[Mon May 27 08:08:51 2013] Detection parameters:
  Position = (476.5, 256.9) = 15 2 24.76 -41 44 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 643.8 +/- 40.7
  Background counts = 217.4
  Rate = 0.005 +/- 0.0003

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 13.25'
[Mon May 27 08:12:37 2013] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 13.06"
[Mon May 27 08:12:37 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 13.06"
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src67.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src67.csv
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src67_1.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src67.csv
[Mon May 27 08:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Mon May 27 08:12:41 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Mon May 27 08:14:02 2013] Warning, spatial fit 67 centroid is now closest to src. 60
[Mon May 27 08:14:02 2013] Spatial fit model total counts = -648.452000, observed total counts = 3692.000000
[Mon May 27 08:14:02 2013] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:02 2013] Source is confused with source 57
[Mon May 27 08:14:02 2013] Source is confused with source 56
[Mon May 27 08:14:02 2013] Source is confused with source 23
[Mon May 27 08:15:49 2013] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 13.06"
[Mon May 27 08:15:49 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 13.06"
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src65.ximg exists
[Mon May 27 08:15:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src65.csv
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src65_1.ximg exists
[Mon May 27 08:15:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src65.csv
[Mon May 27 08:15:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Mon May 27 08:15:56 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Mon May 27 08:17:20 2013] Warning, spatial fit 65 centroid is now closest to src. 23
[Mon May 27 08:17:21 2013] Source 59 is offset by -2.814163 and -5.347763 pixels which is larger than
2 X fitted extent = 1.473554 x 1.473554, not incorporating fit results
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:57 2013] XMMSAS src. selection expression = ellipse(41404.761810, 22305.338623, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 08:43:57 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src59_src.reg
[Mon May 27 08:43:57 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (439, 219) - (514, 294)
[Mon May 27 08:43:57 2013] XMMSAS bgd. selection expression = annulus(41404.761810, 22305.338623, 1087.500000, 2175.000000, X, Y) && !ellipse(40040.146000, 22975.384000, 2036.792059, 2036.792059, 0.000000, X, Y) && !ellipse(40287.224000, 22818.152000, 4073.584117, 1545.536044, 32.870000, X, Y) && !ellipse(41883.330841, 21864.190903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38260.414000, 24278.100000, 1831.896053, 1831.896053, 0.000000, X, Y) && !ellipse(40512.154600, 22518.282200, 2126.824061, 2126.824061, 0.000000, X, Y) && !ellipse(41508.472565, 21352.491089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39894.233337, 21815.217560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38753.383179, 23448.137573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39152.760651, 23865.035583, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:57 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src59.gif
[Mon May 27 11:44:29 2013] Mean detx,y = (7306.67, -14607.24) 
[Mon May 27 11:44:33 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 11:44:47 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 11:44:48 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Mon May 27 11:44:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Mon May 27 19:49:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 19:49:39 2013] rmf not generated due to insufficient counts