[Mon May 27 08:08:45 2013] Detection parameters:
  Position = (339.2, 290.1) = 15 3 18.11 -41 41 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2149.6 +/- 70.7
  Background counts = 563.8
  Rate = 0.02 +/- 0.0007

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 3.02'
[Mon May 27 08:12:37 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Mon May 27 08:12:37 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 7.94"
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src35.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src35.csv
[Mon May 27 08:12:39 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src35_1.ximg exists
[Mon May 27 08:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src35.csv
[Mon May 27 08:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Mon May 27 08:12:41 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Mon May 27 08:12:41 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Mon May 27 08:14:01 2013] Source 14 is offset by -5.118137 and -7.786365 pixels which is larger than
2 X fitted extent = 7.127081 x 7.127081, not incorporating fit results
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:02 2013] Source is confused with source 50
[Mon May 27 08:14:02 2013] Source is confused with source 45
[Mon May 27 08:15:49 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Mon May 27 08:15:49 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 7.94"
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src34.ximg exists
[Mon May 27 08:15:52 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src34_1.ximg exists
[Mon May 27 08:15:52 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src34 appears to have run properly
[Mon May 27 08:15:55 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Mon May 27 08:15:55 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Mon May 27 08:15:55 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Mon May 27 08:17:20 2013] Spatial fit model total counts = 15875.000000, observed total counts = 15872.000000
[Mon May 27 08:17:20 2013] Offset between fit and detection position for source 14 = 4.438172 pixels
[Mon May 27 08:17:20 2013] 14742.190000 total counts/ 13010.600000 bgd. counts: snr = 15.180861
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 4.438172 pixels
  Position = (334.8, 290.5) = 15 3 19.83 -41 41 48.3
  Extent = 15.9 (15.8-31.7)", rotation angle = 0
  Source counts = 1731.6 +/- 121.4
  Background counts = 13010.6
  Rate = 0.02 +/- 0.001
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:50 2013] Counts = 1731.590000, rescaling region sizes by 2.000000
[Mon May 27 08:43:50 2013] XMMSAS src. selection expression = ellipse(29077.902000, 25225.335800, 1904.904055, 1904.904055, 0.000000, X, Y)
[Mon May 27 08:43:50 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src14_src.reg
[Mon May 27 08:43:50 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (225, 181) - (444, 400)
[Mon May 27 08:43:50 2013] XMMSAS bgd. selection expression = annulus(29077.902000, 25225.335800, 6349.680183, 12699.360365, X, Y) && !ellipse(25377.639400, 24747.039228, 3374.760097, 3374.760097, 0.000000, X, Y) && !ellipse(18754.430000, 13915.860000, 5749.872165, 5749.872165, 0.000000, X, Y) && !ellipse(27249.469000, 19947.850000, 1426.904041, 1426.904041, 0.000000, X, Y) && !ellipse(19294.602000, 14947.334000, 1664.560048, 1664.560048, 0.000000, X, Y) && !ellipse(18722.698000, 13618.604000, 1617.800047, 1617.800047, 0.000000, X, Y) && !ellipse(23503.028000, 23846.182000, 1204.664035, 1204.664035, 0.000000, X, Y) && !ellipse(19393.284000, 15189.216000, 1448.328042, 1448.328042, 0.000000, X, Y) && !ellipse(19934.871384, 18132.292343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23085.437868, 23770.838440, 1711.704049, 765.070428, 354.031060, X, Y) && !ellipse(20300.073318, 17344.111053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18988.194061, 16324.907261, 1315.288038, 495.193311, 100.620329, X, Y) && !ellipse(22460.996000, 22557.710000, 1315.288038, 1315.288038, 0.000000, X, Y) && !ellipse(21639.982000, 19075.266000, 4632.672133, 4632.672133, 0.000000, X, Y) && !ellipse(20373.312000, 19595.724400, 4714.824136, 4714.824136, 0.000000, X, Y) && !ellipse(20720.204400, 20950.305600, 861.176025, 861.176025, 0.000000, X, Y) && !ellipse(24363.902000, 21416.246600, 1363.024039, 1363.024039, 0.000000, X, Y) && !ellipse(23172.040120, 21880.075000, 750.392822, 750.392822, 0.000000, X, Y) && !ellipse(21500.872000, 20189.271400, 1518.880044, 1518.880044, 0.000000, X, Y) && !ellipse(23436.750153, 20663.258759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.583191, 18756.052979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24482.656464, 22244.257019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18176.614000, 12508.770000, 1790.616052, 1790.616052, 0.000000, X, Y) && !ellipse(23203.658000, 20462.764000, 1415.760041, 1415.760041, 0.000000, X, Y) && !ellipse(20998.124000, 21230.609000, 1447.024042, 1447.024042, 0.000000, X, Y) && !ellipse(31059.576000, 26034.458000, 7868.592226, 7868.592226, 0.000000, X, Y) && !ellipse(21688.158000, 21271.998000, 1413.176041, 1413.176041, 0.000000, X, Y) && !ellipse(20996.253860, 17753.817917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21876.498000, 22104.292000, 8479.056244, 8479.056244, 0.000000, X, Y) && !ellipse(25133.945600, 22509.906000, 1239.896036, 1239.896036, 0.000000, X, Y) && !ellipse(24668.913000, 21664.850000, 349.948010, 349.948010, 0.000000, X, Y) && !ellipse(21706.183600, 22991.203200, 890.056026, 890.056026, 0.000000, X, Y) && !ellipse(21462.441162, 16833.947174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25892.094696, 12493.758835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21625.830000, 17968.869220, 1218.784035, 1218.784035, 0.000000, X, Y) && !ellipse(21932.662781, 15369.190079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27019.830000, 23275.869220, 1218.784035, 1218.784035, 0.000000, X, Y) && !ellipse(29939.678000, 24363.380000, 1677.712048, 1677.712048, 0.000000, X, Y) && !ellipse(29343.568680, 25412.804000, 7413.840213, 7413.840213, 0.000000, X, Y) && !ellipse(32178.219055, 26211.521271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.441406, 23878.775360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22649.518036, 18428.182083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.093600, 23459.764600, 1222.352035, 1222.352035, 0.000000, X, Y) && !ellipse(26792.494781, 22299.638275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22153.968765, 14937.565948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20912.664246, 13867.