[Fri Jun  7 22:47:11 2013] Detection parameters:
  Position = (354.9, 463.9) = 15 3 47.51 -41 43 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5774.6 +/- 109.0
  Background counts = 553.8
  Rate = 0.06 +/- 0.001

[Fri Jun  7 22:47:34 2013] Off-axis axis estimate = 12.67'
[Fri Jun  7 22:50:05 2013] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:50:05 2013] Initial guess for spatial extent in simple fitting = 12.76"
[Fri Jun  7 22:50:05 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.039
[Fri Jun  7 22:50:05 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 12.76"
[Fri Jun  7 22:50:07 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun  7 22:50:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src7.csv
[Fri Jun  7 22:50:07 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun  7 22:50:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src7.csv
[Fri Jun  7 22:50:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:50:10 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun  7 22:50:10 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun  7 22:50:10 2013] Fit fullrun_pn_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jun  7 22:51:02 2013] Spatial fit model total counts = 34871.200000, observed total counts = 34795.000000
[Fri Jun  7 22:51:02 2013] Offset between fit and detection position for source 10 = 0.953546 pixels
[Fri Jun  7 22:51:02 2013] 29898.790000 total counts/ 26603.100000 bgd. counts: snr = 20.205995
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.953546 pixels
  Position = (354.0, 463.6) = 15 3 47.86 -41 43 5.2
  Extent = 10.7 (9.7-11.8)", rotation angle = 0
  Source counts = 3295.7 +/- 172.9
  Background counts = 26603.1
  Rate = 0.03 +/- 0.002
[Fri Jun  7 22:51:03 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:51:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:51:03 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 22:51:03 2013] Source does appear to be extended
[Fri Jun  7 22:51:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:51:03 2013] Source is confused with source 9
[Fri Jun  7 22:51:03 2013] Source is confused with source 14
[Fri Jun  7 22:51:03 2013] Source is confused with source 78
[Fri Jun  7 22:52:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:52:35 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Fri Jun  7 22:52:35 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.020
[Fri Jun  7 22:52:35 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.75"
[Fri Jun  7 22:52:36 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun  7 22:52:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src7.csv
[Fri Jun  7 22:52:36 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun  7 22:52:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src7.csv
[Fri Jun  7 22:52:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:52:39 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun  7 22:52:39 2013] fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun  7 22:52:39 2013] Fit fullrun_pn_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jun  7 22:53:28 2013] Spatial fit model total counts = 31647.900000, observed total counts = 31649.000000
[Fri Jun  7 22:53:28 2013] Offset between fit and detection position for source 10 = 0.280200 pixels
[Fri Jun  7 22:53:28 2013] 27486.810000 total counts/ 24154.500000 bgd. counts: snr = 21.441066
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.280200 pixels
  Position = (353.8, 463.8) = 15 3 47.93 -41 43 4.2
  Extent = 10.7 (9.7-11.7)", rotation angle = 0
  Source counts = 3332.3 +/- 165.8
  Background counts = 24154.5
  Rate = 0.03 +/- 0.002
[Fri Jun  7 22:53:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:53:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:53:29 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 22:53:29 2013] Source does appear to be extended
[Fri Jun  7 22:53:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:55:02 2013] Counts = 3332.310000, rescaling region sizes by 2.000000
[Fri Jun  7 22:55:02 2013] XMMSAS src. selection expression = ellipse(30730.807760, 40301.261280, 1289.856037, 1289.856037, 0.000000, X, Y)
[Fri Jun  7 22:55:02 2013] Not overwriting source region fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun  7 22:55:02 2013] Extracting stamp from image fullrun_pn_xmm0555630201_pi300-10000_cl_sm2.00.img.gz, (280, 390) - (428, 538)
[Fri Jun  7 22:55:02 2013] XMMSAS bgd. selection expression = annulus(30730.807760, 40301.261280, 4299.520124, 8599.040247, X, Y) && !ellipse(26224.392800, 29484.284000, 3724.176107, 3724.176107, 0.000000, X, Y) && !ellipse(26025.320400, 28962.284000, 3724.176107, 3724.176107, 0.000000, X, Y) && !ellipse(25830.887701, 27833.498423, 6456.024186, 3740.297713, 287.818438, X, Y) && !ellipse(33167.812000, 41450.440000, 6164.352177, 6164.352177, 0.000000, X, Y) && !ellipse(31745.489105, 40576.042206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31167.202000, 40251.254000, 6017.064173, 6017.064173, 0.000000, X, Y) && !ellipse(29533.132843, 39270.970520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30571.746000, 38773.176000, 1897.024055, 1897.024055, 0.000000, X, Y) && !ellipse(30088.544000, 38346.386000, 5598.792161, 5598.792161, 0.000000, X, Y) && !ellipse(30748.438000, 40027.880000, 6168.048177, 6168.048177, 0.000000, X, Y) && !ellipse(29257.358000, 38300.478000, 5757.936166, 5757.936166, 0.000000, X, Y) && !ellipse(28891.426000, 37322.228000, 11197.584322, 11197.584322, 0.000000, X, Y) && !ellipse(32466.226000, 38244.722000, 5778.168166, 5778.168166, 0.000000, X, Y) && !ellipse(29206.022614, 37012.299927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30774.486000, 36832.352000, 5360.616154, 5360.616154, 0.000000, X, Y) && !ellipse(28634.664800, 37328.466000, 1280.128037, 1280.128037, 0.000000, X, Y) && !ellipse(30373.312000, 36448.420000, 5460.024157, 5460.024157, 0.000000, X, Y) && !ellipse(28330.548000, 36081.372000, 