[Fri Jun  7 22:47:16 2013] Detection parameters:
  Position = (332.9, 169.0) = 15 3 55.97 -42 4 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3019.2 +/- 78.8
  Background counts = 384.5
  Rate = 0.03 +/- 0.0008

[Fri Jun  7 22:47:34 2013] Off-axis axis estimate = 9.71'
[Fri Jun  7 22:50:05 2013] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:50:05 2013] Initial guess for spatial extent in simple fitting = 11.28"
[Fri Jun  7 22:50:05 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.940
[Fri Jun  7 22:50:05 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 11.28"
[Fri Jun  7 22:50:09 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src70.ximg exists
[Fri Jun  7 22:50:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src70.csv
[Fri Jun  7 22:50:09 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src70_1.ximg exists
[Fri Jun  7 22:50:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src70.csv
[Fri Jun  7 22:50:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:50:13 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Fri Jun  7 22:50:13 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Fri Jun  7 22:50:13 2013] Fit fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Fri Jun  7 22:51:03 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 11.507810 pixels away
[Fri Jun  7 22:51:03 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:51:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:51:03 2013] Assessing source extent using major
[Fri Jun  7 22:51:03 2013] Source does appear to be extended
[Fri Jun  7 22:51:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:51:03 2013] Source is confused with source 76
[Fri Jun  7 22:52:35 2013] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:52:35 2013] Initial guess for spatial extent in simple fitting = 11.28"
[Fri Jun  7 22:52:35 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.940
[Fri Jun  7 22:52:35 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 11.28"
[Fri Jun  7 22:52:38 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src70.ximg exists
[Fri Jun  7 22:52:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src70.csv
[Fri Jun  7 22:52:38 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src70_1.ximg exists
[Fri Jun  7 22:52:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src70.csv
[Fri Jun  7 22:52:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:52:41 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Fri Jun  7 22:52:41 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Fri Jun  7 22:52:41 2013] Fit fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Fri Jun  7 22:53:29 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 11.511359 pixels away
[Fri Jun  7 22:53:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:53:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:53:29 2013] Assessing source extent using major
[Fri Jun  7 22:53:29 2013] Source does appear to be extended
[Fri Jun  7 22:53:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:55:21 2013] Counts = 3019.214355, rescaling region sizes by 2.000000
[Fri Jun  7 22:55:21 2013] XMMSAS src. selection expression = ellipse(28913.284393, 14658.551575, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun  7 22:55:21 2013] Not overwriting source region fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_src.reg
[Fri Jun  7 22:55:21 2013] Extracting stamp from image fullrun_pn_xmm0555630201_pi300-10000_cl_sm2.00.img.gz, (258, 94) - (408, 244)
[Fri Jun  7 22:55:21 2013] XMMSAS bgd. selection expression = annulus(28913.284393, 14658.551575, 4350.000000, 8700.000000, X, Y) && !ellipse(30698.924347, 24781.636658, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25830.887701, 27833.498423, 6456.024186, 3740.297713, 287.818438, X, Y) && !ellipse(32380.181824, 23827.604980, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29744.281000, 14391.090400, 634.237618, 634.237618, 0.000000, X, Y) && !ellipse(26093.330000, 26617.652000, 4499.280129, 4499.280129, 0.000000, X, Y) && !ellipse(31790.146698, 14392.890671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27549.472000, 23462.185000, 7390.080213, 6317.256182, 140.233000, X, Y) && !ellipse(26011.746000, 25992.780000, 4499.280129, 4499.280129, 0.000000, X, Y) && !ellipse(36273.997345, 23693.247223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31248.082642, 23131.002289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.782013, 22921.990417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31059.381600, 14603.556400, 863.496025, 863.496025, 0.000000, X, Y) && !ellipse(27009.292000, 23276.534000, 1231.680035, 1231.680035, 0.000000, X, Y) && !ellipse(24917.733459, 23518.910034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.259460, 23886.079346, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26427.682000, 21652.892000, 7849.104226, 7849.104226, 0.000000, X, Y) && !ellipse(25172.034821, 21952.040512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26984.330000, 22101.572000, 3924.552113, 3924.552113, 0.000000, X, Y) && !ellipse(30261.096080, 21586.145780, 901.128026, 901.128026, 0.000000, X, Y) && !ellipse(26217.085800, 21252.155800, 4302.840124, 4302.840124, 0.000000, X, Y) && !ellipse(25266.259155, 21350.057755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27232.516000, 20008.164600, 1434.280041, 1434.280041, 0.000000, X, Y) && !ellipse(26677.888600, 20001.294000, 4290.264123, 4290.264123, 0.000000, X, Y) && !ellipse(25589.187714, 19866.957062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29453.830000, 18884.606000, 1587.296046, 1587.296046, 0.000000, X, Y) && !ellipse(29788.952881, 18483.483688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27861.015600, 18850.557000, 3854.832111, 3854.832111, 0.000000, X, Y) && !ellipse(30937.263760, 18037.642800, 7751.904223, 3791.424109, 0.000000, X, Y) && !ellipse(26848.051270, 18228.436264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25695.210999, 18829.477814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30650.374000, 18265.556000, 2275.536065, 2275.536065, 0.000000, X, Y) && !ellipse(31105.631189, 17944.553729, 7751.904223, 5233.593124, 0.000000, X, Y) && !ellipse(29113.550000, 17329.414000, 1163.704033, 1163.704033, 0.000000, X, Y) && !ellipse(28043.900360, 17787.287216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28829.597870, 16743.370850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33355.559937, 16654.984924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30423.178600, 16218.206560, 1512.760044, 1512.760044, 0.000000, X, Y) && !ellipse(27392.917000, 16528.706200, 929.856027, 929.856027, 0.000000, X, Y) && !ellipse(33284.017517, 15541.173584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30480.851680, 15574.062400, 1228.048035, 1228.048035, 0.000000, X, Y) && !ellipse(28783.760600, 15446.685200, 1382.760040, 1382.760040, 0.000000, X, Y) && !ellipse(30207.353638, 13893.632324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30651.449768, 13982.059402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30222.763428, 23682.592590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35094.914764, 24221.452026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32384.103302, 23692.764008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28827.184448, 23346.091522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36950.732452, 23860.830017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38355.715546, 23253.