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28601.826000, 22707.672000, 1043.984030, 1043.984030, 0.000000, X, Y) && !ellipse(30978.032000, 24630.014000, 1414.096041, 1414.096041, 0.000000, X, Y) && !ellipse(28048.366119, 25775.031799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28914.545532, 23304.635895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33080.384000, 26144.014000, 1536.352044, 1536.352044, 0.000000, X, Y) && !ellipse(21517.788000, 13003.968800, 1293.656037, 1293.656037, 359.752000, X, Y) && !ellipse(30302.021362, 23778.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31860.892609, 26697.157990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21896.172058, 12664.284729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29350.750916, 16810.102356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34614.996000, 25845.178000, 1589.008046, 1589.008046, 0.000000, X, Y) && !ellipse(33467.692444, 37284.944885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24338.233490, 15578.160797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30556.869659, 17187.338211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41404.761810, 22305.338623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40040.146000, 22975.384000, 2036.792059, 2036.792059, 0.000000, X, Y) && !ellipse(28881.722000, 26301.579000, 1396.000040, 1396.000040, 0.000000, X, Y) && !ellipse(31376.591370, 25172.058716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40287.224000, 22818.152000, 4073.584117, 1545.536044, 32.870000, X, Y) && !ellipse(31627.567980, 23004.667800, 813.608023, 813.608023, 0.000000, X, Y) && !ellipse(29351.027039, 14046.309784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29437.044678, 15268.297638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29496.395203, 16823.190323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26569.343640, 20912.783200, 529.375215, 529.375215, 0.000000, X, Y) && !ellipse(41883.330841, 21864.190903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20452.219772, 11887.295715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.042000, 15700.682000, 1128.808032, 1128.808032, 0.000000, X, Y) && !ellipse(32685.232000, 24478.740120, 1525.696044, 1525.696044, 0.000000, X, Y) && !ellipse(38260.414000, 24278.100000, 1831.896053, 1831.896053, 0.000000, X, Y) && !ellipse(27243.026703, 15201.288681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29163.847000, 14369.878000, 1852.328053, 1852.328053, 0.000000, X, Y) && !ellipse(23236.698000, 15017.218000, 1754.656050, 1754.656050, 0.000000, X, Y) && !ellipse(32560.999939, 21662.521515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34303.437256, 24943.158020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36863.496155, 24737.815399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33637.802000, 24239.700000, 1525.696044, 1525.696044, 0.000000, X, Y) && !ellipse(31585.343048, 33182.534332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40512.154600, 22518.282200, 2126.824061, 2126.824061, 0.000000, X, Y) && !ellipse(35528.953644, 24823.150696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30716.590000, 23330.594000, 1353.856039, 1353.856039, 0.000000, X, Y) && !ellipse(24179.791962, 14687.447586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.938873, 18566.856918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28870.655243, 15169.882339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25651.673828, 18994.728165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41508.472565, 21352.491089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36247.802826, 24664.385254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38132.350586, 23710.706696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30998.286865, 12040.658173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35428.718323, 25524.420929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36854.275238, 29971.592346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35987.025848, 25180.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39894.233337, 21815.217560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38753.383179, 23448.137573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33453.934082, 13784.862411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23021.808899, 25374.350708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35791.735168, 24403.786163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31140.381378, 14388.414291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39152.760651, 23865.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33696.550659, 17508.898102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32673.278473, 14203.036163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33617.964447, 11776.570374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35328.432556, 23474.568390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34683.228577, 15683.755295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42136.286102, 27622.703857, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:50 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src14.gif
[Mon May 27 10:47:30 2013] Mean detx,y = (527.67, -3957.45) 
[Mon May 27 10:47:34 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 10:49:26 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 10:49:27 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 27 10:49:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src14_bgd.pi.gz