7051.152203, 7051.152203, 0.000000, X, Y) && !ellipse(29758.596000, 35982.172000, 10920.048314, 10920.048314, 0.000000, X, Y) && !ellipse(29361.183000, 35217.990000, 5142.312148, 5142.312148, 0.000000, X, Y) && !ellipse(29222.490000, 35070.982000, 5142.312148, 5142.312148, 0.000000, X, Y) && !ellipse(27848.612600, 34093.756000, 4459.248128, 4459.248128, 0.000000, X, Y) && !ellipse(29068.144000, 33554.364000, 4679.184135, 4679.184135, 0.000000, X, Y) && !ellipse(28090.026000, 33229.652000, 4499.280129, 4499.280129, 0.000000, X, Y) && !ellipse(27266.533000, 32126.700000, 7954.776229, 7954.776229, 0.000000, X, Y) && !ellipse(26961.260200, 32745.887800, 3741.720108, 3741.720108, 0.000000, X, Y) && !ellipse(28948.348000, 33612.660000, 4679.184135, 4679.184135, 0.000000, X, Y) && !ellipse(27350.484000, 31241.723400, 4499.280129, 4499.280129, 72.910000, X, Y) && !ellipse(31956.566000, 40731.790000, 6168.048177, 6168.048177, 0.000000, X, Y) && !ellipse(28932.490000, 40295.958000, 2009.144058, 2009.144058, 0.000000, X, Y) && !ellipse(34805.092000, 39904.618000, 1588.872046, 1588.872046, 0.000000, X, Y) && !ellipse(35224.153625, 40058.152191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34092.978394, 39542.027771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33206.456146, 39373.258179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34868.823800, 39335.750000, 2087.944060, 2087.944060, 0.000000, X, Y) && !ellipse(33045.960000, 38950.494000, 2088.032060, 2088.032060, 0.000000, X, Y) && !ellipse(27834.994690, 36974.590546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37591.882000, 36844.893000, 2101.368060, 2101.368060, 0.000000, X, Y) && !ellipse(33247.447000, 35007.335340, 1637.064047, 1637.064047, 0.000000, X, Y) && !ellipse(36333.053162, 34127.738037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36671.288000, 33885.306000, 1912.920055, 1912.920055, 0.000000, X, Y) && !ellipse(38248.040833, 33361.568268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33421.923600, 33438.437640, 657.807219, 657.807219, 0.000000, X, Y) && !ellipse(38683.898407, 33177.091522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32584.565800, 33172.631960, 1051.448030, 1051.448030, 0.000000, X, Y) && !ellipse(39132.894000, 33000.218000, 2007.832058, 2007.832058, 0.000000, X, Y) && !ellipse(36162.608246, 32659.751099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33508.923600, 32568.437640, 657.807219, 657.807219, 0.000000, X, Y) && !ellipse(38683.447052, 32401.135315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37095.694397, 32225.507782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33222.896088, 32133.253479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36280.403400, 32074.110000, 972.432028, 972.432028, 0.000000, X, Y) && !ellipse(39182.620000, 32076.836000, 1033.712030, 1033.712030, 0.000000, X, Y) && !ellipse(35031.756927, 31795.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32108.774109, 32048.990814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37925.887543, 31868.302795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.761719, 31435.612671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32600.172241, 31342.376007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32042.103668, 31294.394318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35302.949585, 31060.446411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34219.572845, 30846.007660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39209.655273, 31079.647583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35969.403000, 33332.560000, 1846.392053, 1846.392053, 0.000000, X, Y)
[Fri Jun  7 22:55:02 2013] Writing fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10.gif
[Fri Jun  7 22:55:53 2013] ../../xmm0555630201/products/events/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0555630201/products/events/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Jun  7 22:55:53 2013] Mean detx,y = (6894.84, -11217.95) 
[Fri Jun  7 22:55:53 2013] ../../xmm0555630201/products/images/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_src.img and ../../xmm0555630201/products/images/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Jun  7 22:55:53 2013] ../../xmm0555630201/products/spectra/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0555630201/products/spectra/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Jun  7 22:55:53 2013] Setting source spectrum file to fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun  7 22:55:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun  7 22:55:53 2013] ../../xmm0555630201/products/lightcurves/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0555630201/products/lightcurves/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Jun  8 09:52:01 2013] fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10.rmf exists, delete to re-create
[Sat Jun  8 09:52:01 2013] fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Sun Jun  9 14:55:33 2013] Updating aperture counts using extracted products
[Sun Jun  9 14:55:33 2013] Total counts from fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 74901.00
[Sun Jun  9 14:55:33 2013] Total counts from fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 0.00
[Sun Jun  9 14:55:33 2013] Got source and background scale factors 5041112.000000, 0.000000
[Sun Jun  9 14:55:33 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun  9 14:56:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 14:56:54 2013] Using photon index=1.80, rate=0.0327, arf fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10.arf
[Sun Jun  9 14:56:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 14:56:54 2013] Updating source flux to 2e-13
[Sun Jun  9 15:01:44 2013] Flag c found in src. 10 procflags, skipping spectral fitting
[Sun Jun  9 15:02:35 2013] xmm0555630201/analysis//spectral/fullrun_pn_xmm0555630201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete