[Mon May 27 08:08:49 2013] Detection parameters:
  Position = (178.0, 357.0) = 15 4 20.68 -41 36 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2369.1 +/- 56.5
  Background counts = 160.6
  Rate = 0.02 +/- 0.0005

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 9.71'
[Mon May 27 08:12:37 2013] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 11.28"
[Mon May 27 08:12:37 2013] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.836
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 11.28"
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src38.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src38.csv
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src38_1.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src38.csv
[Mon May 27 08:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Mon May 27 08:12:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src38.csv
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Mon May 27 08:12:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src38.csv
[Mon May 27 08:12:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:14:01 2013] Spatial fit model total counts = 3554.470000, observed total counts = 2635.000000
[Mon May 27 08:14:01 2013] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:49 2013] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 11.28"
[Mon May 27 08:15:49 2013] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.836
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 11.28"
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src37.ximg exists
[Mon May 27 08:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src37.csv
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon May 27 08:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src37.csv
[Mon May 27 08:15:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:55 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon May 27 08:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon May 27 08:15:55 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon May 27 08:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon May 27 08:15:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:17:20 2013] Spatial fit model total counts = 3553.920000, observed total counts = 2635.000000
[Mon May 27 08:17:20 2013] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:50 2013] Counts = 2369.084961, rescaling region sizes by 2.000000
[Mon May 27 08:43:50 2013] XMMSAS src. selection expression = ellipse(15434.738770, 31012.926697, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 27 08:43:50 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src40_src.reg
[Mon May 27 08:43:50 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (103, 282) - (253, 432)
[Mon May 27 08:43:50 2013] XMMSAS bgd. selection expression = annulus(15434.738770, 31012.926697, 4350.000000, 8700.000000, X, Y) && !ellipse(25377.639400, 24747.039228, 3374.760097, 3374.760097, 0.000000, X, Y) && !ellipse(23503.028000, 23846.182000, 1204.664035, 1204.664035, 0.000000, X, Y) && !ellipse(23085.437868, 23770.838440, 1711.704049, 765.070428, 354.031060, X, Y) && !ellipse(22460.996000, 22557.710000, 1315.288038, 1315.288038, 0.000000, X, Y) && !ellipse(21639.982000, 19075.266000, 4632.672133, 4632.672133, 0.000000, X, Y) && !ellipse(20373.312000, 19595.724400, 4714.824136, 4714.824136, 0.000000, X, Y) && !ellipse(24363.902000, 21416.246600, 1363.024039, 1363.024039, 0.000000, X, Y) && !ellipse(23172.040120, 21880.075000, 750.392822, 750.392822, 0.000000, X, Y) && !ellipse(24482.656464, 22244.257019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20998.124000, 21230.609000, 1447.024042, 1447.024042, 0.000000, X, Y) && !ellipse(31059.576000, 26034.458000, 7868.592226, 7868.592226, 0.000000, X, Y) && !ellipse(21688.158000, 21271.998000, 1413.176041, 1413.176041, 0.000000, X, Y) && !ellipse(21876.498000, 22104.292000, 8479.056244, 8479.056244, 0.000000, X, Y) && !ellipse(25133.945600, 22509.906000, 1239.896036, 1239.896036, 0.000000, X, Y) && !ellipse(21706.183600, 22991.203200, 890.056026, 890.056026, 0.000000, X, Y) && !ellipse(29343.568680, 25412.804000, 7413.840213, 7413.840213, 0.000000, X, Y) && !ellipse(14067.893200, 30005.269800, 436.086413, 436.086413, 0.000000, X, Y) && !ellipse(23021.808899, 25374.350708, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:50 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src40.gif
[Mon May 27 10:55:08 2013] Mean detx,y = (-9781.72, 6970.90) 
[Mon May 27 10:55:11 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 10:56:43 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 10:56:44 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon May 27 10:56:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon May 27 18:10:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 18:10:16 2013] rmf not generated due to insufficient counts