[Fri Jun  7 11:58:25 2013] Detection parameters:
  Position = (167.0, 364.0) = 15 2 39.75 -41 42 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2368.6 +/- 69.6
  Background counts = 609.1
  Rate = 0.02 +/- 0.0007

[Fri Jun  7 11:58:43 2013] Off-axis axis estimate = 10.65'
[Fri Jun  7 12:01:33 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:01:33 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Fri Jun  7 12:01:33 2013] source mask rpix=2.7, npix_max = 41, mask sum = 34, frac = 0.829
[Fri Jun  7 12:01:33 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 11.75"
[Fri Jun  7 12:01:35 2013] fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jun  7 12:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_src27.csv
[Fri Jun  7 12:01:35 2013] fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jun  7 12:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_src27.csv
[Fri Jun  7 12:01:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:01:37 2013] fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jun  7 12:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Jun  7 12:01:37 2013] fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jun  7 12:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Jun  7 12:01:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:02:23 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 13.684085 pixels away
[Fri Jun  7 12:02:23 2013] Warning, spatial fit 27 centroid is now closest to src. 27
[Fri Jun  7 12:02:24 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:02:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:02:24 2013] Assessing source extent using major
[Fri Jun  7 12:02:24 2013] Source does appear to be extended
[Fri Jun  7 12:02:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:02:24 2013] Source is confused with source 62
[Fri Jun  7 12:04:17 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:04:17 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Fri Jun  7 12:04:17 2013] source mask rpix=2.7, npix_max = 41, mask sum = 34, frac = 0.829
[Fri Jun  7 12:04:17 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 11.75"
[Fri Jun  7 12:04:19 2013] fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_src28.ximg exists
[Fri Jun  7 12:04:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_src28.csv
[Fri Jun  7 12:04:19 2013] fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Jun  7 12:04:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_src28.csv
[Fri Jun  7 12:04:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:04:21 2013] fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Jun  7 12:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri Jun  7 12:04:21 2013] fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Jun  7 12:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri Jun  7 12:04:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:05:06 2013] Source 36 is offset by -0.756110 and -1.393423 pixels which is larger than
2 X fitted extent = 1.322621 x 1.322621, not incorporating fit results
[Fri Jun  7 12:05:06 2013] Spatial fit model total counts = 15379.400000, observed total counts = 10612.000000
[Fri Jun  7 12:05:06 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 12:05:06 2013] Spatial fit model total counts = 47840.300000, observed total counts = 39790.000000
[Fri Jun  7 12:05:06 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 12:05:06 2013] Source 36 is offset by 1.500361 and 2.515818 pixels which is larger than
2 X fitted extent = 2.308363 x 2.308363, not incorporating fit results
[Fri Jun  7 12:05:06 2013] Source 36 is offset by -2.826167 and 9.351244 pixels which is larger than
2 X fitted extent = 6.187586 x 6.187586, not incorporating fit results
[Fri Jun  7 12:05:07 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:05:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:05:07 2013] Assessing source extent using major
[Fri Jun  7 12:05:07 2013] Source does appear to be extended
[Fri Jun  7 12:05:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:07:10 2013] Counts = 2368.637451, rescaling region sizes by 2.000000
[Fri Jun  7 12:07:10 2013] XMMSAS src. selection expression = ellipse(14479.561447, 31618.998199, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun  7 12:07:10 2013] Not overwriting source region fullrun_pn_xmm0555630401_pi300-10000_pass1_cl_src36_src.reg
[Fri Jun  7 12:07:10 2013] Extracting stamp from image fullrun_pn_xmm0555630401_pi300-10000_cl_sm2.00.img.gz, (92, 289) - (242, 439)
[Fri Jun  7 12:07:10 2013] XMMSAS bgd. selection expression = annulus(14479.561447, 31618.998199, 4350.000000, 8700.000000, X, Y) && !ellipse(25313.587739, 24007.125305, 4380.480126, 2555.186303, 59.864310, X, Y) && !ellipse(20521.096542, 23344.086975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19358.928000, 25457.746000, 1427.544041, 1427.544041, 0.000000, X, Y) && !ellipse(16442.614441, 27025.261200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19866.841568, 28222.838715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13717.966000, 23080.542000, 2425.376070, 2425.376070, 0.000000, X, Y) && !ellipse(19191.868073, 28669.850067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16967.334000, 30010.222000, 9776.160281, 9776.160281, 0.000000, X, Y) && !ellipse(17868.208000, 29484.016400, 1629.360047, 873.528025, 33.548000, X, Y) && !ellipse(18035.912000, 