[Mon May 27 08:09:00 2013] Detection parameters:
  Position = (374.8, 249.6) = 15 3 4.26 -41 44 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 264.6 +/- 32.6
  Background counts = 433.7
  Rate = 0.003 +/- 0.0004

[Mon May 27 08:09:12 2013] Off-axis axis estimate = 6.57'
[Mon May 27 08:12:37 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:12:37 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Mon May 27 08:12:37 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.004
[Mon May 27 08:12:37 2013] Giving source the simple spatial ID 89 for pass 0, mean size = 9.72"
[Mon May 27 08:12:40 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src89.ximg exists
[Mon May 27 08:12:40 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src89_1.ximg exists
[Mon May 27 08:12:40 2013] Fit fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_src89 appears to have run properly
[Mon May 27 08:12:43 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Mon May 27 08:12:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src89.csv
[Mon May 27 08:12:43 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Mon May 27 08:12:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src89.csv
[Mon May 27 08:12:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass0_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:14:02 2013] Warning, spatial fit 89 centroid is now closest to src. 115
[Mon May 27 08:14:02 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:14:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:14:02 2013] Assessing source extent using major
[Mon May 27 08:14:02 2013] Source does appear to be extended
[Mon May 27 08:14:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:15:49 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Mon May 27 08:15:49 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Mon May 27 08:15:49 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.004
[Mon May 27 08:15:49 2013] Giving source the simple spatial ID 87 for pass 1, mean size = 9.72"
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src87.ximg exists
[Mon May 27 08:15:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src87.csv
[Mon May 27 08:15:53 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src87_1.ximg exists
[Mon May 27 08:15:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src87.csv
[Mon May 27 08:15:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Mon May 27 08:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src87.csv
[Mon May 27 08:15:56 2013] fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Mon May 27 08:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src87.csv
[Mon May 27 08:15:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630301_pi300-10000_cl_pass1_tfrozen_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 08:17:21 2013] Warning: source 87 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 121 at 12.452024 pixels away
[Mon May 27 08:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 08:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 08:17:21 2013] Assessing source extent using major
[Mon May 27 08:17:21 2013] Source does appear to be extended
[Mon May 27 08:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:43:58 2013] XMMSAS src. selection expression = ellipse(32560.999939, 21662.521515, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 08:43:58 2013] Writing source region out to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src121_src.reg
[Mon May 27 08:43:58 2013] Extracting stamp from image fullrun_mos1_xmm0555630301_pi300-10000_cl_sm2.00.img.gz, (337, 212) - (412, 287)
[Mon May 27 08:43:59 2013] XMMSAS bgd. selection expression = annulus(32560.999939, 21662.521515, 1087.500000, 2175.000000, X, Y) && !ellipse(31059.576000, 26034.458000, 7868.592226, 7868.592226, 0.000000, X, Y) && !ellipse(29939.678000, 24363.380000, 1677.712048, 1677.712048, 0.000000, X, Y) && !ellipse(29343.568680, 25412.804000, 7413.840213, 7413.840213, 0.000000, X, Y) && !ellipse(30978.032000, 24630.014000, 1414.096041, 1414.096041, 0.000000, X, Y) && !ellipse(30302.021362, 23778.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31627.567980, 23004.667800, 813.608023, 813.608023, 0.000000, X, Y) && !ellipse(32685.232000, 24478.740120, 1525.696044, 1525.696044, 0.000000, X, Y) && !ellipse(33637.802000, 24239.700000, 1525.696044, 1525.696044, 0.000000, X, Y) && !ellipse(30716.590000, 23330.594000, 1353.856039, 1353.856039, 0.000000, X, Y) && !ellipse(35328.432556, 23474.568390, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:43:59 2013] Writing fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src121.gif
[Mon May 27 12:23:34 2013] Mean detx,y = (4846.70, -6093.04) 
[Mon May 27 12:23:36 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 12:23:54 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 12:23:55 2013] Setting source spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src121_src_b10.pi.gz
[Mon May 27 12:23:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630301_pi300-10000_pass1_cl_src121_bgd.pi.gz
[Mon May 27 20:34:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 20:34:27 2013] rmf not generated due to insufficient counts