[Mon May 27 08:09:34 2013] Detection parameters:
  Position = (324.6, 189.3) = 15 3 23.77 -41 48 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 503.0 +/- 214.8
  Background counts = 350.5
  Rate = 0.004 +/- 0.002

[Mon May 27 08:09:42 2013] Off-axis axis estimate = 8.14'
[Mon May 27 08:12:43 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:43 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Mon May 27 08:12:43 2013] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.648
[Mon May 27 08:12:43 2013] Giving source the simple spatial ID 74 for pass 0, mean size = 10.50"
[Mon May 27 08:12:46 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src74.ximg exists
[Mon May 27 08:12:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src74.csv
[Mon May 27 08:12:46 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src74_1.ximg exists
[Mon May 27 08:12:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src74.csv
[Mon May 27 08:12:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:48 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Mon May 27 08:12:48 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Mon May 27 08:12:48 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Mon May 27 08:14:30 2013] Warning, spatial fit 74 centroid is now closest to src. 140
[Mon May 27 08:14:31 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:31 2013] Assessing source extent using major
[Mon May 27 08:14:31 2013] Source does appear to be extended
[Mon May 27 08:14:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:57 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:57 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Mon May 27 08:15:57 2013] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.648
[Mon May 27 08:15:57 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 10.50"
[Mon May 27 08:16:00 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src70.ximg exists
[Mon May 27 08:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src70.csv
[Mon May 27 08:16:00 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src70_1.ximg exists
[Mon May 27 08:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src70.csv
[Mon May 27 08:16:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:16:02 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Mon May 27 08:16:02 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Mon May 27 08:16:02 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Mon May 27 08:17:56 2013] Source 150 is offset by 0.079666 and -7.103832 pixels which is larger than
2 X fitted extent = 2.561260 x 2.561260, not incorporating fit results
[Mon May 27 08:17:56 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:56 2013] Assessing source extent using major
[Mon May 27 08:17:56 2013] Source does appear to be extended
[Mon May 27 08:17:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 21:02:09 2013] XMMSAS src. selection expression = ellipse(28191.084564, 16419.908630, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 21:02:09 2013] Writing source region out to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src150_src.reg
[Mon May 27 21:02:09 2013] Extracting stamp from image fullrun_mos2_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (287, 152) - (362, 227)
[Mon May 27 21:02:09 2013] XMMSAS bgd. selection expression = annulus(28191.084564, 16419.908630, 1087.500000, 2175.000000, X, Y) && !ellipse(23581.374000, 23850.534000, 7525.776217, 7525.776217, 0.000000, X, Y) && !ellipse(19812.588200, 16817.666000, 10458.096301, 10458.096301, 0.000000, X, Y) && !ellipse(22123.402000, 19642.822000, 6700.080193, 6700.080193, 0.000000, X, Y) && !ellipse(24512.934892, 21400.647845, 8691.936250, 4387.870545, 136.033697, X, Y) && !ellipse(22542.752000, 19843.404000, 4345.968125, 4345.968125, 0.000000, X, Y) && !ellipse(23423.598000, 20501.022000, 8691.936250, 5599.488161, 135.932300, X, Y) && !ellipse(29569.180000, 24900.936000, 9758.736281, 9758.736281, 0.000000, X, Y) && !ellipse(28961.433350, 14293.364243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29685.080170, 16955.566101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29622.713531, 15530.027771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29175.760590, 15619.401367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25342.139020, 18548.571200, 1512.736044, 1512.736044, 0.000000, X, Y) && !ellipse(29204.971222, 16571.870560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25602.585240, 18960.162400, 999.256029, 999.256029, 0.000000, X, Y)
[Mon May 27 21:02:09 2013] Writing fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src150.gif
[Tue May 28 00:26:35 2013] Mean detx,y = (140.69, 8097.09) 
[Tue May 28 00:26:39 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 00:27:16 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 00:27:17 2013] Setting source spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src150_src_b10.pi.gz
[Tue May 28 00:27:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src150_bgd.pi.gz
[Tue May 28 16:32:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 16:32:53 2013] rmf not generated due to insufficient counts