29365.046000, 4888.080141, 4888.080141, 0.000000, X, Y) && !ellipse(16494.654000, 30285.860000, 5041.152145, 5041.152145, 0.000000, X, Y) && !ellipse(16913.696289, 28844.943939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21351.912000, 26959.074000, 1324.096038, 880.432025, 51.137000, X, Y) && !ellipse(22385.396000, 25855.400000, 7121.136205, 7121.136205, 0.000000, X, Y) && !ellipse(20977.427048, 37370.155396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18635.882370, 35034.903137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13082.285904, 31879.199036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12212.130585, 31875.004089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18386.676010, 30776.650330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13308.542000, 31811.551400, 1971.984057, 1971.984057, 0.000000, X, Y) && !ellipse(19070.964676, 31088.674683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13428.707489, 30412.956451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12644.722473, 30584.800568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11956.146000, 30544.330200, 1966.456057, 1866.152054, 33.565000, X, Y) && !ellipse(20497.651306, 29887.393402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19568.464066, 29337.951019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13943.786000, 30027.708000, 1913.376055, 1913.376055, 0.000000, X, Y) && !ellipse(22588.481567, 28570.544006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15308.861176, 29527.387360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14398.664771, 28568.542013, 1301.432037, 1301.432037, 0.000000, X, Y) && !ellipse(21200.653946, 28234.980164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14392.015839, 27826.477356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21785.436096, 27525.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11116.712800, 27571.032000, 2006.240058, 2006.240058, 0.000000, X, Y) && !ellipse(12989.424927, 27797.574707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18337.447800, 26895.460000, 1436.360041, 1436.360041, 0.000000, X, Y) && !ellipse(10431.762192, 27261.935822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22449.696400, 27659.961200, 1286.896037, 1286.896037, 0.000000, X, Y) && !ellipse(23462.756165, 26400.179688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20456.924484, 27003.383759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19932.719482, 26064.655670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18237.267600, 26584.817800, 719.388021, 719.388021, 0.000000, X, Y) && !ellipse(14971.888840, 25781.610962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19308.224731, 26224.499054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10537.681931, 25617.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14902.943200, 25282.464000, 1758.200051, 1758.200051, 0.000000, X, Y) && !ellipse(17304.588000, 25672.608000, 827.080024, 827.080024, 0.000000, X, Y) && !ellipse(10613.193619, 25102.892548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12171.369200, 25236.694000, 1937.392056, 1937.392056, 0.000000, X, Y) && !ellipse(17981.627396, 24965.109802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23213.902000, 25342.720000, 1186.856034, 1186.856034, 0.000000, X, Y) && !ellipse(20745.806274, 25701.774231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11084.699608, 24663.694946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11894.587753, 24404.503021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11688.872101, 24819.858459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12389.041824, 24220.214783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15408.449600, 24164.159000, 622.072018, 622.072018, 0.000000, X, Y) && !ellipse(14825.140200, 24860.568000, 3516.400101, 1322.248038, 283.619000, X, Y) && !ellipse(19343.415817, 24215.980011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22564.907562, 24407.739502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13301.215637, 23600.761932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18123.800232, 23354.133606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11958.385452, 23271.092255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13828.002655, 23528.454865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21284.368347, 23698.830750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23234.697113, 23266.565430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19890.158035, 22731.590302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22985.947418, 22773.274261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12460.420959, 22669.459961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18998.990814, 22489.018860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17054.631882, 22564.955353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19540.312790, 22318.074799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11774.657425, 22748.255920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12480.508911, 22056.180054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14797.944595, 22226.245300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18368.763855, 22066.290405, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 12:07:10 2013] Writing fullrun_pn_xmm0555630401_pi300-10000_pass1_cl_src36.gif