !ellipse(27176.005798, 28317.299347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21206.805000, 29655.446800, 495.740814, 495.740814, 0.000000, X, Y) && !ellipse(23886.251400, 31476.974200, 464.915213, 464.915213, 0.000000, X, Y) && !ellipse(21349.395325, 21012.363251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30937.289760, 31178.700600, 273.882408, 273.882408, 0.000000, X, Y) && !ellipse(27964.611600, 23701.071200, 744.890421, 744.890421, 0.000000, X, Y) && !ellipse(26107.162600, 24348.044400, 2291.768066, 2291.768066, 0.000000, X, Y) && !ellipse(20041.554000, 19662.748000, 1594.424046, 1594.424046, 0.000000, X, Y) && !ellipse(28349.732000, 24351.314000, 1194.848034, 1194.848034, 0.000000, X, Y) && !ellipse(27892.866364, 27289.821594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18296.816000, 20680.222000, 799.507223, 799.507223, 0.000000, X, Y) && !ellipse(23088.758118, 31198.969910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29624.126000, 24402.038000, 2701.984078, 878.160025, 66.913000, X, Y) && !ellipse(25916.266083, 29021.129028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26862.409800, 26687.008000, 1102.088032, 1102.088032, 0.000000, X, Y) && !ellipse(24508.888153, 20598.685791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27700.734800, 22470.898600, 1283.344037, 691.737620, -0.000000, X, Y) && !ellipse(23961.626708, 23976.622400, 761.499222, 761.499222, 0.000000, X, Y) && !ellipse(21974.841600, 29404.207400, 863.752025, 863.752025, 0.000000, X, Y) && !ellipse(28847.681274, 21891.434158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22327.502000, 32693.620000, 1531.912044, 1531.912044, 0.000000, X, Y) && !ellipse(23878.414000, 27523.484000, 840.992024, 840.992024, 0.000000, X, Y) && !ellipse(19694.830185, 20134.951736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27000.229584, 26138.900909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22490.247000, 27242.252000, 1279.072037, 1279.072037, 0.000000, X, Y) && !ellipse(20833.021332, 33100.626678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24875.136000, 23012.446280, 1057.136030, 1057.136030, 0.000000, X, Y) && !ellipse(24844.676000, 20921.484000, 1395.224040, 1395.224040, 0.000000, X, Y) && !ellipse(28304.074646, 21711.691330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16634.517200, 27887.326000, 978.104028, 721.182421, 31.591070, X, Y) && !ellipse(18408.890060, 21975.197200, 856.448025, 856.448025, 0.000000, X, Y) && !ellipse(28141.337006, 24861.771200, 694.349620, 694.349620, 0.000000, X, Y) && !ellipse(22022.669601, 18214.838531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35752.712800, 25653.321600, 489.119214, 489.119214, 0.000000, X, Y) && !ellipse(15867.261627, 35259.391174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19698.993271, 21605.591049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19254.315689, 25617.224823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19233.607788, 20400.236954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20180.286362, 26181.168976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25068.470093, 29324.612152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.598938, 31778.822998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22794.148102, 31891.595367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18451.651215, 17442.744064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23598.764000, 23950.946000, 2383.928069, 2383.928069, 0.000000, X, Y) && !ellipse(41778.090790, 31093.599762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19720.308020, 21859.745000, 1532.864044, 1532.864044, 0.000000, X, Y) && !ellipse(24089.365400, 22332.903000, 789.171223, 789.171223, 0.000000, X, Y) && !ellipse(14871.128000, 35597.096000, 3875.456112, 3875.456112, 0.000000, X, Y) && !ellipse(17757.217682, 22831.926514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15470.974609, 35361.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23938.372000, 20590.149400, 1395.224040, 1395.224040, 0.000000, X, Y) && !ellipse(17138.073200, 24100.917800, 899.352026, 899.352026, 0.000000, X, Y) && !ellipse(18099.122000, 17869.318000, 1497.008043, 1497.008043, 0.000000, X, Y) && !ellipse(26049.325531, 20939.576950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.539400, 21111.962000, 1329.712038, 621.064018, 90.000000, X, Y) && !ellipse(28471.247000, 29433.980400, 1036.816030, 1036.816030, 0.000000, X, Y) && !ellipse(17852.464203, 22216.551788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16163.908000, 34917.808000, 1937.728056, 1937.728056, 0.000000, X, Y) && !ellipse(18037.846000, 20802.944600, 1817.512052, 1817.512052, 0.000000, X, Y) && !ellipse(18223.192600, 25537.785800, 1548.560045, 1548.560045, 0.000000, X, Y) && !ellipse(27345.928000, 23194.318000, 1196.824034, 1196.824034, 0.000000, X, Y) && !ellipse(17779.573029, 26041.315308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17951.614944, 23803.526520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21863.942000, 29239.538000, 1389.096040, 1389.096040, 0.000000, X, Y) && !ellipse(30392.854640, 28541.477600, 287.481608, 287.481608, 0.000000, X, Y) && !ellipse(24366.363525, 30628.173126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20242.300000, 19374.592000, 1597.416046, 1597.416046, 0.000000, X, Y) && !ellipse(20302.364609, 20747.182907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25891.964000, 22129.924400, 1298.960037, 1298.960037, 0.000000, X, Y) && !ellipse(17141.228000, 26389.748000, 1571.032045, 1571.032045, 0.000000, X, Y) && !ellipse(17117.059586, 13787.513458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33204.618866, 36113.861908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16412.575439, 15450.549469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28581.118988, 28248.650909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18969.971344, 21433.900925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16783.192000, 34193.728000, 1890.472054, 1890.472054, 0.000000, X, Y) && !ellipse(21768.024414, 19788.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24797.776581, 31847.742249, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(20144.240356, 22037.520508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24510.651093, 29788.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37494.487762, 23006.683197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23047.169739, 29095.464539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20422.028107, 34677.167145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40651.322906, 24900.643036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16172.462555, 29003.313782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22180.296036, 18994.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22387.625946, 17614.556320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19206.853058, 25031.297028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27553.527069, 25448.242828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28939.003662, 28641.523560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24019.045868, 13272.996658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16003.102219, 25878.646973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16673.467911, 14654.562393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20597.830872, 21694.202652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20021.466492, 22559.934692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17464.826000, 34188.940000, 10267.032295, 10267.032295, 0.000000, X, Y) && !ellipse(18076.583191, 27169.222198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19913.005890, 23342.385101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18822.853516, 24490.695892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21967.982220, 17736.070000, 1603.512046, 1603.512046, 0.000000, X, Y) && !ellipse(25633.454000, 29714.306000, 1235.616036, 1235.616036, 0.000000, X, Y) && !ellipse(17352.577942, 18310.573578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17459.572000, 26260.202000, 3097.120089, 3097.120089, 0.000000, X, Y) && !ellipse(25150.181274, 22297.877991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17409.657089, 32673.883820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34215.922180, 24702.341553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21522.280212, 18142.734573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31957.989685, 24038.865662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15780.785995, 27967.788635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19404.923553, 24206.960876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26133.378448, 26154.382385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18633.385315, 16683.122925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22596.218323, 17113.030579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23723.687134, 32324.516479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17718.835251, 19980.184769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25356.530151, 30998.576263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17286.828796, 33067.985748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16192.162872, 18744.714676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15584.523575, 32074.925140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15684.039383, 16362.666199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30567.481812, 26872.841278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16025.099136, 15942.231689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15989.999649, 25292.002319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19015.686966, 17985.740036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15687.818817, 27011.141754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15898.512650, 28477.355133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15682.220688, 22314.270142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15710.446304, 18622.676254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22127.056061, 17012.961197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.330078, 13780.072739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16024.476532, 14613.530243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20007.017822, 12282.658783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16036.590103, 15345.285522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16415.769440, 25520.910980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15558.578629, 31547.554016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15764.665985, 33802.993439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16217.949844, 33242.901733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18768.524979, 19452.783112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42905.870239, 29651.212616, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 19:37:10 2013] Writing fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41.gif
[Thu Jun  6 19:37:28 2013] ../../xmm0555630501/products/events/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_src.evt and ../../xmm0555630501/products/events/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_bgd.evt exist, delete to re-create
[Thu Jun  6 19:37:28 2013] Mean detx,y = (-5375.38, 1154.49) 
[Thu Jun  6 19:37:28 2013] ../../xmm0555630501/products/images/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_src.img and ../../xmm0555630501/products/images/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_bgd.img exist, delete to re-create
[Thu Jun  6 19:37:28 2013] ../../xmm0555630501/products/spectra/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_src_b10.pi.gz and ../../xmm0555630501/products/spectra/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_bgd.pi exist, delete to re-create
[Thu Jun  6 19:37:28 2013] Setting source spectrum file to fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Jun  6 19:37:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Jun  6 19:37:28 2013] ../../xmm0555630501/products/lightcurves/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_src.lc and ../../xmm0555630501/products/lightcurves/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41_bgd.lc exist, delete to re-create
[Thu Jun  6 19:38:19 2013] fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41.rmf exists, delete to re-create
[Thu Jun  6 19:38:19 2013] fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src41.arf exists, delete to re-create