[Mon May 27 08:09:14 2013] Detection parameters:
  Position = (243.0, 212.0) = 15 3 55.52 -41 47 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4288.6 +/- 93.0
  Background counts = 595.9
  Rate = 0.05 +/- 0.001

[Mon May 27 08:09:42 2013] Off-axis axis estimate = 7.45'
[Mon May 27 08:12:43 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:43 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Mon May 27 08:12:43 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.121
[Mon May 27 08:12:43 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 10.15"
[Mon May 27 08:12:44 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src12.ximg exists
[Mon May 27 08:12:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src12.csv
[Mon May 27 08:12:44 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon May 27 08:12:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src12.csv
[Mon May 27 08:12:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:46 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon May 27 08:12:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon May 27 08:12:46 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon May 27 08:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon May 27 08:12:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:14:29 2013] Warning, spatial fit 12 centroid is now closest to src. 37
[Mon May 27 08:14:31 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:31 2013] Assessing source extent using major
[Mon May 27 08:14:31 2013] Source does appear to be extended
[Mon May 27 08:14:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:31 2013] Source is confused with source 11
[Mon May 27 08:14:31 2013] Source is confused with source 7
[Mon May 27 08:15:57 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:57 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Mon May 27 08:15:57 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.121
[Mon May 27 08:15:57 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.15"
[Mon May 27 08:15:58 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 27 08:15:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src11.csv
[Mon May 27 08:15:58 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 27 08:15:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src11.csv
[Mon May 27 08:15:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:16:01 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 27 08:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 27 08:16:01 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 27 08:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 27 08:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:17:55 2013] Spatial fit model total counts = 26274.900000, observed total counts = 23801.000000
[Mon May 27 08:17:55 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:17:56 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:56 2013] Assessing source extent using major
[Mon May 27 08:17:56 2013] Source does appear to be extended
[Mon May 27 08:17:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 21:01:53 2013] Counts = 4288.584961, rescaling region sizes by 2.000000
[Mon May 27 21:01:53 2013] XMMSAS src. selection expression = ellipse(21090.455627, 18396.206238, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 27 21:01:53 2013] Writing source region out to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src9_src.reg
[Mon May 27 21:01:53 2013] Extracting stamp from image fullrun_mos2_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (168, 137) - (318, 287)
[Mon May 27 21:01:53 2013] XMMSAS bgd. selection expression = annulus(21090.455627, 18396.206238, 4350.000000, 8700.000000, X, Y) && !ellipse(25074.027400, 24654.902200, 1035.224030, 1035.224030, 0.000000, X, Y) && !ellipse(25008.150000, 24564.774000, 5096.688147, 5096.688147, 0.000000, X, Y) && !ellipse(23828.894000, 24074.806000, 1254.296036, 1254.296036, 0.000000, X, Y) && !ellipse(19954.004852, 18210.910416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23581.374000, 23850.534000, 7525.776217, 7525.776217, 0.000000, X, Y) && !ellipse(19034.786000, 16648.568000, 1253.096036, 1253.096036, 0.000000, X, Y) && !ellipse(19686.774000, 15875.572000, 1758.032051, 1758.032051, 0.000000, X, Y) && !ellipse(20648.954000, 17932.710000, 1444.568042, 1444.568042, 0.000000, X, Y) && !ellipse(20467.765000, 19588.778000, 1607.456046, 1607.456046, 0.000000, X, Y) && !ellipse(19812.588200, 16817.666000, 10458.096301, 10458.096301, 0.000000, X, Y) && !ellipse(21664.762400, 18918.838000, 2889.136083, 958.064028, 308.622000, X, Y) && !ellipse(18970.003204, 15607.836060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22911.640000, 23507.768000, 1254.296036, 1254.296036, 0.000000, X, Y) && !ellipse(18965.134000, 14154.470000, 5916.624170, 5916.624170, 0.000000, X, Y) && !ellipse(20652.047000, 20401.702000, 2953.728085, 1046.064030, 109.511200, X, Y) && !ellipse(18387.056000, 13205.386000, 5922.048170, 5922.048170, 0.000000, X, Y) && !ellipse(21882.762000, 19289.836000, 2090.568060, 821.744024, 135.734000, X, Y) && !ellipse(19344.451279, 17003.388489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22123.402000, 19642.822000, 6700.080193, 