[Mon May 27 08:09:07 2013] Detection parameters:
  Position = (313.7, 175.3) = 15 3 28.01 -41 50 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.5 +/- 31.9
  Background counts = 348.6
  Rate = 0.004 +/- 0.0005

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 9.00'
[Mon May 27 08:12:37 2013] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 10.93"
[Mon May 27 08:12:37 2013] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.827
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 10.93"
[Mon May 27 08:12:40 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src83.ximg exists
[Mon May 27 08:12:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src83.csv
[Mon May 27 08:12:40 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src83_1.ximg exists
[Mon May 27 08:12:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src83.csv
[Mon May 27 08:12:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:42 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Mon May 27 08:12:42 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Mon May 27 08:12:42 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Mon May 27 08:14:02 2013] Warning, spatial fit 83 centroid is now closest to src. 160
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:49 2013] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 10.93"
[Mon May 27 08:15:49 2013] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.827
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 82 for pass 1, mean size = 10.93"
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src82.ximg exists
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src82_1.ximg exists
[Mon May 27 08:15:53 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src82 appears to have run properly
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Mon May 27 08:15:56 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src82 appears to have run properly
[Mon May 27 08:17:21 2013] Source 166 is offset by -3.448865 and 9.186652 pixels which is larger than
2 X fitted extent = 1.255972 x 1.255972, not incorporating fit results
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:58 2013] XMMSAS src. selection expression = ellipse(27243.026703, 15201.288681, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 08:43:58 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src166_src.reg
[Mon May 27 08:43:58 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (276, 138) - (351, 213)
[Mon May 27 08:43:58 2013] XMMSAS bgd. selection expression = annulus(27243.026703, 15201.288681, 1087.500000, 2175.000000, X, Y) && !ellipse(21639.982000, 19075.266000, 4632.672133, 4632.672133, 0.000000, X, Y) && !ellipse(20373.312000, 19595.724400, 4714.824136, 4714.824136, 0.000000, X, Y) && !ellipse(21876.498000, 22104.292000, 8479.056244, 8479.056244, 0.000000, X, Y) && !ellipse(25892.094696, 12493.758835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29350.750916, 16810.102356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24338.233490, 15578.160797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29351.027039, 14046.309784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29437.044678, 15268.297638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29496.395203, 16823.190323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.042000, 15700.682000, 1128.808032, 1128.808032, 0.000000, X, Y) && !ellipse(29163.847000, 14369.878000, 1852.328053, 1852.328053, 0.000000, X, Y) && !ellipse(28870.655243, 15169.882339, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:58 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src166.gif
[Mon May 27 12:13:45 2013] Mean detx,y = (9104.31, 1080.95) 
[Mon May 27 12:13:47 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 12:14:06 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 12:14:06 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src166_src_b10.pi.gz
[Mon May 27 12:14:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src166_bgd.pi.gz
[Mon May 27 20:25:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 20:25:21 2013] rmf not generated due to insufficient counts