[Mon May 27 08:08:50 2013] Detection parameters:
  Position = (373.6, 282.2) = 15 3 4.76 -41 42 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 498.4 +/- 63.0
  Background counts = 402.2
  Rate = 0.004 +/- 0.0005

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 5.57'
[Mon May 27 08:12:37 2013] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 9.22"
[Mon May 27 08:12:37 2013] source mask rpix=2.1, npix_max = 27, mask sum = 5, frac = 0.182
[Mon May 27 08:12:37 2013] Skipping simple spatial due to low active detector fraction
[Mon May 27 08:14:02 2013] Source 48 is offset by 1.221153 and 7.830528 pixels which is larger than
2 X fitted extent = 1.045025 x 1.045025, not incorporating fit results
[Mon May 27 08:14:02 2013] Spatial fit model total counts = 4458.520000, observed total counts = 4168.000000
[Mon May 27 08:14:02 2013] Offset between fit and detection position for source 48 = 2.681901 pixels
[Mon May 27 08:14:02 2013] Warning, changing simple spatial fit ID from -1 to 94
[Mon May 27 08:14:02 2013] 4462.546000 total counts/ 3719.800000 bgd. counts: snr = 12.178128
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 2.681901 pixels
  Position = (376.2, 281.9) = 15 3 3.72 -41 42 25.4
  Extent = 19.1 (19.0-38.1)", rotation angle = 0
  Source counts = 742.7 +/- 66.8
  Background counts = 3719.8
  Rate = 0.007 +/- 0.0006
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major axis lower bound
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:02 2013] Source is confused with source 103
[Mon May 27 08:15:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 19.07"
[Mon May 27 08:15:49 2013] source mask rpix=4.4, npix_max = 95, mask sum = 57, frac = 0.597
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 79 for pass 1, mean size = 19.07"
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src79.ximg exists
[Mon May 27 08:15:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src79.csv
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src79_1.ximg exists
[Mon May 27 08:15:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src79.csv
[Mon May 27 08:15:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Mon May 27 08:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src79.csv
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Mon May 27 08:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src79.csv
[Mon May 27 08:15:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:17:21 2013] Warning, spatial fit 79 centroid is now closest to src. 13
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:58 2013] XMMSAS src. selection expression = ellipse(32685.232000, 24478.740120, 1144.272033, 1144.272033, 0.000000, X, Y)
[Mon May 27 08:43:58 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src48_src.reg
[Mon May 27 08:43:58 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (310, 216) - (442, 348)
[Mon May 27 08:43:58 2013] XMMSAS bgd. selection expression = annulus(32685.232000, 24478.740120, 1907.120055, 3814.240110, X, Y) && !ellipse(31059.576000, 26034.458000, 7868.592226, 7868.592226, 0.000000, X, Y) && !ellipse(21876.498000, 22104.292000, 8479.056244, 8479.056244, 0.000000, X, Y) && !ellipse(29077.902000, 25225.335800, 1269.936037, 1269.936037, 0.000000, X, Y) && !ellipse(29939.678000, 24363.380000, 1677.712048, 1677.712048, 0.000000, X, Y) && !ellipse(29343.568680, 25412.804000, 7413.840213, 7413.840213, 0.000000, X, Y) && !ellipse(32178.219055, 26211.521271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28601.826000, 22707.672000, 1043.984030, 1043.984030, 0.000000, X, Y) && !ellipse(30978.032000, 24630.014000, 1414.096041, 1414.096041, 0.000000, X, Y) && !ellipse(28048.366119, 25775.031799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28914.545532, 23304.635895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33080.384000, 26144.014000, 1536.352044, 1536.352044, 0.000000, X, Y) && !ellipse(30302.021362, 23778.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31860.892609, 26697.157990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34614.996000, 25845.178000, 1589.008046, 1589.008046, 0.000000, X, Y) && !ellipse(28881.722000, 26301.579000, 1396.000040, 1396.000040, 0.000000, X, Y) && !ellipse(31376.591370, 25172.058716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40287.224000, 22818.152000, 4073.584117, 1545.536044, 32.870000, X, Y) && !ellipse(31627.567980, 23004.667800, 813.608023, 813.608023, 0.000000, X, Y) && !ellipse(38260.414000, 24278.100000, 1831.896053, 1831.896053, 0.000000, X, Y) && !ellipse(32560.999939, 21662.521515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34303.437256, 24943.158020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36863.496155, 24737.815399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33637.802000, 24239.700000, 1525.696044, 1525.696044, 0.000000, X, Y) && !ellipse(35528.953644, 24823.150696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30716.590000, 23330.594000, 1353.856039, 1353.856039, 0.000000, X, Y) && !ellipse(36247.802826, 24664.385254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35428.718323, 25524.420929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35987.025848, 25180.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35791.735168, 24403.786163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35328.432556, 23474.568390, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:58 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src48.gif
[Mon May 27 12:07:18 2013] Mean detx,y = (2212.97, -7287.17) 
[Mon May 27 12:07:21 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 12:07:54 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 12:07:55 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon May 27 12:07:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src48_bgd.pi.gz