[Mon May 27 08:09:38 2013] Detection parameters:
  Position = (255.2, 147.1) = 15 3 50.77 -41 52 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 369.3 +/- 42.6
  Background counts = 583.0
  Rate = 0.003 +/- 0.0003

[Mon May 27 08:09:42 2013] Off-axis axis estimate = 11.41'
[Mon May 27 08:12:43 2013] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:43 2013] Initial guess for spatial extent in simple fitting = 12.13"
[Mon May 27 08:12:43 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.971
[Mon May 27 08:12:43 2013] Giving source the simple spatial ID 90 for pass 0, mean size = 12.13"
[Mon May 27 08:12:46 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src90.ximg exists
[Mon May 27 08:12:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src90.csv
[Mon May 27 08:12:46 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src90_1.ximg exists
[Mon May 27 08:12:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src90.csv
[Mon May 27 08:12:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:49 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Mon May 27 08:12:49 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Mon May 27 08:12:49 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Mon May 27 08:14:30 2013] Warning: source 90 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 180 at 11.357768 pixels away
[Mon May 27 08:14:31 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:31 2013] Assessing source extent using major
[Mon May 27 08:14:31 2013] Source does appear to be extended
[Mon May 27 08:14:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:31 2013] Source is confused with source 63
[Mon May 27 08:15:57 2013] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:57 2013] Initial guess for spatial extent in simple fitting = 12.13"
[Mon May 27 08:15:57 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.971
[Mon May 27 08:15:57 2013] Giving source the simple spatial ID 84 for pass 1, mean size = 12.13"
[Mon May 27 08:16:00 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src84.ximg exists
[Mon May 27 08:16:00 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src84_1.ximg exists
[Mon May 27 08:16:00 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src84 appears to have run properly
[Mon May 27 08:16:03 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Mon May 27 08:16:03 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Mon May 27 08:16:03 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src84 appears to have run properly
[Mon May 27 08:17:56 2013] Warning: source 84 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 180 at 11.537185 pixels away
[Mon May 27 08:17:56 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:56 2013] Assessing source extent using major
[Mon May 27 08:17:56 2013] Source does appear to be extended
[Mon May 27 08:17:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 21:02:10 2013] XMMSAS src. selection expression = ellipse(22158.078751, 12750.318298, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 21:02:10 2013] Writing source region out to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src180_src.reg
[Mon May 27 21:02:10 2013] Extracting stamp from image fullrun_mos2_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (218, 110) - (293, 185)
[Mon May 27 21:02:10 2013] XMMSAS bgd. selection expression = annulus(22158.078751, 12750.318298, 1087.500000, 2175.000000, X, Y) && !ellipse(19686.774000, 15875.572000, 1758.032051, 1758.032051, 0.000000, X, Y) && !ellipse(19812.588200, 16817.666000, 10458.096301, 10458.096301, 0.000000, X, Y) && !ellipse(18965.134000, 14154.470000, 5916.624170, 5916.624170, 0.000000, X, Y) && !ellipse(18387.056000, 13205.386000, 5922.048170, 5922.048170, 0.000000, X, Y) && !ellipse(22123.402000, 19642.822000, 6700.080193, 6700.080193, 0.000000, X, Y) && !ellipse(24512.934892, 21400.647845, 8691.936250, 4387.870545, 136.033697, X, Y) && !ellipse(23423.598000, 20501.022000, 8691.936250, 5599.488161, 135.932300, X, Y) && !ellipse(18193.375000, 12158.484000, 2012.576058, 2012.576058, 0.000000, X, Y) && !ellipse(21569.164000, 16467.352000, 1700.944049, 1700.944049, 0.000000, X, Y) && !ellipse(21160.818000, 13547.396000, 1346.128039, 1346.128039, 0.000000, X, Y) && !ellipse(21603.899796, 15250.601868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22385.536438, 15552.549057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21619.171524, 12740.222549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20565.685104, 11100.741959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22450.762543, 15091.027969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21079.381500, 11350.997055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24258.014435, 10014.211044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22923.461304, 15232.444122, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 21:02:10 2013] Writing fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src180.gif
[Tue May 28 00:42:10 2013] Mean detx,y = (-6852.10, 9480.57) 
[Tue May 28 00:42:13 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 00:42:48 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 00:42:50 2013] Setting source spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src180_src_b10.pi.gz
[Tue May 28 00:42:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src180_bgd.pi.gz
[Tue May 28 16:51:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 16:51:07 2013] rmf not generated due to insufficient counts