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33791.327240, 23260.604889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21747.666977, 23014.579254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32052.245880, 22653.537750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36319.560303, 22895.187897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29262.277374, 22571.417694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30050.141388, 22733.793976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34923.912292, 22317.761505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34402.053009, 22139.850647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36712.140900, 22840.903168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33964.918365, 22305.662537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33635.888550, 21790.873596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29005.023621, 21967.596329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37751.380432, 21648.911835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36618.864410, 21772.725143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34225.042206, 21358.237900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36017.439209, 21285.930832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33544.948486, 21180.327042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32746.461700, 20894.957855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35937.740540, 20512.692047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31882.862976, 20164.320343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34601.928925, 20590.751236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29596.232269, 20731.041656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36963.354462, 20038.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32103.270233, 19592.334106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31293.664185, 19603.767990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36186.994690, 19396.119476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30767.073639, 19522.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32359.005310, 18831.771759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22856.812103, 18637.120941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36544.374908, 18134.688507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32535.352356, 18322.778748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36444.975922, 18293.536255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33092.374847, 17522.294052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27088.623474, 17440.807220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37930.316132, 17360.491257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26244.860474, 17346.428894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.727112, 16906.300705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34268.627167, 16758.456726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35352.481812, 16203.456039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34630.096130, 16131.237915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34674.185547, 15605.729294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35923.233459, 15102.695496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35381.854401, 14959.820404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34854.714264, 14890.481659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34179.696960, 14746.235245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33503.046814, 14625.626556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26512.575043, 16306.824295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28998.781647, 14223.197128, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 22:55:21 2013] Writing fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77.gif
[Fri Jun  7 22:56:41 2013] ../../xmm0555630201/products/events/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_src.evt and ../../xmm0555630201/products/events/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_bgd.evt exist, delete to re-create
[Fri Jun  7 22:56:41 2013] Mean detx,y = (-429.26, 12930.57) 
[Fri Jun  7 22:56:41 2013] ../../xmm0555630201/products/images/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_src.img and ../../xmm0555630201/products/images/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_bgd.img exist, delete to re-create
[Fri Jun  7 22:56:41 2013] ../../xmm0555630201/products/spectra/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_src_b10.pi.gz and ../../xmm0555630201/products/spectra/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_bgd.pi exist, delete to re-create
[Fri Jun  7 22:56:41 2013] Setting source spectrum file to fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Fri Jun  7 22:56:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Fri Jun  7 22:56:41 2013] ../../xmm0555630201/products/lightcurves/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_src.lc and ../../xmm0555630201/products/lightcurves/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_bgd.lc exist, delete to re-create
[Sun Jun  9 07:41:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 07:41:05 2013] rmf not generated due to insufficient counts
[Sun Jun  9 07:41:05 2013] fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77.arf exists, delete to re-create
[Sun Jun  9 14:56:00 2013] Updating aperture counts using extracted products
[Sun Jun  9 14:56:00 2013] Total counts from fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_src_b10.pi.gz = 48474.00
[Sun Jun  9 14:56:00 2013] Total counts from fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_bgd.pi.gz = 12659.00
[Sun Jun  9 14:56:00 2013] Got source and background scale factors 5343166.000000, 9013978.000000
[Sun Jun  9 14:56:00 2013] User source parameters:
  Position = (332.9, 169.0) = 15 3 55.97 -42 4 26.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40970.2 +/- 221.2
  Background aperture counts = 7503.8
  Rate = 0.4 +/- 0.002

[Sun Jun  9 14:56:00 2013] Updating counts from extracted products
[Sun Jun  9 14:56:00 2013] Set source signif. to 40970.19/86.62 = 472.96
[Sun Jun  9 14:56:59 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 14:56:59 2013] Using photon index=1.80, rate=0.401, arf fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77.arf
[Sun Jun  9 14:56:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 14:57:00 2013] Updating source flux to 2.4e-12
[Sun Jun  9 15:01:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 15:02:35 2013] xmm0555630201/analysis//spectral/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src77_pl.csv not found, spectral fit skipped or did not complete