[Fri Jun  7 11:58:52 2013] Detection parameters:
  Position = (316.3, 232.7) = 15 1 41.74 -41 51 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 735.7 +/- 35.9
  Background counts = 202.6
  Rate = 0.009 +/- 0.0004

[Fri Jun  7 11:58:59 2013] Off-axis axis estimate = 4.94'
[Fri Jun  7 12:01:39 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:01:39 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Fri Jun  7 12:01:39 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.695
[Fri Jun  7 12:01:39 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.90"
[Fri Jun  7 12:01:41 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src31.ximg exists
[Fri Jun  7 12:01:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src31.csv
[Fri Jun  7 12:01:41 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri Jun  7 12:01:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src31.csv
[Fri Jun  7 12:01:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:01:44 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri Jun  7 12:01:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Fri Jun  7 12:01:44 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Jun  7 12:01:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Fri Jun  7 12:01:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630401_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:02:45 2013] Spatial fit model total counts = 4870.340000, observed total counts = 4391.000000
[Fri Jun  7 12:02:45 2013] Poor agreement between spatial fit and data for source 150
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 12:02:46 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:02:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:02:46 2013] Assessing source extent using major
[Fri Jun  7 12:02:46 2013] Source does appear to be extended
[Fri Jun  7 12:02:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:02:46 2013] Source is confused with source 147
[Fri Jun  7 12:04:23 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 12:04:23 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Fri Jun  7 12:04:23 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.695
[Fri Jun  7 12:04:23 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 8.90"
[Fri Jun  7 12:04:24 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src30.ximg exists
[Fri Jun  7 12:04:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src30.csv
[Fri Jun  7 12:04:24 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Jun  7 12:04:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src30.csv
[Fri Jun  7 12:04:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 12:04:27 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Jun  7 12:04:27 2013] fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Jun  7 12:04:27 2013] Fit fullrun_mos1_xmm0555630401_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Jun  7 12:05:29 2013] Spatial fit model total counts = 4735.740000, observed total counts = 4391.000000
[Fri Jun  7 12:05:29 2013] Offset between fit and detection position for source 150 = 0.471238 pixels
[Fri Jun  7 12:05:29 2013] 3919.209000 total counts/ 3683.320000 bgd. counts: snr = 3.886762
Spatial fit parameters:
  Offset between fit and detection position for source 150 = 0.471238 pixels
  Position = (316.5, 233.1) = 15 1 41.64 -41 51 57.9
  Extent = 5.8 (4.1-7.3)", rotation angle = 0
  Source counts = 235.9 +/- 62.6
  Background counts = 3683.3
  Rate = 0.002 +/- 0.0006
[Fri Jun  7 12:05:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 12:05:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 12:05:30 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 12:05:30 2013] Source does appear to be extended
[Fri Jun  7 12:05:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 12:08:03 2013] XMMSAS src. selection expression = ellipse(27489.533000, 20232.226280, 349.251010, 349.251010, 0.000000, X, Y)
[Fri Jun  7 12:08:03 2013] Not overwriting source region fullrun_mos1_xmm0555630401_pi300-10000_pass1_cl_src150_src.reg
[Fri Jun  7 12:08:03 2013] Extracting stamp from image fullrun_mos1_xmm0555630401_pi300-10000_cl_sm2.00.img.gz, (296, 213) - (337, 253)
[Fri Jun  7 12:08:03 2013] XMMSAS bgd. selection expression = annulus(27489.533000, 20232.226280, 582.085017, 1164.170033, X, Y) && !ellipse(25451.974000, 19843.274800, 1446.800042, 1446.800042, 0.000000, X, Y) && !ellipse(27360.820880, 19245.826200, 1094.808032, 1094.808032, 0.000000, X, Y) && !ellipse(26787.073212, 19903.535400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29016.906200, 19210.624000, 1500.312043, 1500.312043, 0.000000, X, Y) && !ellipse(28133.459808, 18744.560684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.845400, 19655.418000, 1481.232043, 335.112010, 341.295300, X, Y) && !ellipse(28940.294006, 19518.430038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28361.329200, 20715.521200, 842.976024, 842.976024, 0.000000, X, Y) && !ellipse(25673.973419, 22064.824829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28486.632000, 20321.258000, 910.920026, 910.920026, 0.000000, X, Y) && !ellipse(26813.363400, 21235.575600, 1031.336030, 1031.336030, 0.000000, X, Y) && !ellipse(26287.336000, 18836.946000, 2893.600083, 2893.600083, 0.000000, X, Y) && !ellipse(26825.714000, 7620.258000, 12942.000372, 12942.000372, 0.000000, X, Y) && !ellipse(26247.173004, 21903.152130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28312.424713, 21336.142746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25529.399109, 20818.710724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27794.683380, 21294.626053, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 12:08:03 2013] Writing fullrun_mos1_xmm0555630401_pi300-10000_pass1_cl_src150.gif