[Fri Jun  7 11:59:11 2013] Detection parameters:
  Position = (282.4, 155.0) = 15 1 54.95 -41 57 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223.2 +/- 30.8
  Background counts = 274.4
  Rate = 0.004 +/- 0.0006

[Fri Jun  7 11:59:19 2013] Off-axis axis estimate = 10.46'
[Fri Jun  7 12:01:46 2013] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:01:46 2013] Initial guess for spatial extent in simple fitting = 11.66"
[Fri Jun  7 12:01:46 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.038
[Fri Jun  7 12:01:46 2013] Giving source the simple spatial ID 90 for pass 0, mean size = 11.66"
[Fri Jun  7 12:01:49 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_src90.ximg exists
[Fri Jun  7 12:01:49 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_src90_1.ximg exists
[Fri Jun  7 12:01:49 2013] Fit fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_src90 appears to have run properly
[Fri Jun  7 12:01:51 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Fri Jun  7 12:01:51 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Fri Jun  7 12:01:51 2013] Fit fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Fri Jun  7 12:03:08 2013] Spatial fit model total counts = 4456.520000, observed total counts = 4455.000000
[Fri Jun  7 12:03:08 2013] Offset between fit and detection position for source 180 = 7.033948 pixels
[Fri Jun  7 12:03:08 2013] 4428.699000 total counts/ 3561.860000 bgd. counts: snr = 14.524461
Spatial fit parameters:
  Offset between fit and detection position for source 180 = 7.033948 pixels
  Position = (276.6, 151.1) = 15 1 57.22 -41 57 54.8
  Extent = 23.3 (23.3-46.6)", rotation angle = 0
  Source counts = 866.8 +/- 66.5
  Background counts = 3561.9
  Rate = 0.008 +/- 0.0006
[Fri Jun  7 12:03:09 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:03:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:03:09 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 12:03:09 2013] Source does appear to be extended
[Fri Jun  7 12:03:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:03:09 2013] Source is confused with source 179
[Fri Jun  7 12:04:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:04:29 2013] Initial guess for spatial extent in simple fitting = 23.32"
[Fri Jun  7 12:04:29 2013] source mask rpix=5.4, npix_max = 137, mask sum = 132, frac = 0.961
[Fri Jun  7 12:04:29 2013] Giving source the simple spatial ID 85 for pass 1, mean size = 23.32"
[Fri Jun  7 12:04:32 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src85.ximg exists
[Fri Jun  7 12:04:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src85.csv
[Fri Jun  7 12:04:32 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src85_1.ximg exists
[Fri Jun  7 12:04:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src85.csv
[Fri Jun  7 12:04:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:04:34 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Fri Jun  7 12:04:34 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Fri Jun  7 12:04:34 2013] Fit fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly
[Fri Jun  7 12:05:52 2013] Warning: source 84 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 180 at 18.798875 pixels away
[Fri Jun  7 12:05:52 2013] Warning, spatial fit 85 centroid is now closest to src. 179
[Fri Jun  7 12:05:52 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:05:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:05:52 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 12:05:52 2013] Source does appear to be extended
[Fri Jun  7 12:05:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:08:52 2013] XMMSAS src. selection expression = ellipse(24011.670000, 13094.910000, 1399.278040, 1399.278040, 0.000000, X, Y)
[Fri Jun  7 12:08:52 2013] Not overwriting source region fullrun_mos2_xmm0555630401_pi300-10000_pass1_cl_src180_src.reg
[Fri Jun  7 12:08:52 2013] Extracting stamp from image fullrun_mos2_xmm0555630401_pi300-10000_cl_sm2.00.img.gz, (196, 71) - (357, 231)
[Fri Jun  7 12:08:52 2013] XMMSAS bgd. selection expression = annulus(24011.670000, 13094.910000, 2332.130067, 4664.260134, X, Y) && !ellipse(29650.164000, 14863.266000, 1028.240030, 1028.240030, 0.000000, X, Y) && !ellipse(18836.792419, 18515.278992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29388.102000, 10649.002400, 2076.360060, 2076.360060, 0.000000, X, Y) && !ellipse(25476.132200, 13882.697200, 2303.016066, 1579.360045, 62.659000, X, Y) && !ellipse(29836.511800, 13112.566000, 1793.808052, 1793.808052, 0.000000, X, Y) && !ellipse(28979.696000, 9891.274000, 1245.824036, 1245.824036, 0.000000, X, Y) && !ellipse(29883.644000, 14116.422000, 1811.608052, 1811.608052, 0.000000, X, Y) && !ellipse(29435.964081, 17347.506836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29936.835400, 13411.588000, 10863.744313, 10863.744313, 0.000000, X, Y) && !ellipse(28237.618200, 18746.491720, 1449.640042, 1449.640042, 0.000000, X, Y) && !ellipse(27725.387115, 8128.834251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.058200, 16545.877200, 628.442418, 628.442418, 0.000000, X, Y) && !ellipse(27549.005554, 18462.390808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.853800, 16836.743400, 1648.624047, 380.612811, 335.125700, X, Y) && !ellipse(25231.410000, 13882.810000, 2378.056068, 2378.056068, 0.000000, X, Y) && !ellipse(25725.029000, 12906.492420, 1368.816039, 1368.816039, 0.000000, X, Y) && !ellipse(26744.200000, 14468.598000, 1819.920052, 1819.920052, 0.000000, X, Y) && !ellipse(22103.882000, 