[Mon May 27 08:08:16 2013] Detection parameters:
  Position = (296.5, 78.7) = 15 3 34.70 -41 57 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 756.7 +/- 51.6
  Background counts = 721.5
  Rate = 0.006 +/- 0.0004

[Mon May 27 08:08:42 2013] Off-axis axis estimate = 15.93'
[Mon May 27 08:12:30 2013] Using EEF radius (= 14.39 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:30 2013] Initial guess for spatial extent in simple fitting = 14.39"
[Mon May 27 08:12:30 2013] source mask rpix=3.3, npix_max = 58, mask sum = 44, frac = 0.758
[Mon May 27 08:12:30 2013] Giving source the simple spatial ID 77 for pass 0, mean size = 14.39"
[Mon May 27 08:12:34 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src77.ximg exists
[Mon May 27 08:12:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src77.csv
[Mon May 27 08:12:34 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src77_1.ximg exists
[Mon May 27 08:12:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src77.csv
[Mon May 27 08:12:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:36 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Mon May 27 08:12:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src77.csv
[Mon May 27 08:12:36 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Mon May 27 08:12:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src77.csv
[Mon May 27 08:12:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:13:32 2013] Spatial fit model total counts = 15243.100000, observed total counts = 10603.000000
[Mon May 27 08:13:32 2013] Poor agreement between spatial fit and data for source 84
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:13:32 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:13:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:13:32 2013] Assessing source extent using major
[Mon May 27 08:13:32 2013] Source does appear to be extended
[Mon May 27 08:13:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:42 2013] Using EEF radius (= 14.39 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:42 2013] Initial guess for spatial extent in simple fitting = 14.39"
[Mon May 27 08:15:42 2013] source mask rpix=3.3, npix_max = 58, mask sum = 44, frac = 0.758
[Mon May 27 08:15:42 2013] Giving source the simple spatial ID 75 for pass 1, mean size = 14.39"
[Mon May 27 08:15:45 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src75.ximg exists
[Mon May 27 08:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src75.csv
[Mon May 27 08:15:45 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src75_1.ximg exists
[Mon May 27 08:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src75.csv
[Mon May 27 08:15:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:48 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Mon May 27 08:15:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src75.csv
[Mon May 27 08:15:48 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Mon May 27 08:15:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src75.csv
[Mon May 27 08:15:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:16:47 2013] Spatial fit model total counts = 15852.800000, observed total counts = 10603.000000
[Mon May 27 08:16:47 2013] Poor agreement between spatial fit and data for source 84
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:16:47 2013] Spatial fit model total counts = 17687.900000, observed total counts = 11484.000000
[Mon May 27 08:16:47 2013] Poor agreement between spatial fit and data for source 84
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:16:47 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:16:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:16:47 2013] Assessing source extent using major
[Mon May 27 08:16:47 2013] Source does appear to be extended
[Mon May 27 08:16:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:16:47 2013] Source is confused with source 265
[Mon May 27 08:19:26 2013] XMMSAS src. selection expression = ellipse(25748.253174, 6799.191597, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 08:19:26 2013] Not overwriting source region fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_src.reg
[Mon May 27 08:19:26 2013] Extracting stamp from image fullrun_pn_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (259, 41) - (334, 116)
[Mon May 27 08:19:26 2013] XMMSAS bgd. selection expression = annulus(25748.253174, 6799.191597, 1087.500000, 2175.000000, X, Y) && !ellipse(19015.334615, 14283.533696, 5735.136165, 4195.862730, 108.233144, X, Y) && !ellipse(18179.854000, 12649.456000, 6013.776173, 6013.776173, 0.000000, X, Y) && !ellipse(18059.262413, 11905.958159, 5735.136165, 2817.426359, 106.701495, X, Y) && !ellipse(22896.480000, 20099.990000, 11407.464328, 11407.464328, 0.000000, X, Y) && !ellipse(27130.506561, 7371.582726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24041.666718, 9262.366486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27005.821075, 8991.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27293.820068, 8212.128494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24408.023590, 7110.197083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27841.186218, 8824.449936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26942.716339, 8574.384674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27697.753571, 7934.017494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26441.510529, 7054.539040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23966.832062, 9679.888428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25296.210541, 9604.587814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.284302, 9240.768486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24314.350000, 9754.532000, 2145.784062, 1548.640045, 154.218006, X, Y) && !ellipse(24096.116058, 8997.377968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25149.944977, 8726.911461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28270.000000, 8386.235359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23063.389313, 8477.381851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25666.377380, 8110.460785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28551.151672, 7958.121841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26254.907104, 7691.521721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.134003, 7965.118507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.084961, 8468.341476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22981.954254, 9641.447586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23082.011688, 9163.164635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25835.208038, 8638.648331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.064911, 8566.158066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24757.844000, 6819.446000, 2286.280066, 2286.280066, 0.000000, X, Y)
[Mon May 27 08:19:26 2013] Writing fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84.gif
[Mon May 27 08:20:58 2013] ../../xmm0555630301/products/events/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_src.evt and ../../xmm0555630301/products/events/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_bgd.evt exist, delete to re-create
[Mon May 27 08:20:59 2013] Mean detx,y = (5713.94, -16221.90) 
[Mon May 27 08:20:59 2013] ../../xmm0555630301/products/images/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_src.img and ../../xmm0555630301/products/images/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_bgd.img exist, delete to re-create
[Mon May 27 08:20:59 2013] ../../xmm0555630301/products/spectra/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_src_b10.pi.gz and ../../xmm0555630301/products/spectra/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_bgd.pi exist, delete to re-create
[Mon May 27 08:20:59 2013] Setting source spectrum file to fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Mon May 27 08:20:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_bgd.pi.gz
[Mon May 27 08:20:59 2013] ../../xmm0555630301/products/lightcurves/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_src.lc and ../../xmm0555630301/products/lightcurves/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src84_bgd.lc exist, delete to re-create