[Mon May 27 08:09:30 2013] Detection parameters:
  Position = (327.7, 263.1) = 15 3 22.58 -41 43 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 278.0 +/- 45.0
  Background counts = 928.2
  Rate = 0.003 +/- 0.0004

[Mon May 27 08:09:42 2013] Off-axis axis estimate = 3.33'
[Mon May 27 08:12:43 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:43 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Mon May 27 08:12:43 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897
[Mon May 27 08:12:43 2013] Giving source the simple spatial ID 101 for pass 0, mean size = 8.09"
[Mon May 27 08:14:31 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:31 2013] Assessing source extent using major
[Mon May 27 08:14:31 2013] Source does appear to be extended
[Mon May 27 08:14:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:31 2013] Source is confused with source 54
[Mon May 27 08:15:57 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:57 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Mon May 27 08:15:57 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897
[Mon May 27 08:15:57 2013] Giving source the simple spatial ID 94 for pass 1, mean size = 8.09"
[Mon May 27 08:16:00 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src94.ximg exists
[Mon May 27 08:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src94.csv
[Mon May 27 08:16:00 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src94_1.ximg exists
[Mon May 27 08:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src94.csv
[Mon May 27 08:16:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:16:03 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src94.ximg exists
[Mon May 27 08:16:03 2013] fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src94_1.ximg exists
[Mon May 27 08:16:03 2013] Fit fullrun_mos2_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src94 appears to have run properly
[Mon May 27 08:17:56 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 123 at 10.780143 pixels away
[Mon May 27 08:17:56 2013] Warning, spatial fit 94 centroid is now closest to src. 54
[Mon May 27 08:17:56 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:56 2013] Assessing source extent using major
[Mon May 27 08:17:56 2013] Source does appear to be extended
[Mon May 27 08:17:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 21:02:11 2013] XMMSAS src. selection expression = ellipse(28461.369202, 22838.741974, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 21:02:11 2013] Writing source region out to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src123_src.reg
[Mon May 27 21:02:11 2013] Extracting stamp from image fullrun_mos2_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (290, 226) - (365, 301)
[Mon May 27 21:02:11 2013] XMMSAS bgd. selection expression = annulus(28461.369202, 22838.741974, 1087.500000, 2175.000000, X, Y) && !ellipse(25008.150000, 24564.774000, 5096.688147, 5096.688147, 0.000000, X, Y) && !ellipse(23581.374000, 23850.534000, 7525.776217, 7525.776217, 0.000000, X, Y) && !ellipse(19812.588200, 16817.666000, 10458.096301, 10458.096301, 0.000000, X, Y) && !ellipse(22123.402000, 19642.822000, 6700.080193, 6700.080193, 0.000000, X, Y) && !ellipse(24512.934892, 21400.647845, 8691.936250, 4387.870545, 136.033697, X, Y) && !ellipse(22542.752000, 19843.404000, 4345.968125, 4345.968125, 0.000000, X, Y) && !ellipse(23423.598000, 20501.022000, 8691.936250, 5599.488161, 135.932300, X, Y) && !ellipse(29888.964000, 25502.986000, 1831.496053, 1831.496053, 0.000000, X, Y) && !ellipse(30402.407200, 25767.526400, 1302.096037, 640.484818, 342.568000, X, Y) && !ellipse(29265.225980, 25089.947800, 853.336025, 853.336025, 0.000000, X, Y) && !ellipse(29569.180000, 24900.936000, 9758.736281, 9758.736281, 0.000000, X, Y) && !ellipse(26939.144000, 23138.604000, 1225.304035, 1225.304035, 0.000000, X, Y) && !ellipse(28617.419000, 25332.543400, 1215.072035, 1215.072035, 0.000000, X, Y) && !ellipse(25760.676056, 22161.595337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.848145, 23260.166809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27840.098000, 23449.490000, 1012.664029, 1012.664029, 0.000000, X, Y) && !ellipse(27354.843262, 25684.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32827.046000, 26595.072000, 3088.144089, 3088.144089, 0.000000, X, Y) && !ellipse(30882.968000, 24506.225400, 1402.224040, 1402.224040, 0.000000, X, Y) && !ellipse(28651.734802, 23968.818024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27539.293457, 20118.631271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.150000, 24352.048000, 2400.368069, 2400.368069, 0.000000, X, Y) && !ellipse(26552.050018, 21024.401154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.045331, 20512.631545, 1357.392039, 1290.993114, 238.937197, X, Y)
[Mon May 27 21:02:11 2013] Writing fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src123.gif
[Tue May 28 01:04:52 2013] Mean detx,y = (2516.15, 2092.45) 
[Tue May 28 01:04:57 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 01:05:42 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 01:05:43 2013] Setting source spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src123_src_b10.pi.gz
[Tue May 28 01:05:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630301_pi300-10000_pass1_cl_src123_bgd.pi.gz
[Tue May 28 17:06:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 17:06:10 2013] rmf not generated due to insufficient counts