[Mon May 27 08:08:10 2013] Detection parameters:
  Position = (178.2, 357.3) = 15 4 20.60 -41 36 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6562.1 +/- 98.0
  Background counts = 209.8
  Rate = 0.06 +/- 0.0008

[Mon May 27 08:08:42 2013] Off-axis axis estimate = 9.71'
[Mon May 27 08:12:30 2013] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:30 2013] Initial guess for spatial extent in simple fitting = 11.28"
[Mon May 27 08:12:30 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.940
[Mon May 27 08:12:30 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 11.28"
[Mon May 27 08:12:33 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src49.ximg exists
[Mon May 27 08:12:33 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon May 27 08:12:33 2013] Fit fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src49 appears to have run properly
[Mon May 27 08:12:35 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon May 27 08:12:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon May 27 08:12:35 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon May 27 08:12:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon May 27 08:12:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:13:31 2013] Spatial fit model total counts = 7846.560000, observed total counts = 7439.000000
[Mon May 27 08:13:31 2013] Offset between fit and detection position for source 51 = 0.203226 pixels
[Mon May 27 08:13:31 2013] 7827.350000 total counts/ 3312.580000 bgd. counts: snr = 78.442684
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.203226 pixels
  Position = (178.1, 357.5) = 15 4 20.62 -41 36 56.4
  Extent = 6.8" x 4.6", rotation angle = 126
  Source counts = 4514.8 +/- 88.5
  Background counts = 3312.6
  Rate = 0.05 +/- 0.0009
[Mon May 27 08:13:32 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:13:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:13:32 2013] Assessing source extent using major
[Mon May 27 08:13:32 2013] Source does appear to be extended
[Mon May 27 08:13:32 2013] Computing asymmetry using major and minor axis, asym = 1.48
[Mon May 27 08:15:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:42 2013] Initial guess for spatial extent in simple fitting = 5.73"
[Mon May 27 08:15:42 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.909
[Mon May 27 08:15:42 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 5.73"
[Mon May 27 08:15:44 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src48.ximg exists
[Mon May 27 08:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src48.csv
[Mon May 27 08:15:44 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon May 27 08:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src48.csv
[Mon May 27 08:15:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:47 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon May 27 08:15:47 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon May 27 08:15:47 2013] Fit fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Mon May 27 08:16:46 2013] Spatial fit model total counts = 7866.300000, observed total counts = 7439.000000
[Mon May 27 08:16:46 2013] Offset between fit and detection position for source 51 = 0.006207 pixels
[Mon May 27 08:16:46 2013] 7845.970000 total counts/ 3393.870000 bgd. counts: snr = 76.421808
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.006207 pixels
  Position = (178.1, 357.5) = 15 4 20.62 -41 36 56.5
  Extent = 5.6 (5.5-5.8)", rotation angle = 0
  Source counts = 4452.1 +/- 88.6
  Background counts = 3393.9
  Rate = 0.05 +/- 0.0009
[Mon May 27 08:16:47 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:16:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:16:47 2013] Assessing source extent using major axis lower bound
[Mon May 27 08:16:47 2013] Source does appear to be extended
[Mon May 27 08:16:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:19:22 2013] Counts = 4452.100000, rescaling region sizes by 2.000000
[Mon May 27 08:19:22 2013] XMMSAS src. selection expression = ellipse(15447.967800, 31050.261600, 677.077219, 677.077219, 0.000000, X, Y)
[Mon May 27 08:19:22 2013] Not overwriting source region fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_src.reg
[Mon May 27 08:19:22 2013] Extracting stamp from image fullrun_pn_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (139, 319) - (217, 396)
[Mon May 27 08:19:22 2013] XMMSAS bgd. selection expression = annulus(15447.967800, 31050.261600, 2256.924065, 4513.848130, X, Y) && !ellipse(22567.866000, 19439.670000, 9727.632280, 9727.632280, -0.000000, X, Y) && !ellipse(22578.115978, 22535.592000, 10683.504307, 10683.504307, 78.835000, X, Y) && !ellipse(22896.480000, 20099.990000, 11407.464328, 11407.464328, 0.000000, X, Y) && !ellipse(16945.157059, 34215.906250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17815.227417, 30527.823639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13288.517960, 29439.399689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18844.064545, 27316.159485, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:19:22 2013] Writing fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51.gif
[Mon May 27 08:20:50 2013] ../../xmm0555630301/products/events/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_src.evt and ../../xmm0555630301/products/events/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_bgd.evt exist, delete to re-create
[Mon May 27 08:20:50 2013] Mean detx,y = (6974.34, 9906.90) 
[Mon May 27 08:20:50 2013] ../../xmm0555630301/products/images/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_src.img and ../../xmm0555630301/products/images/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_bgd.img exist, delete to re-create
[Mon May 27 08:20:50 2013] ../../xmm0555630301/products/spectra/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_src_b10.pi.gz and ../../xmm0555630301/products/spectra/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_bgd.pi exist, delete to re-create
[Mon May 27 08:20:50 2013] Setting source spectrum file to fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Mon May 27 08:20:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Mon May 27 08:20:50 2013] ../../xmm0555630301/products/lightcurves/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_src.lc and ../../xmm0555630301/products/lightcurves/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src51_bgd.lc exist, delete to re-create