[Fri Jun  7 11:58:55 2013] Detection parameters:
  Position = (194.9, 195.1) = 15 2 29.03 -41 54 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 531.0 +/- 39.1
  Background counts = 272.1
  Rate = 0.008 +/- 0.0006

[Fri Jun  7 11:58:59 2013] Off-axis axis estimate = 10.61'
[Fri Jun  7 12:01:39 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:01:39 2013] Initial guess for spatial extent in simple fitting = 11.73"
[Fri Jun  7 12:01:39 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Fri Jun  7 12:01:39 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 11.73"
[Fri Jun  7 12:01:41 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src33.ximg exists
[Fri Jun  7 12:01:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src33.csv
[Fri Jun  7 12:01:41 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Jun  7 12:01:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src33.csv
[Fri Jun  7 12:01:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:01:44 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Jun  7 12:01:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Jun  7 12:01:44 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Jun  7 12:01:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Jun  7 12:01:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:02:45 2013] Warning, spatial fit 33 centroid is now closest to src. 215
[Fri Jun  7 12:02:46 2013] Spatial fit model total counts = 4597.680000, observed total counts = 4597.000000
[Fri Jun  7 12:02:46 2013] Offset between fit and detection position for source 201 = 2.945313 pixels
[Fri Jun  7 12:02:46 2013] Warning, changing simple spatial fit ID from 33 to 94
[Fri Jun  7 12:02:46 2013] 4642.133000 total counts/ 4392.290000 bgd. counts: snr = 3.769829
Spatial fit parameters:
  Offset between fit and detection position for source 201 = 2.945313 pixels
  Position = (196.6, 192.6) = 15 2 28.39 -41 54 53.6
  Extent = 12.3 (9.3-15.4)", rotation angle = 0
  Source counts = 249.8 +/- 68.1
  Background counts = 4392.3
  Rate = 0.002 +/- 0.0007
[Fri Jun  7 12:02:46 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:02:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:02:46 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 12:02:46 2013] Source does appear to be extended
[Fri Jun  7 12:02:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:02:46 2013] Source is confused with source 211
[Fri Jun  7 12:04:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:04:23 2013] Initial guess for spatial extent in simple fitting = 12.33"
[Fri Jun  7 12:04:23 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.102
[Fri Jun  7 12:04:23 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 12.33"
[Fri Jun  7 12:04:24 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src32.ximg exists
[Fri Jun  7 12:04:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src32.csv
[Fri Jun  7 12:04:24 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri Jun  7 12:04:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src32.csv
[Fri Jun  7 12:04:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:04:27 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri Jun  7 12:04:27 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri Jun  7 12:04:27 2013] Fit fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Fri Jun  7 12:05:29 2013] Warning, spatial fit 32 centroid is now closest to src. 188
[Fri Jun  7 12:05:30 2013] Spatial fit model total counts = 4604.250000, observed total counts = 4597.000000
[Fri Jun  7 12:05:30 2013] Offset between fit and detection position for source 201 = 0.080412 pixels
[Fri Jun  7 12:05:30 2013] Warning, changing simple spatial fit ID from 32 to 88
[Fri Jun  7 12:05:30 2013] 4647.933000 total counts/ 4391.790000 bgd. counts: snr = 3.865109
Spatial fit parameters:
  Offset between fit and detection position for source 201 = 0.080412 pixels
  Position = (196.6, 192.7) = 15 2 28.37 -41 54 53.4
  Extent = 12.8 (8.9-21.7)", rotation angle = 0
  Source counts = 256.1 +/- 68.2
  Background counts = 4391.8
  Rate = 0.002 +/- 0.0007
[Fri Jun  7 12:05:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:05:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:05:30 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 12:05:30 2013] Source does appear to be extended
[Fri Jun  7 12:05:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:08:04 2013] XMMSAS src. selection expression = ellipse(17057.313420, 16714.868000, 769.194022, 769.194022, 0.000000, X, Y)
[Fri Jun  7 12:08:04 2013] Not overwriting source region fullrun_mos1_xmm0555630401_pi300-10000_pass1_cl_src201_src.reg
[Fri Jun  7 12:08:04 2013] Extracting stamp from image fullrun_mos1_xmm0555630401_pi300-10000_cl_sm2.00.img.gz, (152, 148) - (241, 237)
[Fri Jun  7 12:08:04 2013] XMMSAS bgd. selection expression = annulus(17057.313420, 16714.868000, 1281.990037, 2563.980074, X, Y) && !ellipse(16804.338000, 14333.442000, 2020.960058, 2020.960058, 0.000000, X, Y) && !ellipse(17291.252075, 13782.507401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14229.063416, 19196.777222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20043.306763, 17418.280624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18234.829800, 16741.457200, 2348.304068, 947.072027, 45.884300, X, Y) && !ellipse(18541.474838, 15626.994751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17106.050507, 16052.564087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17305.352000, 19166.996800, 1133.304033, 1133.304033, 0.000000, X, Y) && !ellipse(26825.714000, 7620.258000, 12942.000372, 12942.000372, 0.000000, X, Y) && !ellipse(19073.166000, 15531.021000, 1872.448054, 1872.448054, 0.000000, X, Y) && !ellipse(17638.715759, 17348.794525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15319.243668, 17716.847961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17690.147659, 16321.117645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17858.502000, 15631.136400, 1872.448054, 1872.448054, 0.000000, X, Y) && !ellipse(18591.226105, 17788.077087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18513.395248, 18845.361526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17687.251022, 14389.943588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15764.561111, 17877.094910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16470.834747, 19519.286285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17033.361115, 19349.450699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17494.450760, 15706.564651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15544.029068, 18652.611710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14511.967407, 14926.466599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16850.126923, 18857.216232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16602.627747, 20042.319092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13904.727692, 18788.529297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15004.463394, 15073.884445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16016.366745, 18387.783157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16509.022000, 14665.260000, 2007.728058, 2007.728058, 0.000000, X, Y) && !ellipse(15893.209229, 19918.850937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14950.522491, 18542.167801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15927.167053, 15733.339294, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 12:08:04 2013] Writing fullrun_mos1_xmm0555630401_pi300-10000_pass1_cl_src201.gif