[Fri Jun  7 11:59:00 2013] Detection parameters:
  Position = (341.4, 100.9) = 15 1 31.91 -42 1 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 557.3 +/- 36.7
  Background counts = 170.2
  Rate = 0.005 +/- 0.0004

[Fri Jun  7 11:59:19 2013] Off-axis axis estimate = 14.66'
[Fri Jun  7 12:01:46 2013] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:01:46 2013] Initial guess for spatial extent in simple fitting = 13.76"
[Fri Jun  7 12:01:46 2013] source mask rpix=3.2, npix_max = 53, mask sum = 50, frac = 0.932
[Fri Jun  7 12:01:46 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 13.76"
[Fri Jun  7 12:01:48 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_src67.ximg exists
[Fri Jun  7 12:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_src67.csv
[Fri Jun  7 12:01:48 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_src67_1.ximg exists
[Fri Jun  7 12:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_src67.csv
[Fri Jun  7 12:01:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:01:51 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Fri Jun  7 12:01:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src67.csv
[Fri Jun  7 12:01:51 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Fri Jun  7 12:01:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src67.csv
[Fri Jun  7 12:01:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:03:08 2013] Warning, spatial fit 67 centroid is now closest to src. 3
[Fri Jun  7 12:03:09 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:03:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:03:09 2013] Assessing source extent using major
[Fri Jun  7 12:03:09 2013] Source does appear to be extended
[Fri Jun  7 12:03:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:03:09 2013] Source is confused with source 3
[Fri Jun  7 12:04:29 2013] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:04:29 2013] Initial guess for spatial extent in simple fitting = 13.76"
[Fri Jun  7 12:04:29 2013] source mask rpix=3.2, npix_max = 53, mask sum = 50, frac = 0.932
[Fri Jun  7 12:04:29 2013] Giving source the simple spatial ID 64 for pass 1, mean size = 13.76"
[Fri Jun  7 12:04:31 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src64.ximg exists
[Fri Jun  7 12:04:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src64.csv
[Fri Jun  7 12:04:31 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src64_1.ximg exists
[Fri Jun  7 12:04:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src64.csv
[Fri Jun  7 12:04:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:04:34 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Fri Jun  7 12:04:34 2013] fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Fri Jun  7 12:04:34 2013] Fit fullrun_mos2_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Fri Jun  7 12:05:51 2013] Warning, spatial fit 64 centroid is now closest to src. 209
[Fri Jun  7 12:05:52 2013] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 23.344980 pixels away
[Fri Jun  7 12:05:52 2013] Spatial fit model total counts = 4642.370000, observed total counts = 3342.000000
[Fri Jun  7 12:05:52 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 12:05:52 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:05:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:05:52 2013] Assessing source extent using major
[Fri Jun  7 12:05:52 2013] Source does appear to be extended
[Fri Jun  7 12:05:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:08:48 2013] XMMSAS src. selection expression = ellipse(29655.080994, 8727.416580, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 12:08:48 2013] Not overwriting source region fullrun_mos2_xmm0555630401_pi300-10000_pass1_cl_src18_src.reg
[Fri Jun  7 12:08:48 2013] Extracting stamp from image fullrun_mos2_xmm0555630401_pi300-10000_cl_sm2.00.img.gz, (304, 63) - (379, 138)
[Fri Jun  7 12:08:48 2013] XMMSAS bgd. selection expression = annulus(29655.080994, 8727.416580, 1087.500000, 2175.000000, X, Y) && !ellipse(30331.560000, 11521.904000, 1499.296043, 1499.296043, 0.000000, X, Y) && !ellipse(29388.102000, 10649.002400, 2076.360060, 2076.360060, 0.000000, X, Y) && !ellipse(28979.696000, 9891.274000, 1245.824036, 1245.824036, 0.000000, X, Y) && !ellipse(29936.835400, 13411.588000, 10863.744313, 10863.744313, 0.000000, X, Y) && !ellipse(27725.387115, 8128.834251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27586.929993, 7554.907852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30364.779000, 9851.399200, 2147.200062, 913.336026, 106.447600, X, Y) && !ellipse(28181.998000, 11931.474000, 1957.848056, 1957.848056, 0.000000, X, Y) && !ellipse(27869.516000, 12091.494000, 2014.984058, 2014.984058, 0.000000, X, Y) && !ellipse(28906.652130, 11363.763763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.798000, 7332.532000, 1941.824056, 1941.824056, 0.000000, X, Y) && !ellipse(29480.494232, 9355.008423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26842.345612, 7526.580681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29735.881500, 8130.296509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27990.438690, 10054.608643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28815.364258, 7796.891205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.687378, 7635.095047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26754.071198, 10684.817017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28029.847290, 11107.678223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26657.802490, 8473.304390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27593.639252, 11703.059250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27656.831604, 10936.590126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27257.048000, 12380.358000, 1957.848056, 1957.848056, 0.000000, X, Y) && !ellipse(28947.483826, 8408.865501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27552.361511, 10469.346123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27030.826141, 8559.236404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.803375, 11331.925980, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 12:08:48 2013] Writing fullrun_mos2_xmm0555630401_pi300-10000_pass1_cl_src18.gif