[Mon May 27 08:08:56 2013] Detection parameters:
  Position = (333.6, 302.9) = 15 3 20.31 -41 40 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 496.0 +/- 38.3
  Background counts = 407.7
  Rate = 0.005 +/- 0.0004

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 2.57'
[Mon May 27 08:12:37 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 7.71"
[Mon May 27 08:12:37 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 69 for pass 0, mean size = 7.71"
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src69.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src69.csv
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src69_1.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src69.csv
[Mon May 27 08:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Mon May 27 08:12:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src69.csv
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Mon May 27 08:12:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src69.csv
[Mon May 27 08:12:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:14:02 2013] Warning, spatial fit 69 centroid is now closest to src. 45
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:02 2013] Source is confused with source 45
[Mon May 27 08:15:49 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 7.71"
[Mon May 27 08:15:49 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 67 for pass 1, mean size = 7.71"
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src67.ximg exists
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src67_1.ximg exists
[Mon May 27 08:15:53 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src67 appears to have run properly
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Mon May 27 08:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src67.csv
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Mon May 27 08:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src67.csv
[Mon May 27 08:15:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:17:20 2013] Spatial fit model total counts = 5963.310000, observed total counts = 5495.000000
[Mon May 27 08:17:20 2013] Offset between fit and detection position for source 92 = 1.034267 pixels
[Mon May 27 08:17:20 2013] 1687.167000 total counts/ 991.657000 bgd. counts: snr = 22.086283
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 1.034267 pixels
  Position = (332.5, 302.9) = 15 3 20.71 -41 40 54.4
  Extent = 17.4" x 17.4", rotation angle = 0
  Source counts = 695.5 +/- 41.1
  Background counts = 991.7
  Rate = 0.006 +/- 0.0004
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:57 2013] XMMSAS src. selection expression = ellipse(28881.722000, 26301.579000, 1047.000030, 1047.000030, 0.000000, X, Y)
[Mon May 27 08:43:57 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src92_src.reg
[Mon May 27 08:43:57 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (272, 243) - (393, 363)
[Mon May 27 08:43:57 2013] XMMSAS bgd. selection expression = annulus(28881.722000, 26301.579000, 1745.000050, 3490.000100, X, Y) && !ellipse(25377.639400, 24747.039228, 3374.760097, 3374.760097, 0.000000, X, Y) && !ellipse(21639.982000, 19075.266000, 4632.672133, 4632.672133, 0.000000, X, Y) && !ellipse(31059.576000, 26034.458000, 7868.592226, 7868.592226, 0.000000, X, Y) && !ellipse(21876.498000, 22104.292000, 8479.056244, 8479.056244, 0.000000, X, Y) && !ellipse(25133.945600, 22509.906000, 1239.896036, 1239.896036, 0.000000, X, Y) && !ellipse(29077.902000, 25225.335800, 1269.936037, 1269.936037, 0.000000, X, Y) && !ellipse(27019.830000, 23275.869220, 1218.784035, 1218.784035, 0.000000, X, Y) && !ellipse(29939.678000, 24363.380000, 1677.712048, 1677.712048, 0.000000, X, Y) && !ellipse(29343.568680, 25412.804000, 7413.840213, 7413.840213, 0.000000, X, Y) && !ellipse(32178.219055, 26211.521271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.441406, 23878.775360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.093600, 23459.764600, 1222.352035, 1222.352035, 0.000000, X, Y) && !ellipse(26792.494781, 22299.638275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28601.826000, 22707.672000, 1043.984030, 1043.984030, 0.000000, X, Y) && !ellipse(30978.032000, 24630.014000, 1414.096041, 1414.096041, 0.000000, X, Y) && !ellipse(28048.366119, 25775.031799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28914.545532, 23304.635895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33080.384000, 26144.014000, 1536.352044, 1536.352044, 0.000000, X, Y) && !ellipse(30302.021362, 23778.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31860.892609, 26697.157990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31376.591370, 25172.058716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31627.567980, 23004.667800, 813.608023, 813.608023, 0.000000, X, Y) && !ellipse(32685.232000, 24478.740120, 1525.696044, 1525.696044, 0.000000, X, Y) && !ellipse(33637.802000, 24239.700000, 1525.696044, 1525.696044, 0.000000, X, Y) && !ellipse(30716.590000, 23330.594000, 1353.856039, 1353.856039, 0.000000, X, Y)
[Mon May 27 08:43:57 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src92.gif
[Mon May 27 11:50:00 2013] Mean detx,y = (-348.69, -4170.96) 
[Mon May 27 11:50:03 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 11:50:36 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 11:50:36 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Mon May 27 11:50:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src92_bgd.pi.gz