6700.080193, 0.000000, X, Y) && !ellipse(24512.934892, 21400.647845, 8691.936250, 4387.870545, 136.033697, X, Y) && !ellipse(22542.752000, 19843.404000, 4345.968125, 4345.968125, 0.000000, X, Y) && !ellipse(23159.808400, 21921.409000, 326.793609, 326.793609, 0.000000, X, Y) && !ellipse(21776.536600, 20704.068000, 1524.392044, 1524.392044, 0.000000, X, Y) && !ellipse(23423.598000, 20501.022000, 8691.936250, 5599.488161, 135.932300, X, Y) && !ellipse(18193.375000, 12158.484000, 2012.576058, 2012.576058, 0.000000, X, Y) && !ellipse(21588.359600, 22201.206000, 1410.192041, 1410.192041, 0.000000, X, Y) && !ellipse(23258.528000, 22058.086000, 2109.104061, 2109.104061, 5.829000, X, Y) && !ellipse(22471.892000, 23579.619600, 1318.856038, 1318.856038, 0.000000, X, Y) && !ellipse(29888.964000, 25502.986000, 1831.496053, 1831.496053, 0.000000, X, Y) && !ellipse(21112.810000, 21290.158000, 2051.240059, 2051.240059, 0.000000, X, Y) && !ellipse(30402.407200, 25767.526400, 1302.096037, 640.484818, 342.568000, X, Y) && !ellipse(21569.164000, 16467.352000, 1700.944049, 1700.944049, 0.000000, X, Y) && !ellipse(17811.599200, 10306.152800, 1676.072048, 1676.072048, 0.000000, X, Y) && !ellipse(25903.150238, 12497.109482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29265.225980, 25089.947800, 853.336025, 853.336025, 0.000000, X, Y) && !ellipse(29569.180000, 24900.936000, 9758.736281, 9758.736281, 0.000000, X, Y) && !ellipse(26939.144000, 23138.604000, 1225.304035, 1225.304035, 0.000000, X, Y) && !ellipse(28617.419000, 25332.543400, 1215.072035, 1215.072035, 0.000000, X, Y) && !ellipse(21160.818000, 13547.396000, 1346.128039, 1346.128039, 0.000000, X, Y) && !ellipse(25760.676056, 22161.595337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.848145, 23260.166809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17685.610214, 9608.841171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27840.098000, 23449.490000, 1012.664029, 1012.664029, 0.000000, X, Y) && !ellipse(27354.843262, 25684.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19777.432129, 19326.778076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32827.046000, 26595.072000, 3088.144089, 3088.144089, 0.000000, X, Y) && !ellipse(28143.617800, 25880.411200, 697.676820, 697.676820, 0.000000, X, Y) && !ellipse(30882.968000, 24506.225400, 1402.224040, 1402.224040, 0.000000, X, Y) && !ellipse(28651.734802, 23968.818024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21603.899796, 15250.601868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28961.433350, 14293.364243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27539.293457, 20118.631271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22385.536438, 15552.549057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28968.793091, 26304.295959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21619.171524, 12740.222549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28191.084564, 16419.908630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26718.880000, 8848.390000, 2204.488063, 1274.240037, 344.476800, X, Y) && !ellipse(20565.685104, 11100.741959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29685.080170, 16955.566101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29622.713531, 15530.027771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29175.760590, 15619.401367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25342.139020, 18548.571200, 1512.736044, 1512.736044, 0.000000, X, Y) && !ellipse(22158.078751, 12750.318298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.150000, 24352.048000, 2400.368069, 2400.368069, 0.000000, X, Y) && !ellipse(22450.762543, 15091.027969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27095.850464, 9961.642128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29204.971222, 16571.870560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25602.585240, 18960.162400, 999.256029, 999.256029, 0.000000, X, Y) && !ellipse(28461.369202, 22838.741974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26552.050018, 21024.401154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21079.381500, 11350.997055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24258.014435, 10014.211044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26898.966766, 12480.884598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.045331, 20512.631545, 1357.392039, 1290.993114, 238.937197, X, Y) && !ellipse(22923.461304, 15232.444122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.073883, 9635.467133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23858.283844, 9610.227760, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 21:01:53 2013] Writing fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src9.gif
[Mon May 27 21:33:41 2013] Mean detx,y = (-5905.38, 3737.92) 
[Mon May 27 21:33:43 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 21:34:54 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 21:34:55 2013] Setting source spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 27 21:34:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue May 28 10:25:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 10:25:59 2013] rmf not generated due to insufficient counts