[Mon May 27 08:09:19 2013] Detection parameters:
  Position = (177.9, 357.3) = 15 4 20.70 -41 36 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2966.7 +/- 67.6
  Background counts = 158.3
  Rate = 0.04 +/- 0.001

[Mon May 27 08:09:42 2013] Off-axis axis estimate = 9.72'
[Mon May 27 08:12:43 2013] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:43 2013] Initial guess for spatial extent in simple fitting = 11.29"
[Mon May 27 08:12:43 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939
[Mon May 27 08:12:43 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 11.29"
[Mon May 27 08:12:44 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 27 08:12:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src15.csv
[Mon May 27 08:12:44 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 27 08:12:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src15.csv
[Mon May 27 08:12:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:47 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 27 08:12:47 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 27 08:12:47 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon May 27 08:14:29 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 15.240106 pixels away
[Mon May 27 08:14:31 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:31 2013] Assessing source extent using major
[Mon May 27 08:14:31 2013] Source does appear to be extended
[Mon May 27 08:14:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:57 2013] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:57 2013] Initial guess for spatial extent in simple fitting = 11.29"
[Mon May 27 08:15:57 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939
[Mon May 27 08:15:57 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 11.29"
[Mon May 27 08:15:58 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src14.ximg exists
[Mon May 27 08:15:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src14.csv
[Mon May 27 08:15:58 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon May 27 08:15:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src14.csv
[Mon May 27 08:15:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:16:01 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon May 27 08:16:01 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon May 27 08:16:01 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon May 27 08:17:55 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 15.240106 pixels away
[Mon May 27 08:17:56 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:56 2013] Assessing source extent using major
[Mon May 27 08:17:56 2013] Source does appear to be extended
[Mon May 27 08:17:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 21:01:54 2013] Counts = 2966.698730, rescaling region sizes by 2.000000
[Mon May 27 21:01:54 2013] XMMSAS src. selection expression = ellipse(15430.162827, 31037.023743, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 27 21:01:54 2013] Writing source region out to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src41_src.reg
[Mon May 27 21:01:54 2013] Extracting stamp from image fullrun_mos2_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (103, 282) - (253, 432)
[Mon May 27 21:01:54 2013] XMMSAS bgd. selection expression = annulus(15430.162827, 31037.023743, 4350.000000, 8700.000000, X, Y) && !ellipse(25074.027400, 24654.902200, 1035.224030, 1035.224030, 0.000000, X, Y) && !ellipse(25008.150000, 24564.774000, 5096.688147, 5096.688147, 0.000000, X, Y) && !ellipse(23828.894000, 24074.806000, 1254.296036, 1254.296036, 0.000000, X, Y) && !ellipse(23581.374000, 23850.534000, 7525.776217, 7525.776217, 0.000000, X, Y) && !ellipse(19812.588200, 16817.666000, 10458.096301, 10458.096301, 0.000000, X, Y) && !ellipse(22911.640000, 23507.768000, 1254.296036, 1254.296036, 0.000000, X, Y) && !ellipse(20652.047000, 20401.702000, 2953.728085, 1046.064030, 109.511200, X, Y) && !ellipse(22123.402000, 19642.822000, 6700.080193, 6700.080193, 0.000000, X, Y) && !ellipse(24512.934892, 21400.647845, 8691.936250, 4387.870545, 136.033697, X, Y) && !ellipse(22542.752000, 19843.404000, 4345.968125, 4345.968125, 0.000000, X, Y) && !ellipse(23423.598000, 20501.022000, 8691.936250, 5599.488161, 135.932300, X, Y) && !ellipse(21588.359600, 22201.206000, 1410.192041, 1410.192041, 0.000000, X, Y) && !ellipse(23258.528000, 22058.086000, 2109.104061, 2109.104061, 5.829000, X, Y) && !ellipse(22471.892000, 23579.619600, 1318.856038, 1318.856038, 0.000000, X, Y) && !ellipse(21112.810000, 21290.158000, 2051.240059, 2051.240059, 0.000000, X, Y) && !ellipse(29569.180000, 24900.936000, 9758.736281, 9758.736281, 0.000000, X, Y) && !ellipse(16926.197495, 34206.871185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14047.764740, 30032.981934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24448.722534, 33088.588776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11933.160019, 33626.311859, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 21:01:54 2013] Writing fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src41.gif
[Mon May 27 21:46:38 2013] Mean detx,y = (-6945.92, -9982.30) 
[Mon May 27 21:46:41 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 21:48:59 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 21:49:00 2013] Setting source spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon May 27 21:49:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Tue May 28 10:32:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 10:32:25 2013] rmf not generated due to insufficient counts