[Fri Jun  7 11:58:44 2013] Detection parameters:
  Position = (340.9, 163.0) = 15 1 32.13 -41 57 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1373.1 +/- 51.9
  Background counts = 183.9
  Rate = 0.01 +/- 0.0005

[Fri Jun  7 11:58:59 2013] Off-axis axis estimate = 10.29'
[Fri Jun  7 12:01:39 2013] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:01:39 2013] Initial guess for spatial extent in simple fitting = 11.57"
[Fri Jun  7 12:01:39 2013] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.901
[Fri Jun  7 12:01:39 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 11.57"
[Fri Jun  7 12:01:40 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun  7 12:01:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src13.csv
[Fri Jun  7 12:01:40 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun  7 12:01:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src13.csv
[Fri Jun  7 12:01:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:01:43 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun  7 12:01:43 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun  7 12:01:43 2013] Fit fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun  7 12:02:45 2013] Warning, spatial fit 13 centroid is now closest to src. 1
[Fri Jun  7 12:02:45 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.156989 pixels away
[Fri Jun  7 12:02:46 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:02:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:02:46 2013] Assessing source extent using major
[Fri Jun  7 12:02:46 2013] Source does appear to be extended
[Fri Jun  7 12:02:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:02:46 2013] Source is confused with source 1
[Fri Jun  7 12:04:23 2013] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:04:23 2013] Initial guess for spatial extent in simple fitting = 11.57"
[Fri Jun  7 12:04:23 2013] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.901
[Fri Jun  7 12:04:23 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 11.57"
[Fri Jun  7 12:04:24 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun  7 12:04:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src12.csv
[Fri Jun  7 12:04:24 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun  7 12:04:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src12.csv
[Fri Jun  7 12:04:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:04:26 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun  7 12:04:26 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun  7 12:04:26 2013] Fit fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Jun  7 12:05:29 2013] Warning, spatial fit 12 centroid is now closest to src. 17
[Fri Jun  7 12:05:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:05:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:05:30 2013] Assessing source extent using major
[Fri Jun  7 12:05:30 2013] Source does appear to be extended
[Fri Jun  7 12:05:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:07:57 2013] Counts = 1373.078003, rescaling region sizes by 2.000000
[Fri Jun  7 12:07:57 2013] XMMSAS src. selection expression = ellipse(29609.337494, 14133.603165, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun  7 12:07:57 2013] Not overwriting source region fullrun_mos1_xmm0555630401_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  7 12:07:57 2013] Extracting stamp from image fullrun_mos1_xmm0555630401_pi300-10000_cl_sm2.00.img.gz, (266, 88) - (416, 238)
[Fri Jun  7 12:07:57 2013] XMMSAS bgd. selection expression = annulus(29609.337494, 14133.603165, 4350.000000, 8700.000000, X, Y) && !ellipse(29786.011600, 15441.668000, 1760.272051, 882.328025, 90.000000, X, Y) && !ellipse(29617.386000, 16259.250000, 1177.168034, 1177.168034, 0.000000, X, Y) && !ellipse(29723.458618, 11611.803238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29865.788000, 15802.846000, 959.680028, 959.680028, 0.000000, X, Y) && !ellipse(29615.785000, 16822.898000, 1659.888048, 1659.888048, 0.000000, X, Y) && !ellipse(29613.802800, 11272.334000, 1298.808037, 1298.808037, 0.000000, X, Y) && !ellipse(25451.974000, 19843.274800, 1446.800042, 1446.800042, 0.000000, X, Y) && !ellipse(25783.249800, 12697.214000, 1878.224054, 1878.224054, 0.000000, X, Y) && !ellipse(24882.493256, 18961.461975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29854.033600, 12968.917600, 1987.280057, 1987.280057, 0.000000, X, Y) && !ellipse(25206.130000, 14222.464000, 1674.768048, 1674.768048, 0.000000, X, Y) && !ellipse(28821.256000, 9622.314000, 676.993619, 676.993619, 0.000000, X, Y) && !ellipse(27360.820880, 19245.826200, 1094.808032, 1094.808032, 0.000000, X, Y) && !ellipse(29681.633942, 13521.467575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26787.073212, 19903.535400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23292.982800, 21354.016200, 1392.512040, 1392.512040, 0.000000, X, Y) && !ellipse(30092.887360, 14222.156357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27489.533000, 20232.226280, 465.668013, 465.668013, 0.000000, X, Y) && !ellipse(29016.906200, 19210.624000, 1500.312043, 1500.312043, 0.000000, X, Y) && !ellipse(30161.049927, 13698.385452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28133.459808, 18744.560684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21862.227400, 20839.078000, 517.998415, 517.998415, 0.000000, X, Y) && !ellipse(28438.934204, 9178.167542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.845400, 19655.418000, 1481.232043, 335.112010, 341.295300, X, Y) && !ellipse(27579.044000, 16232.510000, 788.410423, 788.410423, 0.000000, X, Y) && !ellipse(24695.719910, 21361.928391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.782000, 16717.238000, 1616.528047, 1616.528047, 0.000000, X, Y) && !ellipse(22804.343414, 20149.219864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.748176, 20414.634200, 1405.024040, 1405.024040, 0.000000, X, Y) && !ellipse(25560.837000, 23374.904000, 1233.472035, 1233.472035, 0.000000, X, Y) && !ellipse(27376.832302, 7611.657907, 678.116820, 678.116820, 0.000000, X, Y) && !ellipse(22367.454000, 22175.618000, 1369.112039, 1369.112039, 0.000000, X, Y) && !ellipse(22435.172000, 19710.107400, 1497.016043, 1497.016043, 0.000000, X, Y) && !ellipse(28491.907349, 16826.898071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28940.294006, 19518.430038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28282.876892, 15966.701767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27845.524000, 8587.030000, 2155.648062, 2155.648062, 0.000000, X, Y) && !ellipse(28361.329200, 20715.521200, 842.976024, 842.976024, 0.000000, X, Y) && !ellipse(22136.574000, 20873.386000, 945.904027, 945.904027, 0.000000, X, Y) && !ellipse(25788.883087, 17892.309555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26094.859283, 7370.287735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25629.424683, 14912.734787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25673.973419, 22064.824829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20043.306763, 17418.280624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29437.980000, 10786.314000, 667.609619, 667.609619, 0.000000, X, Y) && !ellipse(29817.240664, 8466.926824, 1824.632053, 1064.487250, 111.213650, X, Y) && !ellipse(28486.632000, 20321.258000, 910.920026, 910.920026, 0.000000, X, Y) && !ellipse(24420.794281, 15417.855438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26813.363400, 21235.575600, 1031.336030, 1031.336030, 0.000000, X, Y) && !ellipse(28573.315857, 17506.225815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25370.012000, 7647.824000, 2264.976065, 2264.976065, 0.000000, X, Y) && !ellipse(25498.818481, 17020.976730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26287.336000, 18836.946000, 2893.600083, 2893.600083, 0.000000, X, Y) && !ellipse(24321.915680, 7457.378006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23888.994000, 13170.718000, 1849.712053, 1849.712053, 0.000000, X, Y) && !ellipse(21082.788000, 23733.266000, 1367.304039, 1367.304039, 0.000000, X, Y) && !ellipse(24366.299805, 14610.831406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26825.714000, 7620.258000, 12942.000372, 12942.000372, 0.000000, X, Y) && !ellipse(26701.812256, 13711.008789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28121.971497, 12045.425278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29965.222931, 8999.154846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.173004, 21903.152130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28132.158844, 7621.075165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19073.166000, 15531.021000, 1872.448054, 1872.448054, 0.000000, X, Y) && !ellipse(26593.609192, 15170.765137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30382.391754, 9701.687546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25726.787262, 8215.172485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27529.730042, 15622.981674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26326.510590, 15978.324158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21977.114609, 16750.830154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.879211, 9954.066666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20651.117310, 13975.376694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30403.018677, 10213.077385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25002.861664, 18138.442719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28312.424713, 21336.142746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26174.597778, 10387.804863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30108.921082, 15845.620483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25529.399109, 20818.710724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25602.343384, 8819.909172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34453.459686, 21935.872711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27845.827209, 13690.230530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25052.704529, 8566.278870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26853.913574, 13358.087692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.959839, 16586.603317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26356.005310, 16759.382004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29253.786591, 7931.417557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27366.087311, 12385.190704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23539.400000, 14920.438000, 1019.416029, 1019.416029, 0.000000, X, Y) && !ellipse(26815.994446, 10652.833870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31191.748230, 13339.680374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20591.922104, 14556.595795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.897614, 13775.186157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26431.084229, 16352.174850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20945.108000, 23292.576000, 2056.504059, 2056.504059, 0.000000, X, Y) && !ellipse(25033.054657, 16913.126785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29300.881500, 23190.533356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31382.281097, 22714.125519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28250.631561, 10910.835678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28854.223267, 7955.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27794.683380, 21294.626053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.537872, 9412.048409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27833.149445, 11530.081436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25113.759583, 10283.677269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20761.003662, 22174.928894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27858.281952, 12475.192215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36256.192719, 19267.557648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23749.985199, 17539.130920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23504.841034, 17977.423157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23247.595245, 23453.580383, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 12:07:57 2013] Writing fullrun_mos1_xmm0555630401_pi300-10000_pass1_cl_src2.gif