[Mon May 27 08:08:10 2013] Detection parameters:
  Position = (319.3, 296.1) = 15 3 25.86 -41 41 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2967.2 +/- 81.9
  Background counts = 710.0
  Rate = 0.04 +/- 0.001

[Mon May 27 08:08:42 2013] Off-axis axis estimate = 1.52'
[Mon May 27 08:12:30 2013] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:30 2013] Initial guess for spatial extent in simple fitting = 7.19"
[Mon May 27 08:12:30 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.863
[Mon May 27 08:12:30 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 7.19"
[Mon May 27 08:12:33 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src51.ximg exists
[Mon May 27 08:12:33 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src51_1.ximg exists
[Mon May 27 08:12:33 2013] Fit fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src51 appears to have run properly
[Mon May 27 08:12:35 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Mon May 27 08:12:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Mon May 27 08:12:35 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Mon May 27 08:12:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Mon May 27 08:12:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:13:31 2013] Warning, spatial fit 51 centroid is now closest to src. 18
[Mon May 27 08:13:32 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:13:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:13:32 2013] Assessing source extent using major
[Mon May 27 08:13:32 2013] Source does appear to be extended
[Mon May 27 08:13:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:42 2013] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:42 2013] Initial guess for spatial extent in simple fitting = 7.19"
[Mon May 27 08:15:42 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.863
[Mon May 27 08:15:42 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 7.19"
[Mon May 27 08:15:44 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src50.ximg exists
[Mon May 27 08:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src50.csv
[Mon May 27 08:15:44 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src50_1.ximg exists
[Mon May 27 08:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src50.csv
[Mon May 27 08:15:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:47 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Mon May 27 08:15:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src50.csv
[Mon May 27 08:15:47 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Mon May 27 08:15:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src50.csv
[Mon May 27 08:15:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:16:46 2013] Source 53 is offset by 3.138365 and -7.534875 pixels which is larger than
2 X fitted extent = 6.610437 x 6.610437, not incorporating fit results
[Mon May 27 08:16:47 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:16:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:16:47 2013] Assessing source extent using major
[Mon May 27 08:16:47 2013] Source does appear to be extended
[Mon May 27 08:16:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:19:22 2013] Counts = 2967.194824, rescaling region sizes by 2.000000
[Mon May 27 08:19:22 2013] XMMSAS src. selection expression = ellipse(27728.583771, 25710.073853, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 27 08:19:22 2013] Not overwriting source region fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_src.reg
[Mon May 27 08:19:22 2013] Extracting stamp from image fullrun_pn_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (244, 221) - (394, 371)
[Mon May 27 08:19:22 2013] XMMSAS bgd. selection expression = annulus(27728.583771, 25710.073853, 4350.000000, 8700.000000, X, Y) && !ellipse(26640.908539, 18845.589859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19916.278000, 18485.768000, 1065.648031, 1065.648031, 0.000000, X, Y) && !ellipse(20504.260000, 17500.398000, 4969.320143, 4969.320143, 0.000000, X, Y) && !ellipse(19179.908000, 15001.794000, 5735.136165, 5735.136165, 0.000000, X, Y) && !ellipse(19015.334615, 14283.533696, 5735.136165, 4195.862730, 108.233144, X, Y) && !ellipse(18179.854000, 12649.456000, 6013.776173, 6013.776173, 0.000000, X, Y) && !ellipse(18059.262413, 11905.958159, 5735.136165, 2817.426359, 106.701495, X, Y) && !ellipse(25554.352000, 24828.364600, 3377.328097, 3377.328097, 0.000000, X, Y) && !ellipse(24629.890000, 21978.644000, 4004.496115, 4004.496115, 0.000000, X, Y) && !ellipse(22567.866000, 19439.670000, 9727.632280, 9727.632280, -0.000000, X, Y) && !ellipse(21549.792000, 18818.790000, 4863.816140, 4863.816140, 0.000000, X, Y) && !ellipse(20740.914383, 18046.326477, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(19699.574400, 15969.802000, 5341.752154, 5341.752154, 0.000000, X, Y) && !ellipse(22930.682983, 23697.593506, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(32072.793152, 26218.124329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30250.571600, 25745.238800, 1062.568031, 1062.568031, 0.000000, X, Y) && !ellipse(29415.602000, 25757.056400, 1635.232047, 1635.232047, 0.000000, X, Y) && !ellipse(37673.554000, 24620.394600, 1845.752053, 1845.752053, 0.000000, X, Y) && !ellipse(27463.556091, 23255.151459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29982.313354, 24212.085083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21609.243042, 22655.890106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40179.290000, 22671.942000, 12405.936357, 12405.936357, 0.000000, X, Y) && !ellipse(26697.369600, 22661.832000, 4186.320120, 4186.320120, 359.277000, X, Y) && !ellipse(22578.115978, 22535.592000, 10683.504307, 10683.504307, 78.835000, X, Y) && !ellipse(23693.486176, 21862.477081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21456.913391, 22013.400894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20848.461655, 21651.651825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25802.521973, 22649.414490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.572449, 21352.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21698.374000, 20607.117400, 4515.456130, 4515.456130, 0.000000, X, Y) && !ellipse(41346.302000, 22161.920000, 13026.816375, 13026.816375, 0.000000, X, Y) && !ellipse(20604.525000, 20790.422200, 3192.192092, 3192.192092, 0.000000, X, Y) && !ellipse(22896.480000, 20099.990000, 11407.464328, 11407.464328, 0.000000, X, Y) && !ellipse(21515.954000, 16469.006000, 5267.376152, 5267.376152, 0.000000, X, Y) && !ellipse(33204.523285, 26281.494568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37026.655670, 24674.028320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35712.532000, 24263.068000, 1655.264048, 1655.264048, 0.000000, X, Y) && !ellipse(35637.665260, 24584.804400, 961.816028, 961.816028, 0.000000, X, Y) && !ellipse(34273.015930, 23132.236877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37224.864227, 22996.280792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33447.939026, 23006.600891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44649.794000, 19552.166000, 10301.376296, 10301.376296, 0.000000, X, Y) && !ellipse(34591.864000, 25824.274200, 1635.232047, 1168.152034, 0.000000, X, Y) && !ellipse(32195.959961, 24581.981110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31555.997000, 33169.192780, 421.465612, 421.465612, 0.000000, X, Y) && !ellipse(26222.157318, 32617.092743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36827.682465, 29959.838531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28957.989777, 26327.755798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35505.602000, 25352.024000, 1635.232047, 1635.232047, 0.000000, X, Y) && !ellipse(33731.466949, 25611.574921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32587.382965, 25219.812073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34140.614929, 25006.684906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32768.145325, 24405.429626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34561.614000, 23515.572000, 1655.264048, 1655.264048, 0.000000, X, Y) && !ellipse(35054.558319, 23714.490112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36755.643555, 23604.890503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31586.738600, 22987.147000, 1387.896040, 817.744024, 342.659793, X, Y) && !ellipse(29969.653800, 22335.144000, 1154.992033, 1154.992033, 0.000000, X, Y) && !ellipse(32619.115875, 21640.852493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29840.633026, 21565.581085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.327820, 21452.629501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36859.540161, 21084.319855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26656.204163, 20838.239792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37057.576141, 20572.630661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.387939, 20138.646210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25441.076904, 18824.684158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24184.613495, 19030.699829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25283.469055, 18411.049179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29721.331940, 16905.400650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.701874, 17267.228043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33702.596161, 17018.309753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33706.514984, 16392.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31576.002655, 16661.607895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36857.466583, 16480.254791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29022.050323, 16489.204895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21558.209396, 32166.921906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32778.709686, 31764.761963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21136.840317, 30572.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18844.064545, 27316.159485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23049.994690, 25429.641693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34159.261200, 24417.674622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28508.681824, 20855.444382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31925.569122, 20339.905396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36250.614502, 20654.785233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25297.970825, 19425.084518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32124.388336, 18214.371246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28235.301422, 17612.170776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35490.081360, 17528.666122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33672.334137, 17416.706192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31500.408661, 17091.499619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28387.793030, 16309.247009, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:19:22 2013] Writing fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53.gif
[Mon May 27 08:20:50 2013] ../../xmm0555630301/products/events/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_src.evt and ../../xmm0555630301/products/events/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_bgd.evt exist, delete to re-create
[Mon May 27 08:20:51 2013] Mean detx,y = (-2524.62, 262.51) 
[Mon May 27 08:20:51 2013] ../../xmm0555630301/products/images/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_src.img and ../../xmm0555630301/products/images/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_bgd.img exist, delete to re-create
[Mon May 27 08:20:51 2013] ../../xmm0555630301/products/spectra/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_src_b10.pi.gz and ../../xmm0555630301/products/spectra/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_bgd.pi exist, delete to re-create
[Mon May 27 08:20:51 2013] Setting source spectrum file to fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon May 27 08:20:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Mon May 27 08:20:51 2013] ../../xmm0555630301/products/lightcurves/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_src.lc and ../../xmm0555630301/products/lightcurves/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src53_bgd.lc exist, delete to re-create