[Mon May 27 08:08:48 2013] Detection parameters:
  Position = (298.2, 144.2) = 15 3 34.05 -41 52 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2553.5 +/- 67.5
  Background counts = 412.5
  Rate = 0.02 +/- 0.0005

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 11.18'
[Mon May 27 08:12:37 2013] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 12.02"
[Mon May 27 08:12:37 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.845
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 12.02"
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src36.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src36.csv
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src36_1.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src36.csv
[Mon May 27 08:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Mon May 27 08:12:41 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Mon May 27 08:14:01 2013] Warning, spatial fit 36 centroid is now closest to src. 183
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:49 2013] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 12.02"
[Mon May 27 08:15:49 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.845
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 12.02"
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src35.ximg exists
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src35_1.ximg exists
[Mon May 27 08:15:52 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src35 appears to have run properly
[Mon May 27 08:15:55 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Mon May 27 08:15:55 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Mon May 27 08:15:55 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Mon May 27 08:17:20 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 14.924398 pixels away
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:50 2013] Counts = 2553.517334, rescaling region sizes by 2.000000
[Mon May 27 08:43:50 2013] XMMSAS src. selection expression = ellipse(25892.094696, 12493.758835, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 27 08:43:50 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src37_src.reg
[Mon May 27 08:43:50 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (223, 69) - (373, 219)
[Mon May 27 08:43:50 2013] XMMSAS bgd. selection expression = annulus(25892.094696, 12493.758835, 4350.000000, 8700.000000, X, Y) && !ellipse(18754.430000, 13915.860000, 5749.872165, 5749.872165, 0.000000, X, Y) && !ellipse(27249.469000, 19947.850000, 1426.904041, 1426.904041, 0.000000, X, Y) && !ellipse(19294.602000, 14947.334000, 1664.560048, 1664.560048, 0.000000, X, Y) && !ellipse(18722.698000, 13618.604000, 1617.800047, 1617.800047, 0.000000, X, Y) && !ellipse(19393.284000, 15189.216000, 1448.328042, 1448.328042, 0.000000, X, Y) && !ellipse(19934.871384, 18132.292343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20300.073318, 17344.111053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18988.194061, 16324.907261, 1315.288038, 495.193311, 100.620329, X, Y) && !ellipse(21639.982000, 19075.266000, 4632.672133, 4632.672133, 0.000000, X, Y) && !ellipse(20373.312000, 19595.724400, 4714.824136, 4714.824136, 0.000000, X, Y) && !ellipse(20720.204400, 20950.305600, 861.176025, 861.176025, 0.000000, X, Y) && !ellipse(24363.902000, 21416.246600, 1363.024039, 1363.024039, 0.000000, X, Y) && !ellipse(23172.040120, 21880.075000, 750.392822, 750.392822, 0.000000, X, Y) && !ellipse(21500.872000, 20189.271400, 1518.880044, 1518.880044, 0.000000, X, Y) && !ellipse(23436.750153, 20663.258759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.583191, 18756.052979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18176.614000, 12508.770000, 1790.616052, 1790.616052, 0.000000, X, Y) && !ellipse(23203.658000, 20462.764000, 1415.760041, 1415.760041, 0.000000, X, Y) && !ellipse(20998.124000, 21230.609000, 1447.024042, 1447.024042, 0.000000, X, Y) && !ellipse(31059.576000, 26034.458000, 7868.592226, 7868.592226, 0.000000, X, Y) && !ellipse(21688.158000, 21271.998000, 1413.176041, 1413.176041, 0.000000, X, Y) && !ellipse(20996.253860, 17753.817917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21876.498000, 22104.292000, 8479.056244, 8479.056244, 0.000000, X, Y) && !ellipse(21462.441162, 16833.947174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21625.830000, 17968.869220, 1218.784035, 1218.784035, 0.000000, X, Y) && !ellipse(21932.662781, 15369.190079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29343.568680, 25412.804000, 7413.840213, 7413.840213, 0.000000, X, Y) && !ellipse(17781.990433, 10471.731003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17633.911484, 9611.368095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22649.518036, 18428.182083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22153.968765, 14937.565948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20912.664246, 13867.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21517.788000, 13003.968800, 1293.656037, 1293.656037, 359.752000, X, Y) && !ellipse(21896.172058, 12664.284729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29350.750916, 16810.102356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24338.233490, 15578.160797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30556.869659, 17187.338211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18533.103531, 8993.531494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29351.027039, 14046.309784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29437.044678, 15268.297638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29496.395203, 16823.190323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26569.343640, 20912.783200, 529.375215, 529.375215, 0.000000, X, Y) && !ellipse(20452.219772, 11887.295715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.042000, 15700.682000, 1128.808032, 1128.808032, 0.000000, X, Y) && !ellipse(35151.121735, 10489.691612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27243.026703, 15201.288681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27100.791473, 8829.861549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29163.847000, 14369.878000, 1852.328053, 1852.328053, 0.000000, X, Y) && !ellipse(27231.607422, 8216.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23236.698000, 15017.218000, 1754.656050, 1754.656050, 0.000000, X, Y) && !ellipse(32560.999939, 21662.521515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27168.420380, 7447.426292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.498260, 7703.092339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20543.502800, 11000.468200, 1132.608033, 1132.608033, 0.000000, X, Y) && !ellipse(27065.588440, 10108.546227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.791962, 14687.447586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.938873, 18566.856918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28870.655243, 15169.882339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25651.673828, 18994.728165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25747.180542, 7309.183563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30998.286865, 12040.658173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27698.600525, 7540.433296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34531.639679, 10059.630630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.762390, 7861.019455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33453.934082, 13784.862411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25093.034424, 8126.277458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26198.777130, 7933.021194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31140.381378, 14388.414291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.000000, 9530.002068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33696.550659, 17508.898102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32673.278473, 14203.036163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28203.313629, 8560.899117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28753.536591, 8200.054749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27825.046295, 9076.035866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33617.964447, 11776.570374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28552.200409, 7616.821808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24325.653961, 10006.594429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34683.228577, 15683.755295, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:50 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src37.gif
[Mon May 27 10:49:51 2013] Mean detx,y = (11152.04, 3243.40) 
[Mon May 27 10:49:56 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 10:51:40 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 10:51:41 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Mon May 27 10:51:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Mon May 27 18:05:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 18:05:26 2013] rmf not generated due to insufficient counts