[Mon May 27 08:09:17 2013] Detection parameters:
  Position = (266.7, 253.0) = 15 3 46.28 -41 44 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3836.5 +/- 88.2
  Background counts = 651.1
  Rate = 0.03 +/- 0.0008

[Mon May 27 08:09:42 2013] Off-axis axis estimate = 4.02'
[Mon May 27 08:12:43 2013] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:43 2013] Initial guess for spatial extent in simple fitting = 8.44"
[Mon May 27 08:12:43 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.840
[Mon May 27 08:12:43 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 8.44"
[Mon May 27 08:12:45 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src27.ximg exists
[Mon May 27 08:12:45 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon May 27 08:12:45 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src27 appears to have run properly
[Mon May 27 08:12:47 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon May 27 08:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon May 27 08:12:47 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon May 27 08:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon May 27 08:12:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:14:29 2013] Warning, spatial fit 27 centroid is now closest to src. 23
[Mon May 27 08:14:29 2013] Spatial fit model total counts = 15063.500000, observed total counts = 21984.000000
[Mon May 27 08:14:29 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:14:31 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:31 2013] Assessing source extent using major
[Mon May 27 08:14:31 2013] Source does appear to be extended
[Mon May 27 08:14:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:57 2013] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:57 2013] Initial guess for spatial extent in simple fitting = 8.44"
[Mon May 27 08:15:57 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.840
[Mon May 27 08:15:57 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 8.44"
[Mon May 27 08:15:59 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src25.ximg exists
[Mon May 27 08:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src25.csv
[Mon May 27 08:15:59 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon May 27 08:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src25.csv
[Mon May 27 08:15:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:16:01 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon May 27 08:16:01 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon May 27 08:16:01 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon May 27 08:17:55 2013] Spatial fit model total counts = 24693.000000, observed total counts = 24698.000000
[Mon May 27 08:17:55 2013] Offset between fit and detection position for source 24 = 0.479616 pixels
[Mon May 27 08:17:55 2013] 24162.919000 total counts/ 23688.400000 bgd. counts: snr = 3.083087
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.479616 pixels
  Position = (266.8, 252.5) = 15 3 46.26 -41 44 33.5
  Extent = 4.1 (3.3-4.9)", rotation angle = 0
  Source counts = 474.5 +/- 155.4
  Background counts = 23688.4
  Rate = 0.004 +/- 0.001
[Mon May 27 08:17:56 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:56 2013] Assessing source extent using major axis lower bound
[Mon May 27 08:17:56 2013] Source does appear to be extended
[Mon May 27 08:17:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:17:56 2013] Source is confused with source 27
[Mon May 27 08:17:56 2013] Source is confused with source 30
[Mon May 27 08:17:56 2013] Source is confused with source 28
[Mon May 27 21:01:57 2013] XMMSAS src. selection expression = ellipse(23159.808400, 21921.409000, 245.095207, 245.095207, 0.000000, X, Y)
[Mon May 27 21:01:57 2013] Writing source region out to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src24_src.reg
[Mon May 27 21:01:57 2013] Extracting stamp from image fullrun_mos2_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (253, 238) - (281, 267)
[Mon May 27 21:01:57 2013] XMMSAS bgd. selection expression = annulus(23159.808400, 21921.409000, 408.492012, 816.984024, X, Y) && !ellipse(25008.150000, 24564.774000, 5096.688147, 5096.688147, 0.000000, X, Y) && !ellipse(23581.374000, 23850.534000, 7525.776217, 7525.776217, 0.000000, X, Y) && !ellipse(19812.588200, 16817.666000, 10458.096301, 10458.096301, 0.000000, X, Y) && !ellipse(21664.762400, 18918.838000, 2889.136083, 958.064028, 308.622000, X, Y) && !ellipse(22911.640000, 23507.768000, 1254.296036, 1254.296036, 0.000000, X, Y) && !ellipse(20652.047000, 20401.702000, 2953.728085, 1046.064030, 109.511200, X, Y) && !ellipse(21882.762000, 19289.836000, 2090.568060, 821.744024, 135.734000, X, Y) && !ellipse(22123.402000, 19642.822000, 6700.080193, 6700.080193, 0.000000, X, Y) && !ellipse(24512.934892, 21400.647845, 8691.936250, 4387.870545, 136.033697, X, Y) && !ellipse(22542.752000, 19843.404000, 4345.968125, 4345.968125, 0.000000, X, Y) && !ellipse(21776.536600, 20704.068000, 1524.392044, 1524.392044, 0.000000, X, Y) && !ellipse(23423.598000, 20501.022000, 8691.936250, 5599.488161, 135.932300, X, Y) && !ellipse(21588.359600, 22201.206000, 1410.192041, 1410.192041, 0.000000, X, Y) && !ellipse(23258.528000, 22058.086000, 2109.104061, 2109.104061, 5.829000, X, Y) && !ellipse(22471.892000, 23579.619600, 1318.856038, 1318.856038, 0.000000, X, Y) && !ellipse(21112.810000, 21290.158000, 2051.240059, 2051.240059, 0.000000, X, Y) && !ellipse(29569.180000, 24900.936000, 9758.736281, 9758.736281, 0.000000, X, Y)
[Mon May 27 21:01:57 2013] Writing fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src24.gif
[Mon May 27 22:41:58 2013] Mean detx,y = (-2758.11, 1201.34) 
[Mon May 27 22:42:01 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 22:42:41 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 22:42:42 2013] Setting source spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon May 27 22:42:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src24_bgd.pi.gz