[Mon May 27 08:09:22 2013] Detection parameters:
  Position = (248.9, 175.9) = 15 3 53.24 -41 50 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 837.3 +/- 47.9
  Background counts = 612.4
  Rate = 0.007 +/- 0.0004

[Mon May 27 08:09:42 2013] Off-axis axis estimate = 9.59'
[Mon May 27 08:12:43 2013] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:43 2013] Initial guess for spatial extent in simple fitting = 11.22"
[Mon May 27 08:12:43 2013] source mask rpix=2.6, npix_max = 37, mask sum = 35, frac = 0.923
[Mon May 27 08:12:43 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 11.22"
[Mon May 27 08:12:45 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src57.ximg exists
[Mon May 27 08:12:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src57.csv
[Mon May 27 08:12:45 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src57_1.ximg exists
[Mon May 27 08:12:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src57.csv
[Mon May 27 08:12:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:48 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Mon May 27 08:12:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src57.csv
[Mon May 27 08:12:48 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Mon May 27 08:12:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src57.csv
[Mon May 27 08:12:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:14:30 2013] Warning, spatial fit 57 centroid is now closest to src. 58
[Mon May 27 08:14:31 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:31 2013] Assessing source extent using major
[Mon May 27 08:14:31 2013] Source does appear to be extended
[Mon May 27 08:14:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:31 2013] Source is confused with source 37
[Mon May 27 08:15:57 2013] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:57 2013] Initial guess for spatial extent in simple fitting = 11.22"
[Mon May 27 08:15:57 2013] source mask rpix=2.6, npix_max = 37, mask sum = 35, frac = 0.923
[Mon May 27 08:15:57 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 11.22"
[Mon May 27 08:15:59 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src54.ximg exists
[Mon May 27 08:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src54.csv
[Mon May 27 08:15:59 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon May 27 08:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src54.csv
[Mon May 27 08:15:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:16:02 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon May 27 08:16:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src54.csv
[Mon May 27 08:16:02 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon May 27 08:16:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src54.csv
[Mon May 27 08:16:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:17:56 2013] Warning, spatial fit 54 centroid is now closest to src. 58
[Mon May 27 08:17:56 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:56 2013] Assessing source extent using major
[Mon May 27 08:17:56 2013] Source does appear to be extended
[Mon May 27 08:17:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 21:02:06 2013] XMMSAS src. selection expression = ellipse(21603.899796, 15250.601868, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 21:02:06 2013] Writing source region out to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src60_src.reg
[Mon May 27 21:02:06 2013] Extracting stamp from image fullrun_mos2_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (211, 138) - (286, 213)
[Mon May 27 21:02:06 2013] XMMSAS bgd. selection expression = annulus(21603.899796, 15250.601868, 1087.500000, 2175.000000, X, Y) && !ellipse(19954.004852, 18210.910416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23581.374000, 23850.534000, 7525.776217, 7525.776217, 0.000000, X, Y) && !ellipse(19034.786000, 16648.568000, 1253.096036, 1253.096036, 0.000000, X, Y) && !ellipse(19686.774000, 15875.572000, 1758.032051, 1758.032051, 0.000000, X, Y) && !ellipse(20648.954000, 17932.710000, 1444.568042, 1444.568042, 0.000000, X, Y) && !ellipse(19812.588200, 16817.666000, 10458.096301, 10458.096301, 0.000000, X, Y) && !ellipse(21664.762400, 18918.838000, 2889.136083, 958.064028, 308.622000, X, Y) && !ellipse(18970.003204, 15607.836060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18965.134000, 14154.470000, 5916.624170, 5916.624170, 0.000000, X, Y) && !ellipse(18387.056000, 13205.386000, 5922.048170, 5922.048170, 0.000000, X, Y) && !ellipse(21882.762000, 19289.836000, 2090.568060, 821.744024, 135.734000, X, Y) && !ellipse(19344.451279, 17003.388489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22123.402000, 19642.822000, 6700.080193, 6700.080193, 0.000000, X, Y) && !ellipse(24512.934892, 21400.647845, 8691.936250, 4387.870545, 136.033697, X, Y) && !ellipse(22542.752000, 19843.404000, 4345.968125, 4345.968125, 0.000000, X, Y) && !ellipse(23423.598000, 20501.022000, 8691.936250, 5599.488161, 135.932300, X, Y) && !ellipse(18193.375000, 12158.484000, 2012.576058, 2012.576058, 0.000000, X, Y) && !ellipse(21569.164000, 16467.352000, 1700.944049, 1700.944049, 0.000000, X, Y) && !ellipse(29569.180000, 24900.936000, 9758.736281, 9758.736281, 0.000000, X, Y) && !ellipse(21160.818000, 13547.396000, 1346.128039, 1346.128039, 0.000000, X, Y) && !ellipse(22385.536438, 15552.549057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21619.171524, 12740.222549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22158.078751, 12750.318298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22450.762543, 15091.027969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22923.461304, 15232.444122, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 21:02:06 2013] Writing fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src60.gif
[Tue May 28 00:08:20 2013] Mean detx,y = (-6497.59, 7044.90) 
[Tue May 28 00:08:23 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 00:09:04 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 00:09:05 2013] Setting source spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Tue May 28 00:09:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Tue May 28 16:18:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 16:18:00 2013] rmf not generated due to insufficient counts