[Mon May 27 08:08:48 2013] Detection parameters:
  Position = (204.9, 120.9) = 15 4 10.37 -41 54 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1975.1 +/- 68.7
  Background counts = 549.6
  Rate = 0.02 +/- 0.0006

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 14.55'
[Mon May 27 08:12:37 2013] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 13.70"
[Mon May 27 08:12:37 2013] source mask rpix=3.1, npix_max = 53, mask sum = 58, frac = 1.089
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 13.70"
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src45.ximg exists
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src45_1.ximg exists
[Mon May 27 08:12:39 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src45 appears to have run properly
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Mon May 27 08:12:41 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Mon May 27 08:14:01 2013] Warning, spatial fit 45 centroid is now closest to src. 71
[Mon May 27 08:14:01 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 15.758550 pixels away
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:49 2013] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 13.70"
[Mon May 27 08:15:49 2013] source mask rpix=3.1, npix_max = 53, mask sum = 58, frac = 1.089
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 13.70"
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src44.ximg exists
[Mon May 27 08:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src44.csv
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src44_1.ximg exists
[Mon May 27 08:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src44.csv
[Mon May 27 08:15:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:55 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Mon May 27 08:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src44.csv
[Mon May 27 08:15:55 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Mon May 27 08:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src44.csv
[Mon May 27 08:15:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:17:20 2013] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 17.923919 pixels away
[Mon May 27 08:17:20 2013] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 11.037767 pixels away
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:52 2013] Counts = 1975.089844, rescaling region sizes by 2.000000
[Mon May 27 08:43:52 2013] XMMSAS src. selection expression = ellipse(17781.990433, 10471.731003, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 27 08:43:52 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src38_src.reg
[Mon May 27 08:43:52 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (130, 46) - (280, 196)
[Mon May 27 08:43:53 2013] XMMSAS bgd. selection expression = annulus(17781.990433, 10471.731003, 4350.000000, 8700.000000, X, Y) && !ellipse(18754.430000, 13915.860000, 5749.872165, 5749.872165, 0.000000, X, Y) && !ellipse(27249.469000, 19947.850000, 1426.904041, 1426.904041, 0.000000, X, Y) && !ellipse(19294.602000, 14947.334000, 1664.560048, 1664.560048, 0.000000, X, Y) && !ellipse(18722.698000, 13618.604000, 1617.800047, 1617.800047, 0.000000, X, Y) && !ellipse(19393.284000, 15189.216000, 1448.328042, 1448.328042, 0.000000, X, Y) && !ellipse(19934.871384, 18132.292343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20300.073318, 17344.111053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18988.194061, 16324.907261, 1315.288038, 495.193311, 100.620329, X, Y) && !ellipse(21639.982000, 19075.266000, 4632.672133, 4632.672133, 0.000000, X, Y) && !ellipse(20373.312000, 19595.724400, 4714.824136, 4714.824136, 0.000000, X, Y) && !ellipse(21500.872000, 20189.271400, 1518.880044, 1518.880044, 0.000000, X, Y) && !ellipse(20773.583191, 18756.052979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18176.614000, 12508.770000, 1790.616052, 1790.616052, 0.000000, X, Y) && !ellipse(23203.658000, 20462.764000, 1415.760041, 1415.760041, 0.000000, X, Y) && !ellipse(31059.576000, 26034.458000, 7868.592226, 7868.592226, 0.000000, X, Y) && !ellipse(20996.253860, 17753.817917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21876.498000, 22104.292000, 8479.056244, 8479.056244, 0.000000, X, Y) && !ellipse(21462.441162, 16833.947174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25892.094696, 12493.758835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21625.830000, 17968.869220, 1218.784035, 1218.784035, 0.000000, X, Y) && !ellipse(21932.662781, 15369.190079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29343.568680, 25412.804000, 7413.840213, 7413.840213, 0.000000, X, Y) && !ellipse(17633.911484, 9611.368095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22649.518036, 18428.182083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22153.968765, 14937.565948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20912.664246, 13867.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21517.788000, 13003.968800, 1293.656037, 1293.656037, 359.752000, X, Y) && !ellipse(21896.172058, 12664.284729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24338.233490, 15578.160797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18533.103531, 8993.531494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20452.219772, 11887.295715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27243.026703, 15201.288681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27100.791473, 8829.861549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27231.607422, 8216.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23236.698000, 15017.218000, 1754.656050, 1754.656050, 0.000000, X, Y) && !ellipse(27168.420380, 7447.426292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15055.883347, 19078.142548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20543.502800, 11000.468200, 1132.608033, 1132.608033, 0.000000, X, Y) && !ellipse(27065.588440, 10108.546227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.791962, 14687.447586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.938873, 18566.856918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25651.673828, 18994.728165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25747.180542, 7309.183563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25093.034424, 8126.277458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26198.777130, 7933.021194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.000000, 9530.002068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24325.653961, 10006.594429, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:53 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src38.gif
[Mon May 27 11:14:19 2013] Mean detx,y = (10329.73, 11378.55) 
[Mon May 27 11:14:24 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 11:16:05 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 11:16:06 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon May 27 11:16:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon May 27 18:51:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 18:51:57 2013] rmf not generated due to insufficient counts