[Mon May 27 08:09:10 2013] Detection parameters:
  Position = (238.3, 128.1) = 15 3 57.38 -41 53 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 388.6 +/- 46.0
  Background counts = 710.5
  Rate = 0.003 +/- 0.0004

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 13.10'
[Mon May 27 08:12:37 2013] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 12.98"
[Mon May 27 08:12:37 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.009
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 96 for pass 0, mean size = 12.98"
[Mon May 27 08:12:40 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src96.ximg exists
[Mon May 27 08:12:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src96.csv
[Mon May 27 08:12:40 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src96_1.ximg exists
[Mon May 27 08:12:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src96.csv
[Mon May 27 08:12:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:43 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Mon May 27 08:12:43 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Mon May 27 08:12:43 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src96 appears to have run properly
[Mon May 27 08:14:02 2013] Warning, spatial fit 96 centroid is now closest to src. 69
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:49 2013] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 12.98"
[Mon May 27 08:15:49 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.009
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 94 for pass 1, mean size = 12.98"
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src94.ximg exists
[Mon May 27 08:15:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src94.csv
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src94_1.ximg exists
[Mon May 27 08:15:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src94.csv
[Mon May 27 08:15:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src94.ximg exists
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src94_1.ximg exists
[Mon May 27 08:15:56 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src94 appears to have run properly
[Mon May 27 08:17:20 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 191 at 10.903306 pixels away
[Mon May 27 08:17:21 2013] Spatial fit model total counts = 9595.860000, observed total counts = 9588.000000
[Mon May 27 08:17:21 2013] Offset between fit and detection position for source 191 = 1.917992 pixels
[Mon May 27 08:17:21 2013] 9556.843000 total counts/ 8842.610000 bgd. counts: snr = 7.595383
Spatial fit parameters:
  Offset between fit and detection position for source 191 = 1.917992 pixels
  Position = (236.7, 127.0) = 15 3 58.01 -41 53 39.4
  Extent = 14.2 (11.3-21.0)", rotation angle = 0
  Source counts = 714.2 +/- 97.8
  Background counts = 8842.6
  Rate = 0.007 +/- 0.0009
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:59 2013] XMMSAS src. selection expression = ellipse(20543.502800, 11000.468200, 849.456024, 849.456024, 0.000000, X, Y)
[Mon May 27 08:43:59 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src191_src.reg
[Mon May 27 08:43:59 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (188, 78) - (286, 176)
[Mon May 27 08:43:59 2013] XMMSAS bgd. selection expression = annulus(20543.502800, 11000.468200, 1415.760041, 2831.520081, X, Y) && !ellipse(18754.430000, 13915.860000, 5749.872165, 5749.872165, 0.000000, X, Y) && !ellipse(19294.602000, 14947.334000, 1664.560048, 1664.560048, 0.000000, X, Y) && !ellipse(18722.698000, 13618.604000, 1617.800047, 1617.800047, 0.000000, X, Y) && !ellipse(19393.284000, 15189.216000, 1448.328042, 1448.328042, 0.000000, X, Y) && !ellipse(18176.614000, 12508.770000, 1790.616052, 1790.616052, 0.000000, X, Y) && !ellipse(21876.498000, 22104.292000, 8479.056244, 8479.056244, 0.000000, X, Y) && !ellipse(17781.990433, 10471.731003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17633.911484, 9611.368095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20912.664246, 13867.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21517.788000, 13003.968800, 1293.656037, 1293.656037, 359.752000, X, Y) && !ellipse(21896.172058, 12664.284729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18533.103531, 8993.531494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20452.219772, 11887.295715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23236.698000, 15017.218000, 1754.656050, 1754.656050, 0.000000, X, Y) && !ellipse(24179.791962, 14687.447586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.000000, 9530.002068, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:59 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src191.gif
[Mon May 27 12:28:44 2013] Mean detx,y = (10741.50, 8781.72) 
[Mon May 27 12:28:48 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 12:29:26 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 12:29:26 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src191_src_b10.pi.gz
[Mon May 27 12:29:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src191_bgd.pi.gz