[Fri Jun  7 22:47:50 2013] Detection parameters:
  Position = (303.3, 341.0) = 15 4 7.55 -41 51 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7564.0 +/- 111.2
  Background counts = 316.3
  Rate = 0.08 +/- 0.001

[Fri Jun  7 22:48:08 2013] Off-axis axis estimate = 3.10'
[Fri Jun  7 22:50:21 2013] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:50:21 2013] Initial guess for spatial extent in simple fitting = 7.98"
[Fri Jun  7 22:50:21 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.917
[Fri Jun  7 22:50:21 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.98"
[Fri Jun  7 22:50:22 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun  7 22:50:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src3.csv
[Fri Jun  7 22:50:22 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun  7 22:50:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src3.csv
[Fri Jun  7 22:50:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:50:26 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun  7 22:50:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun  7 22:50:26 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun  7 22:50:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun  7 22:50:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:51:43 2013] Spatial fit model total counts = 33275.100000, observed total counts = 28007.000000
[Fri Jun  7 22:51:43 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 22:51:43 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:51:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:51:43 2013] Assessing source extent using major
[Fri Jun  7 22:51:43 2013] Source does appear to be extended
[Fri Jun  7 22:51:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:51:43 2013] Source is confused with source 9
[Fri Jun  7 22:52:52 2013] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:52:52 2013] Initial guess for spatial extent in simple fitting = 7.98"
[Fri Jun  7 22:52:52 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.917
[Fri Jun  7 22:52:52 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.98"
[Fri Jun  7 22:52:53 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun  7 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src3.csv
[Fri Jun  7 22:52:53 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun  7 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src3.csv
[Fri Jun  7 22:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:52:55 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun  7 22:52:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun  7 22:52:55 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun  7 22:52:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun  7 22:52:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:54:12 2013] Warning, spatial fit 3 centroid is now closest to src. 9
[Fri Jun  7 22:54:12 2013] Spatial fit model total counts = 43737.700000, observed total counts = 43225.000000
[Fri Jun  7 22:54:12 2013] Offset between fit and detection position for source 8 = 2.835684 pixels
[Fri Jun  7 22:54:12 2013] Warning, changing simple spatial fit ID from 3 to 8
[Fri Jun  7 22:54:12 2013] 36035.490000 total counts/ 34619.500000 bgd. counts: snr = 7.610265
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.835684 pixels
  Position = (304.0, 343.7) = 15 4 7.26 -41 51 46.6
  Extent = 8.7 (7.9-9.6)", rotation angle = 0
  Source counts = 1416.0 +/- 189.8
  Background counts = 34619.5
  Rate = 0.01 +/- 0.002
[Fri Jun  7 22:54:13 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:54:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:54:13 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 22:54:13 2013] Source does appear to be extended
[Fri Jun  7 22:54:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 08:09:42 2013] Counts = 1415.990000, rescaling region sizes by 2.000000
[Sun Jun  9 08:09:42 2013] XMMSAS src. selection expression = ellipse(26399.678000, 29855.590000, 1039.611630, 1039.611630, 0.000000, X, Y)
[Sun Jun  9 08:09:42 2013] Not overwriting source region fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_src.reg
[Sun Jun  9 08:09:42 2013] Extracting stamp from image fullrun_mos2_xmm0555630201_pi300-10000_cl_sm2.00.img.gz, (244, 284) - (364, 403)
[Sun Jun  9 08:09:42 2013] XMMSAS bgd. selection expression = annulus(26399.678000, 29855.590000, 3465.372100, 6930.744199, X, Y) && !ellipse(25836.112000, 28314.842000, 1210.808035, 1210.808035, 0.000000, X, Y) && !ellipse(27045.964000, 31360.552000, 8956.992258, 8956.992258, 0.000000, X, Y) && !ellipse(26288.816000, 28590.606000, 1182.512034, 1182.512034, 0.000000, X, Y) && !ellipse(28247.571000, 33867.589200, 942.648027, 942.648027, 0.000000, X, Y) && !ellipse(27989.514740, 35185.533569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26062.291170, 28993.936337, 1661.856048, 660.828996, 110.841880, X, Y) && !ellipse(28016.920000, 33507.062000, 1389.664040, 1389.664040, 0.000000, X, Y) && !ellipse(27396.672000, 32047.868000, 1492.832043, 1492.832043, 0.000000, X, Y) && !ellipse(29178.928000, 35220.422000, 1711.480049, 1711.480049, 0.000000, X, Y) && !ellipse(27635.591370, 34139.696289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28605.858000, 36152.982000, 9841.200283, 9841.200283, 0.000000, X, Y) && !ellipse(33823.771698, 29105.991730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28533.446400, 37275.855420, 861.824025, 861.824025, 0.000000, X, Y) && !ellipse(30079.026000, 36432.340000, 10268.880295, 10268.880295, 0.000000, X, Y) && !ellipse(29011.844000, 37103.884000, 1752.960050, 1527.440044, 149.530000, X, Y) && !ellipse(33553.900000, 41404.270200, 6475.752186, 6475.752186, 0.000000, X, Y) && !ellipse(25604.185960, 23767.953000, 961.664028, 961.664028, 0.000000, X, Y) && !ellipse(30915.928000, 36773.690000, 4317.168124, 1232.520035, 137.905000, X, Y) && !ellipse(28492.266180, 36818.256000, 1718.672049, 1718.672049, 0.000000, X, Y) && !ellipse(29375.413483, 34497.490692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24864.264400, 24217.366800, 646.736019, 646.736019, 0.000000, X, Y) && !ellipse(29116.502991, 33188.962158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32296.524000, 40765.424000, 11011.104317, 11011.104317, 0.000000, X, Y) && !ellipse(25232.958200, 21834.994400, 1283.936037, 1283.936037, 0.000000, X, Y) && !ellipse(29649.248800, 33442.305800, 427.424012, 427.424012, 0.000000, X, Y) && !ellipse(29104.054000, 32592.542000, 790.458423, 790.458423, 0.000000, X, Y) && !ellipse(25519.503815, 22485.790344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29460.849670, 34058.829407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24996.821472, 23790.