16796.368000, 1693.904049, 1693.904049, 0.000000, X, Y) && !ellipse(25764.504608, 17877.548920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28317.725640, 15796.726200, 844.824024, 641.676018, 329.893700, X, Y) && !ellipse(30364.779000, 9851.399200, 2147.200062, 913.336026, 106.447600, X, Y) && !ellipse(28831.891815, 17961.331024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28181.998000, 11931.474000, 1957.848056, 1957.848056, 0.000000, X, Y) && !ellipse(27869.516000, 12091.494000, 2014.984058, 2014.984058, 0.000000, X, Y) && !ellipse(28906.652130, 11363.763763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19178.130951, 15862.234329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20737.978000, 14143.179200, 1888.184054, 1888.184054, 0.000000, X, Y) && !ellipse(25434.591720, 15202.176200, 1216.376035, 1216.376035, 0.000000, X, Y) && !ellipse(26245.798000, 7332.532000, 1941.824056, 1941.824056, 0.000000, X, Y) && !ellipse(27193.151978, 18493.266144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28784.928000, 15818.392000, 1672.456048, 1672.456048, 0.000000, X, Y) && !ellipse(29480.494232, 9355.008423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27369.623400, 16312.410400, 1490.352043, 396.648011, 72.538900, X, Y) && !ellipse(29291.647308, 18045.990616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25247.788116, 8124.904808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28613.210327, 12554.544403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28579.666687, 17083.072556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23540.423737, 14611.327896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27990.438690, 10054.608643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19702.602783, 17518.928802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28815.364258, 7796.891205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24243.433014, 14654.634079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24558.473480, 7713.205345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20084.846024, 17331.362930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22590.841888, 7775.367546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25831.400726, 9429.140160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21002.710892, 15374.354111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24999.479156, 17965.625534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.731934, 14822.117310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27104.938000, 15375.522000, 1689.952049, 1689.952049, 0.000000, X, Y) && !ellipse(28309.687378, 7635.095047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26754.071198, 10684.817017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.307159, 8655.918633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28029.847290, 11107.678223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24983.248962, 8627.788597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26657.802490, 8473.304390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26149.823700, 8155.908249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27593.639252, 11703.059250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.690796, 13171.074066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27656.831604, 10936.590126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18531.400000, 18857.604000, 1303.240038, 1303.240038, 0.000000, X, Y) && !ellipse(23627.044067, 17285.072495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21025.682205, 14721.362930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.038177, 14546.274368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18014.350000, 17862.580000, 1388.984040, 1388.984040, 0.000000, X, Y) && !ellipse(25135.172394, 10376.357704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26043.906616, 10564.995544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18534.527954, 17992.848877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26681.429596, 15087.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21632.826340, 15558.206924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27257.048000, 12380.358000, 1957.848056, 1957.848056, 0.000000, X, Y) && !ellipse(26748.790344, 13165.213089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28947.483826, 8408.865501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.196228, 18062.482330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25221.983887, 8983.940865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27552.361511, 10469.346123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19950.492249, 17920.069214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26529.875214, 10135.568451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.874115, 18546.646835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27030.826141, 8559.236404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.472198, 11887.217392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19251.582336, 15038.037567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.123322, 13096.808914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.803375, 11331.925980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27912.617126, 14898.132126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18716.712082, 14210.366699, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 12:08:52 2013] Writing fullrun_mos2_xmm0555630401_pi300-10000_pass1_cl_src180.gif