[Mon May 27 08:09:20 2013] Detection parameters:
  Position = (311.9, 88.1) = 15 3 28.69 -41 56 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 414.3 +/- 36.1
  Background counts = 287.7
  Rate = 0.003 +/- 0.0003

[Mon May 27 08:09:42 2013] Off-axis axis estimate = 15.28'
[Mon May 27 08:12:43 2013] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:43 2013] Initial guess for spatial extent in simple fitting = 14.07"
[Mon May 27 08:12:43 2013] source mask rpix=3.2, npix_max = 55, mask sum = 61, frac = 1.094
[Mon May 27 08:12:43 2013] Giving source the simple spatial ID 82 for pass 0, mean size = 14.07"
[Mon May 27 08:12:46 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src82.ximg exists
[Mon May 27 08:12:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src82.csv
[Mon May 27 08:12:46 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src82_1.ximg exists
[Mon May 27 08:12:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src82.csv
[Mon May 27 08:12:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:49 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Mon May 27 08:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src82.csv
[Mon May 27 08:12:49 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Mon May 27 08:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src82.csv
[Mon May 27 08:12:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:14:30 2013] Spatial fit model total counts = 4653.150000, observed total counts = 3443.000000
[Mon May 27 08:14:30 2013] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:14:30 2013] Source 50 is offset by 2.580826 and 4.175735 pixels which is larger than
2 X fitted extent = 1.583687 x 1.583687, not incorporating fit results
[Mon May 27 08:14:31 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:31 2013] Assessing source extent using major
[Mon May 27 08:14:31 2013] Source does appear to be extended
[Mon May 27 08:14:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:57 2013] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:57 2013] Initial guess for spatial extent in simple fitting = 14.07"
[Mon May 27 08:15:57 2013] source mask rpix=3.2, npix_max = 55, mask sum = 61, frac = 1.094
[Mon May 27 08:15:57 2013] Giving source the simple spatial ID 78 for pass 1, mean size = 14.07"
[Mon May 27 08:16:00 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src78.ximg exists
[Mon May 27 08:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src78.csv
[Mon May 27 08:16:00 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src78_1.ximg exists
[Mon May 27 08:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src78.csv
[Mon May 27 08:16:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:16:03 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Mon May 27 08:16:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src78.csv
[Mon May 27 08:16:03 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Mon May 27 08:16:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src78.csv
[Mon May 27 08:16:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:17:56 2013] Spatial fit model total counts = 4628.820000, observed total counts = 3443.000000
[Mon May 27 08:17:56 2013] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:17:56 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:56 2013] Assessing source extent using major
[Mon May 27 08:17:56 2013] Source does appear to be extended
[Mon May 27 08:17:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:17:56 2013] Source is confused with source 65
[Mon May 27 21:02:10 2013] XMMSAS src. selection expression = ellipse(27089.481049, 7617.472954, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 21:02:10 2013] Writing source region out to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src50_src.reg
[Mon May 27 21:02:10 2013] Extracting stamp from image fullrun_mos2_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (274, 51) - (349, 126)
[Mon May 27 21:02:10 2013] XMMSAS bgd. selection expression = annulus(27089.481049, 7617.472954, 1087.500000, 2175.000000, X, Y) && !ellipse(19812.588200, 16817.666000, 10458.096301, 10458.096301, 0.000000, X, Y) && !ellipse(26718.880000, 8848.390000, 2204.488063, 1274.240037, 344.476800, X, Y) && !ellipse(27106.619263, 8316.957680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27095.850464, 9961.642128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25713.416534, 7333.042320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24118.577606, 7380.656952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27801.459015, 7781.314148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24258.014435, 10014.211044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28783.145477, 8141.752296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24862.620361, 8212.818802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29029.136597, 7696.249664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25104.336884, 7778.734123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24866.435638, 7300.856728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26357.531952, 7372.531898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28471.917633, 7616.872253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.073883, 9635.467133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25804.107025, 7961.303230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27328.391205, 8399.274872, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 21:02:10 2013] Writing fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src50.gif
[Tue May 28 00:34:24 2013] Mean detx,y = (-3849.44, 15908.03) 
[Tue May 28 00:34:26 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 00:34:58 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 00:34:58 2013] Setting source spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue May 28 00:34:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Tue May 28 16:45:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 16:45:45 2013] rmf not generated due to insufficient counts