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31461.016000, 40287.488000, 11700.864337, 11700.864337, 0.000000, X, Y) && !ellipse(27177.204400, 24944.492800, 321.689609, 243.492007, 359.734359, X, Y) && !ellipse(25275.908800, 22381.228000, 1367.536039, 1367.536039, 0.000000, X, Y) && !ellipse(28916.886000, 37918.770000, 1899.552055, 1899.552055, 0.000000, X, Y) && !ellipse(31821.252000, 37674.150000, 9047.040260, 9047.040260, 0.000000, X, Y) && !ellipse(25413.815000, 22086.136000, 1258.736036, 1258.736036, 0.000000, X, Y) && !ellipse(28403.673360, 27441.123000, 910.480026, 910.480026, 0.000000, X, Y) && !ellipse(27247.279680, 23370.208503, 800.556233, 347.244930, 99.596724, X, Y) && !ellipse(29749.884125, 32141.614166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28977.505800, 30336.512000, 945.640027, 945.640027, 0.000000, X, Y) && !ellipse(29825.586000, 33166.339800, 1580.472045, 1580.472045, 0.000000, X, Y) && !ellipse(27870.742004, 26673.464508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.766000, 21813.861600, 1322.784038, 1322.784038, 0.000000, X, Y) && !ellipse(29848.930000, 29201.889600, 1038.792030, 769.828822, 90.000000, X, Y) && !ellipse(33542.278000, 23096.044000, 1789.832052, 1789.832052, 0.000000, X, Y) && !ellipse(30955.663025, 34957.147949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33007.451080, 35172.030090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32566.410889, 33114.095642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29255.469879, 27969.487854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25118.801483, 27952.362915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30090.636400, 22687.332600, 988.688028, 988.688028, 0.000000, X, Y) && !ellipse(34863.289600, 25372.750000, 1627.512047, 1627.512047, 0.000000, X, Y) && !ellipse(32194.588000, 32181.360800, 1604.488046, 1436.712041, 354.874000, X, Y) && !ellipse(29334.293400, 22514.070000, 1332.192038, 1332.192038, 0.000000, X, Y) && !ellipse(33489.453064, 35404.153992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34818.056000, 24163.528000, 1613.992046, 867.816025, 90.000000, X, Y) && !ellipse(33012.174377, 34759.682800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28019.306824, 24977.957489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.007965, 22814.315704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32278.544647, 33566.294922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32815.038452, 31984.147034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32219.958771, 26623.762360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33679.064636, 23687.445984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28720.991241, 23421.167786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32078.846619, 31445.728333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33179.566010, 32480.284393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32111.312317, 22645.346985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32301.308868, 23687.116760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30879.755737, 25082.947968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32003.117218, 25807.255890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33100.855011, 24646.893921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33393.622437, 25965.662903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22254.415161, 26558.339783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31868.361206, 26195.057434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.312347, 24774.099030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.865387, 23020.566345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30585.379364, 24616.185852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31914.595886, 34598.955292, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 08:09:42 2013] Writing fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8.gif
[Sun Jun  9 08:10:06 2013] ../../xmm0555630201/products/events/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0555630201/products/events/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sun Jun  9 08:10:06 2013] Mean detx,y = (-223.86, 2024.96) 
[Sun Jun  9 08:10:06 2013] ../../xmm0555630201/products/images/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_src.img and ../../xmm0555630201/products/images/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Sun Jun  9 08:10:06 2013] ../../xmm0555630201/products/spectra/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0555630201/products/spectra/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sun Jun  9 08:10:06 2013] Setting source spectrum file to fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jun  9 08:10:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jun  9 08:10:06 2013] ../../xmm0555630201/products/lightcurves/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0555630201/products/lightcurves/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sun Jun  9 14:58:06 2013] Updating aperture counts using extracted products
[Sun Jun  9 14:58:07 2013] Total counts from fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 46169.00
[Sun Jun  9 14:58:07 2013] Total counts from fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_bgd.pi.gz = 0.00
[Sun Jun  9 14:58:07 2013] Got source and background scale factors 3081784.000000, 0.000000
[Sun Jun  9 14:58:07 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun  9 14:59:27 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 14:59:27 2013] Using photon index=1.80, rate=0.0131, arf fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8.arf
[Sun Jun  9 14:59:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 14:59:27 2013] Updating source flux to 1.4e-13
[Sun Jun  9 15:00:44 2013] Flag p found in src. 8 procflags, skipping spectral fitting
[Sun Jun  9 15:00:44 2013] Flag c found in src. 8 procflags, skipping spectral fitting
[Sun Jun  9 15:01:44 2013] xmm0555630201/analysis//spectral/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete