[Mon May 27 08:08:57 2013] Detection parameters:
  Position = (395.1, 298.9) = 15 2 56.43 -41 41 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 393.6 +/- 34.0
  Background counts = 252.6
  Rate = 0.006 +/- 0.0005

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 7.01'
[Mon May 27 08:12:37 2013] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 9.93"
[Mon May 27 08:12:37 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.162
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 9.93"
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src62.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src62.csv
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src62_1.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src62.csv
[Mon May 27 08:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Mon May 27 08:12:41 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Mon May 27 08:14:02 2013] Spatial fit model total counts = 3520.070000, observed total counts = 3514.000000
[Mon May 27 08:14:02 2013] Offset between fit and detection position for source 98 = 3.591388 pixels
[Mon May 27 08:14:02 2013] 3193.019000 total counts/ 2201.670000 bgd. counts: snr = 21.127614
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 3.591388 pixels
  Position = (398.4, 297.6) = 15 2 55.12 -41 41 16.9
  Extent = 19.9 (19.8-39.7)", rotation angle = 0
  Source counts = 991.3 +/- 56.5
  Background counts = 2201.7
  Rate = 0.009 +/- 0.0005
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major axis lower bound
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:02 2013] Source is confused with source 99
[Mon May 27 08:14:02 2013] Source is confused with source 93
[Mon May 27 08:15:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 19.86"
[Mon May 27 08:15:49 2013] source mask rpix=4.6, npix_max = 102, mask sum = 100, frac = 0.974
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 19.86"
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src61.ximg exists
[Mon May 27 08:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src61.csv
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src61_1.ximg exists
[Mon May 27 08:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src61.csv
[Mon May 27 08:15:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Mon May 27 08:15:56 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Mon May 27 08:17:20 2013] Warning, spatial fit 61 centroid is now closest to src. 93
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:56 2013] XMMSAS src. selection expression = ellipse(34614.996000, 25845.178000, 1191.756034, 1191.756034, 0.000000, X, Y)
[Mon May 27 08:43:56 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src98_src.reg
[Mon May 27 08:43:56 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (330, 229) - (467, 366)
[Mon May 27 08:43:56 2013] XMMSAS bgd. selection expression = annulus(34614.996000, 25845.178000, 1986.260057, 3972.520114, X, Y) && !ellipse(31059.576000, 26034.458000, 7868.592226, 7868.592226, 0.000000, X, Y) && !ellipse(29939.678000, 24363.380000, 1677.712048, 1677.712048, 0.000000, X, Y) && !ellipse(29343.568680, 25412.804000, 7413.840213, 7413.840213, 0.000000, X, Y) && !ellipse(32178.219055, 26211.521271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30978.032000, 24630.014000, 1414.096041, 1414.096041, 0.000000, X, Y) && !ellipse(33080.384000, 26144.014000, 1536.352044, 1536.352044, 0.000000, X, Y) && !ellipse(30302.021362, 23778.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31860.892609, 26697.157990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40040.146000, 22975.384000, 2036.792059, 2036.792059, 0.000000, X, Y) && !ellipse(31376.591370, 25172.058716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40287.224000, 22818.152000, 4073.584117, 1545.536044, 32.870000, X, Y) && !ellipse(31627.567980, 23004.667800, 813.608023, 813.608023, 0.000000, X, Y) && !ellipse(32685.232000, 24478.740120, 1525.696044, 1525.696044, 0.000000, X, Y) && !ellipse(38260.414000, 24278.100000, 1831.896053, 1831.896053, 0.000000, X, Y) && !ellipse(32560.999939, 21662.521515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34303.437256, 24943.158020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36863.496155, 24737.815399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33637.802000, 24239.700000, 1525.696044, 1525.696044, 0.000000, X, Y) && !ellipse(40512.154600, 22518.282200, 2126.824061, 2126.824061, 0.000000, X, Y) && !ellipse(35528.953644, 24823.150696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30716.590000, 23330.594000, 1353.856039, 1353.856039, 0.000000, X, Y) && !ellipse(36247.802826, 24664.385254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38132.350586, 23710.706696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35428.718323, 25524.420929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36854.275238, 29971.592346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35987.025848, 25180.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38753.383179, 23448.137573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35791.735168, 24403.786163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39152.760651, 23865.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35328.432556, 23474.568390, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:56 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src98.gif
[Mon May 27 11:41:30 2013] Mean detx,y = (1732.72, -9340.11) 
[Mon May 27 11:41:32 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 11:41:50 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 11:41:50 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Mon May 27 11:41:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src98_bgd.pi.gz