[Mon May 27 08:08:50 2013] Detection parameters:
  Position = (332.9, 268.4) = 15 3 20.56 -41 43 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 822.6 +/- 59.7
  Background counts = 824.8
  Rate = 0.01 +/- 0.0007

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 3.31'
[Mon May 27 08:12:37 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Mon May 27 08:12:37 2013] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.764
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 8.09"
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src55.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src55.csv
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src55.csv
[Mon May 27 08:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon May 27 08:12:41 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Mon May 27 08:14:02 2013] Source 53 is offset by 4.217558 and -8.007955 pixels which is larger than
2 X fitted extent = 6.122253 x 6.122253, not incorporating fit results
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:02 2013] Source is confused with source 55
[Mon May 27 08:15:49 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Mon May 27 08:15:49 2013] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.764
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 8.09"
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src54.ximg exists
[Mon May 27 08:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src54.csv
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon May 27 08:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src54.csv
[Mon May 27 08:15:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:55 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon May 27 08:15:55 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon May 27 08:15:55 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Mon May 27 08:17:20 2013] Warning, spatial fit 54 centroid is now closest to src. 55
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:54 2013] XMMSAS src. selection expression = ellipse(28914.545532, 23304.635895, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 08:43:54 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src53_src.reg
[Mon May 27 08:43:54 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (295, 231) - (370, 306)
[Mon May 27 08:43:54 2013] XMMSAS bgd. selection expression = annulus(28914.545532, 23304.635895, 1087.500000, 2175.000000, X, Y) && !ellipse(25377.639400, 24747.039228, 3374.760097, 3374.760097, 0.000000, X, Y) && !ellipse(27249.469000, 19947.850000, 1426.904041, 1426.904041, 0.000000, X, Y) && !ellipse(31059.576000, 26034.458000, 7868.592226, 7868.592226, 0.000000, X, Y) && !ellipse(21876.498000, 22104.292000, 8479.056244, 8479.056244, 0.000000, X, Y) && !ellipse(29077.902000, 25225.335800, 1269.936037, 1269.936037, 0.000000, X, Y) && !ellipse(27019.830000, 23275.869220, 1218.784035, 1218.784035, 0.000000, X, Y) && !ellipse(29939.678000, 24363.380000, 1677.712048, 1677.712048, 0.000000, X, Y) && !ellipse(29343.568680, 25412.804000, 7413.840213, 7413.840213, 0.000000, X, Y) && !ellipse(26918.441406, 23878.775360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.093600, 23459.764600, 1222.352035, 1222.352035, 0.000000, X, Y) && !ellipse(26792.494781, 22299.638275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28601.826000, 22707.672000, 1043.984030, 1043.984030, 0.000000, X, Y) && !ellipse(30978.032000, 24630.014000, 1414.096041, 1414.096041, 0.000000, X, Y) && !ellipse(28048.366119, 25775.031799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30302.021362, 23778.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28881.722000, 26301.579000, 1396.000040, 1396.000040, 0.000000, X, Y) && !ellipse(31376.591370, 25172.058716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31627.567980, 23004.667800, 813.608023, 813.608023, 0.000000, X, Y) && !ellipse(26569.343640, 20912.783200, 529.375215, 529.375215, 0.000000, X, Y) && !ellipse(30716.590000, 23330.594000, 1353.856039, 1353.856039, 0.000000, X, Y)
[Mon May 27 08:43:54 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src53.gif
[Mon May 27 11:29:51 2013] Mean detx,y = (2051.54, -3267.04) 
[Mon May 27 11:29:54 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 11:30:23 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 11:30:24 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon May 27 11:30:24 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Mon May 27 19:33:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 19:33:56 2013] rmf not generated due to insufficient counts