[Mon May 27 08:09:08 2013] Detection parameters:
  Position = (339.3, 168.0) = 15 3 18.03 -41 50 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.9 +/- 30.6
  Background counts = 275.9
  Rate = 0.004 +/- 0.0005

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 9.91'
[Mon May 27 08:12:37 2013] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 11.39"
[Mon May 27 08:12:37 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 11.39"
[Mon May 27 08:12:40 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src85.ximg exists
[Mon May 27 08:12:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src85.csv
[Mon May 27 08:12:40 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src85_1.ximg exists
[Mon May 27 08:12:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src85.csv
[Mon May 27 08:12:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:42 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Mon May 27 08:12:42 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Mon May 27 08:12:42 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Mon May 27 08:14:02 2013] Warning, spatial fit 85 centroid is now closest to src. 170
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:02 2013] Source is confused with source 182
[Mon May 27 08:15:49 2013] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 11.39"
[Mon May 27 08:15:49 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 84 for pass 1, mean size = 11.39"
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src84.ximg exists
[Mon May 27 08:15:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src84.csv
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src84_1.ximg exists
[Mon May 27 08:15:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src84.csv
[Mon May 27 08:15:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Mon May 27 08:15:56 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src84 appears to have run properly
[Mon May 27 08:17:20 2013] Spatial fit model total counts = 3438.560000, observed total counts = 3439.000000
[Mon May 27 08:17:20 2013] Offset between fit and detection position for source 173 = 4.190753 pixels
[Mon May 27 08:17:20 2013] Warning, changing simple spatial fit ID from 84 to 72
[Mon May 27 08:17:20 2013] 3419.482000 total counts/ 2775.140000 bgd. counts: snr = 12.231339
Spatial fit parameters:
  Offset between fit and detection position for source 173 = 4.190753 pixels
  Position = (335.8, 165.7) = 15 3 19.41 -41 50 51.0
  Extent = 23.2 (6.2-46.3)", rotation angle = 0
  Source counts = 644.3 +/- 58.5
  Background counts = 2775.1
  Rate = 0.006 +/- 0.0005
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:58 2013] XMMSAS src. selection expression = ellipse(29163.847000, 14369.878000, 1389.246040, 1389.246040, 0.000000, X, Y)
[Mon May 27 08:43:58 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src173_src.reg
[Mon May 27 08:43:58 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (256, 86) - (416, 246)
[Mon May 27 08:43:58 2013] XMMSAS bgd. selection expression = annulus(29163.847000, 14369.878000, 2315.410067, 4630.820133, X, Y) && !ellipse(27249.469000, 19947.850000, 1426.904041, 1426.904041, 0.000000, X, Y) && !ellipse(21639.982000, 19075.266000, 4632.672133, 4632.672133, 0.000000, X, Y) && !ellipse(20373.312000, 19595.724400, 4714.824136, 4714.824136, 0.000000, X, Y) && !ellipse(31059.576000, 26034.458000, 7868.592226, 7868.592226, 0.000000, X, Y) && !ellipse(21876.498000, 22104.292000, 8479.056244, 8479.056244, 0.000000, X, Y) && !ellipse(25892.094696, 12493.758835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29343.568680, 25412.804000, 7413.840213, 7413.840213, 0.000000, X, Y) && !ellipse(29350.750916, 16810.102356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24338.233490, 15578.160797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30556.869659, 17187.338211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29351.027039, 14046.309784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29437.044678, 15268.297638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29496.395203, 16823.190323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.042000, 15700.682000, 1128.808032, 1128.808032, 0.000000, X, Y) && !ellipse(27243.026703, 15201.288681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23236.698000, 15017.218000, 1754.656050, 1754.656050, 0.000000, X, Y) && !ellipse(27065.588440, 10108.546227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.791962, 14687.447586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.938873, 18566.856918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28870.655243, 15169.882339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25651.673828, 18994.728165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30998.286865, 12040.658173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34531.639679, 10059.630630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33453.934082, 13784.862411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31140.381378, 14388.414291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.000000, 9530.002068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33696.550659, 17508.898102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32673.278473, 14203.036163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27825.046295, 9076.035866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33617.964447, 11776.570374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24325.653961, 10006.594429, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:58 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src173.gif
[Mon May 27 12:15:05 2013] Mean detx,y = (10508.13, -472.34) 
[Mon May 27 12:15:10 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 12:16:07 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 12:16:08 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src173_src_b10.pi.gz
[Mon May 27 12:16:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src173_bgd.pi.gz