[Mon May 27 08:09:16 2013] Detection parameters:
  Position = (203.8, 111.0) = 15 4 10.81 -41 54 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1914.4 +/- 70.0
  Background counts = 531.2
  Rate = 0.02 +/- 0.0006

[Mon May 27 08:09:42 2013] Off-axis axis estimate = 15.22'
[Mon May 27 08:12:43 2013] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 08:12:43 2013] Initial guess for spatial extent in simple fitting = 14.04"
[Mon May 27 08:12:43 2013] source mask rpix=3.2, npix_max = 55, mask sum = 63, frac = 1.134
[Mon May 27 08:12:43 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 14.04"
[Mon May 27 08:12:45 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src49.ximg exists
[Mon May 27 08:12:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src49.csv
[Mon May 27 08:12:45 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon May 27 08:12:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src49.csv
[Mon May 27 08:12:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:47 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon May 27 08:12:47 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon May 27 08:12:47 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Mon May 27 08:14:30 2013] Warning, spatial fit 49 centroid is now closest to src. 64
[Mon May 27 08:14:31 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:31 2013] Assessing source extent using major
[Mon May 27 08:14:31 2013] Source does appear to be extended
[Mon May 27 08:14:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:57 2013] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:57 2013] Initial guess for spatial extent in simple fitting = 14.04"
[Mon May 27 08:15:57 2013] source mask rpix=3.2, npix_max = 55, mask sum = 63, frac = 1.134
[Mon May 27 08:15:57 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 14.04"
[Mon May 27 08:15:59 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src46.ximg exists
[Mon May 27 08:15:59 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src46_1.ximg exists
[Mon May 27 08:15:59 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src46 appears to have run properly
[Mon May 27 08:16:02 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Mon May 27 08:16:02 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Mon May 27 08:16:02 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Mon May 27 08:17:56 2013] Warning, spatial fit 46 centroid is now closest to src. 64
[Mon May 27 08:17:56 2013] Spatial fit model total counts = 12293.900000, observed total counts = 7929.000000
[Mon May 27 08:17:56 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:17:56 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:56 2013] Assessing source extent using major
[Mon May 27 08:17:56 2013] Source does appear to be extended
[Mon May 27 08:17:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:17:56 2013] Source is confused with source 17
[Mon May 27 21:02:05 2013] Counts = 1914.359497, rescaling region sizes by 2.000000
[Mon May 27 21:02:05 2013] XMMSAS src. selection expression = ellipse(17685.610214, 9608.841171, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 27 21:02:05 2013] Writing source region out to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src18_src.reg
[Mon May 27 21:02:05 2013] Extracting stamp from image fullrun_mos2_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (129, 36) - (279, 186)
[Mon May 27 21:02:06 2013] XMMSAS bgd. selection expression = annulus(17685.610214, 9608.841171, 4350.000000, 8700.000000, X, Y) && !ellipse(19954.004852, 18210.910416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23581.374000, 23850.534000, 7525.776217, 7525.776217, 0.000000, X, Y) && !ellipse(19034.786000, 16648.568000, 1253.096036, 1253.096036, 0.000000, X, Y) && !ellipse(19686.774000, 15875.572000, 1758.032051, 1758.032051, 0.000000, X, Y) && !ellipse(20648.954000, 17932.710000, 1444.568042, 1444.568042, 0.000000, X, Y) && !ellipse(20467.765000, 19588.778000, 1607.456046, 1607.456046, 0.000000, X, Y) && !ellipse(19812.588200, 16817.666000, 10458.096301, 10458.096301, 0.000000, X, Y) && !ellipse(21090.455627, 18396.206238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21664.762400, 18918.838000, 2889.136083, 958.064028, 308.622000, X, Y) && !ellipse(18970.003204, 15607.836060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18965.134000, 14154.470000, 5916.624170, 5916.624170, 0.000000, X, Y) && !ellipse(20652.047000, 20401.702000, 2953.728085, 1046.064030, 109.511200, X, Y) && !ellipse(18387.056000, 13205.386000, 5922.048170, 5922.048170, 0.000000, X, Y) && !ellipse(21882.762000, 19289.836000, 2090.568060, 821.744024, 135.734000, X, Y) && !ellipse(19344.451279, 17003.388489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22123.402000, 19642.822000, 6700.080193, 6700.080193, 0.000000, X, Y) && !ellipse(24512.934892, 21400.647845, 8691.936250, 4387.870545, 136.033697, X, Y) && !ellipse(22542.752000, 19843.404000, 4345.968125, 4345.968125, 0.000000, X, Y) && !ellipse(23423.598000, 20501.022000, 8691.936250, 5599.488161, 135.932300, X, Y) && !ellipse(18193.375000, 12158.484000, 2012.576058, 2012.576058, 0.000000, X, Y) && !ellipse(21569.164000, 16467.352000, 1700.944049, 1700.944049, 0.000000, X, Y) && !ellipse(17811.599200, 10306.152800, 1676.072048, 1676.072048, 0.000000, X, Y) && !ellipse(25903.150238, 12497.109482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29569.180000, 24900.936000, 9758.736281, 9758.736281, 0.000000, X, Y) && !ellipse(21160.818000, 13547.396000, 1346.128039, 1346.128039, 0.000000, X, Y) && !ellipse(21603.899796, 15250.601868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22385.536438, 15552.549057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21619.171524, 12740.222549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26718.880000, 8848.390000, 2204.488063, 1274.240037, 344.476800, X, Y) && !ellipse(20565.685104, 11100.741959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18655.939789, 8679.609459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27089.481049, 7617.472954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25342.139020, 18548.571200, 1512.736044, 1512.736044, 0.000000, X, Y) && !ellipse(22158.078751, 12750.318298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22450.762543, 15091.027969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27106.619263, 8316.957680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27095.850464, 9961.642128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25602.585240, 18960.162400, 999.256029, 999.256029, 0.000000, X, Y) && !ellipse(25713.416534, 7333.042320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24118.577606, 7380.656952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19196.814392, 8351.497620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21079.381500, 11350.997055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24258.014435, 10014.211044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26898.966766, 12480.884598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23060.126282, 8372.174324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24862.620361, 8212.818802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22923.461304, 15232.444122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23631.544342, 7849.567650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25104.336884, 7778.734123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24866.435638, 7300.856728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26357.531952, 7372.531898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23858.283844, 9610.227760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25804.107025, 7961.303230, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 21:02:06 2013] Writing fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src18.gif
[Mon May 27 23:49:18 2013] Mean detx,y = (-11745.83, 10790.06) 
[Mon May 27 23:49:20 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 23:50:31 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 23:50:31 2013] Setting source spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 27 23:50:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue May 28 15:53:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 15:53:47 2013] rmf not generated due to insufficient counts