[Mon May 27 08:08:19 2013] Detection parameters:
  Position = (403.5, 273.1) = 15 2 53.14 -41 43 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 769.6 +/- 52.7
  Background counts = 717.6
  Rate = 0.006 +/- 0.0004

[Mon May 27 08:08:42 2013] Off-axis axis estimate = 7.83'
[Mon May 27 08:12:30 2013] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:30 2013] Initial guess for spatial extent in simple fitting = 10.35"
[Mon May 27 08:12:30 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.905
[Mon May 27 08:12:30 2013] Giving source the simple spatial ID 97 for pass 0, mean size = 10.35"
[Mon May 27 08:12:34 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src97.ximg exists
[Mon May 27 08:12:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src97.csv
[Mon May 27 08:12:34 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src97_1.ximg exists
[Mon May 27 08:12:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src97.csv
[Mon May 27 08:12:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:36 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Mon May 27 08:12:36 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Mon May 27 08:12:36 2013] Fit fullrun_pn_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src97 appears to have run properly
[Mon May 27 08:13:32 2013] Source 105 is offset by -0.762295 and 5.383542 pixels which is larger than
2 X fitted extent = 1.155715 x 1.155715, not incorporating fit results
[Mon May 27 08:13:32 2013] Warning, spatial fit 97 centroid is now closest to src. 101
[Mon May 27 08:13:32 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:13:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:13:32 2013] Assessing source extent using major
[Mon May 27 08:13:32 2013] Source does appear to be extended
[Mon May 27 08:13:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:13:32 2013] Source is confused with source 101
[Mon May 27 08:15:42 2013] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:42 2013] Initial guess for spatial extent in simple fitting = 10.35"
[Mon May 27 08:15:42 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.905
[Mon May 27 08:15:42 2013] Giving source the simple spatial ID 95 for pass 1, mean size = 10.35"
[Mon May 27 08:15:45 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src95.ximg exists
[Mon May 27 08:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src95.csv
[Mon May 27 08:15:45 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src95_1.ximg exists
[Mon May 27 08:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src95.csv
[Mon May 27 08:15:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src95_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:49 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src95.ximg exists
[Mon May 27 08:15:49 2013] fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src95_1.ximg exists
[Mon May 27 08:15:49 2013] Fit fullrun_pn_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src95 appears to have run properly
[Mon May 27 08:16:47 2013] Warning, spatial fit 95 centroid is now closest to src. 56
[Mon May 27 08:16:47 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:16:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:16:47 2013] Assessing source extent using major
[Mon May 27 08:16:47 2013] Source does appear to be extended
[Mon May 27 08:16:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:19:28 2013] XMMSAS src. selection expression = ellipse(35054.558319, 23714.490112, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 08:19:28 2013] Not overwriting source region fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_src.reg
[Mon May 27 08:19:28 2013] Extracting stamp from image fullrun_pn_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (366, 236) - (441, 311)
[Mon May 27 08:19:28 2013] XMMSAS bgd. selection expression = annulus(35054.558319, 23714.490112, 1087.500000, 2175.000000, X, Y) && !ellipse(32072.793152, 26218.124329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37673.554000, 24620.394600, 1845.752053, 1845.752053, 0.000000, X, Y) && !ellipse(38740.250720, 23474.165065, 1938.120056, 1938.120056, 28.225156, X, Y) && !ellipse(40179.290000, 22671.942000, 12405.936357, 12405.936357, 0.000000, X, Y) && !ellipse(22578.115978, 22535.592000, 10683.504307, 10683.504307, 78.835000, X, Y) && !ellipse(41346.302000, 22161.920000, 13026.816375, 13026.816375, 0.000000, X, Y) && !ellipse(22896.480000, 20099.990000, 11407.464328, 11407.464328, 0.000000, X, Y) && !ellipse(33204.523285, 26281.494568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37026.655670, 24674.028320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35712.532000, 24263.068000, 1655.264048, 1655.264048, 0.000000, X, Y) && !ellipse(35637.665260, 24584.804400, 961.816028, 961.816028, 0.000000, X, Y) && !ellipse(34273.015930, 23132.236877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37224.864227, 22996.280792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33447.939026, 23006.600891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44649.794000, 19552.166000, 10301.376296, 10301.376296, 0.000000, X, Y) && !ellipse(34591.864000, 25824.274200, 1635.232047, 1168.152034, 0.000000, X, Y) && !ellipse(32195.959961, 24581.981110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35505.602000, 25352.024000, 1635.232047, 1635.232047, 0.000000, X, Y) && !ellipse(33731.466949, 25611.574921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32587.382965, 25219.812073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34140.614929, 25006.684906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32768.145325, 24405.429626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34561.614000, 23515.572000, 1655.264048, 1655.264048, 0.000000, X, Y) && !ellipse(36755.643555, 23604.890503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31586.738600, 22987.147000, 1387.896040, 817.744024, 342.659793, X, Y) && !ellipse(32619.115875, 21640.852493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37487.000580, 21684.583481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36859.540161, 21084.319855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37905.496918, 20730.400467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34159.261200, 24417.674622, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:19:28 2013] Writing fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105.gif
[Mon May 27 08:21:03 2013] ../../xmm0555630301/products/events/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_src.evt and ../../xmm0555630301/products/events/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_bgd.evt exist, delete to re-create
[Mon May 27 08:21:03 2013] Mean detx,y = (-8882.54, -3742.90) 
[Mon May 27 08:21:03 2013] ../../xmm0555630301/products/images/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_src.img and ../../xmm0555630301/products/images/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_bgd.img exist, delete to re-create
[Mon May 27 08:21:03 2013] ../../xmm0555630301/products/spectra/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_src_b10.pi.gz and ../../xmm0555630301/products/spectra/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_bgd.pi exist, delete to re-create
[Mon May 27 08:21:03 2013] Setting source spectrum file to fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Mon May 27 08:21:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Mon May 27 08:21:03 2013] ../../xmm0555630301/products/lightcurves/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_src.lc and ../../xmm0555630301/products/lightcurves/fullrun_pn_xmm0555630301_pi300-10000_pass1_cl_src105_bgd.lc exist, delete to re-create