[Fri Jun  7 22:47:55 2013] Detection parameters:
  Position = (351.7, 178.1) = 15 3 48.64 -42 3 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1170.0 +/- 53.9
  Background counts = 380.3
  Rate = 0.02 +/- 0.001

[Fri Jun  7 22:48:08 2013] Off-axis axis estimate = 9.54'
[Fri Jun  7 22:50:21 2013] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:50:21 2013] Initial guess for spatial extent in simple fitting = 11.20"
[Fri Jun  7 22:50:21 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.952
[Fri Jun  7 22:50:21 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 11.20"
[Fri Jun  7 22:50:23 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src38.ximg exists
[Fri Jun  7 22:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src38.csv
[Fri Jun  7 22:50:23 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri Jun  7 22:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src38.csv
[Fri Jun  7 22:50:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:50:27 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri Jun  7 22:50:27 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Jun  7 22:50:27 2013] Fit fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Fri Jun  7 22:51:43 2013] Warning, spatial fit 38 centroid is now closest to src. 244
[Fri Jun  7 22:51:43 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:51:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:51:43 2013] Assessing source extent using major
[Fri Jun  7 22:51:43 2013] Source does appear to be extended
[Fri Jun  7 22:51:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:51:43 2013] Source is confused with source 71
[Fri Jun  7 22:52:52 2013] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:52:52 2013] Initial guess for spatial extent in simple fitting = 11.20"
[Fri Jun  7 22:52:52 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.952
[Fri Jun  7 22:52:52 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 11.20"
[Fri Jun  7 22:52:53 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src37.ximg exists
[Fri Jun  7 22:52:53 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Jun  7 22:52:53 2013] Fit fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src37 appears to have run properly
[Fri Jun  7 22:52:56 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Jun  7 22:52:56 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Jun  7 22:52:56 2013] Fit fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Fri Jun  7 22:54:12 2013] Warning, spatial fit 37 centroid is now closest to src. 73
[Fri Jun  7 22:54:13 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:54:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:54:13 2013] Assessing source extent using major
[Fri Jun  7 22:54:13 2013] Source does appear to be extended
[Fri Jun  7 22:54:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 08:09:49 2013] Counts = 1169.990723, rescaling region sizes by 2.000000
[Sun Jun  9 08:09:49 2013] XMMSAS src. selection expression = ellipse(30545.694641, 15446.695694, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  9 08:09:49 2013] Not overwriting source region fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_src.reg
[Sun Jun  9 08:09:49 2013] Extracting stamp from image fullrun_mos2_xmm0555630201_pi300-10000_cl_sm2.00.img.gz, (277, 103) - (427, 253)
[Sun Jun  9 08:09:49 2013] XMMSAS bgd. selection expression = annulus(30545.694641, 15446.695694, 4350.000000, 8700.000000, X, Y) && !ellipse(30131.146332, 21956.423965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.964000, 31360.552000, 8956.992258, 8956.992258, 0.000000, X, Y) && !ellipse(25604.185960, 23767.953000, 961.664028, 961.664028, 0.000000, X, Y) && !ellipse(24864.264400, 24217.366800, 646.736019, 646.736019, 0.000000, X, Y) && !ellipse(25232.958200, 21834.994400, 1283.936037, 1283.936037, 0.000000, X, Y) && !ellipse(25519.503815, 22485.790344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25454.987600, 21087.312000, 1609.040046, 1609.040046, 0.000000, X, Y) && !ellipse(24996.821472, 23790.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25275.908800, 22381.228000, 1367.536039, 1367.536039, 0.000000, X, Y) && !ellipse(34370.452850, 23543.867310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.869446, 21364.483856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25413.815000, 22086.136000, 1258.736036, 1258.736036, 0.000000, X, Y) && !ellipse(25816.847000, 19716.895500, 1448.680042, 1448.680042, 0.000000, X, Y) && !ellipse(25733.667400, 18570.799600, 871.424025, 871.424025, 0.000000, X, Y) && !ellipse(26852.646000, 19992.951200, 1427.200041, 1427.200041, 0.000000, X, Y) && !ellipse(28938.455800, 15379.428200, 1752.368050, 1752.368050, 0.000000, X, Y) && !ellipse(27247.279680, 23370.208503, 800.556233, 347.244930, 99.596724, X, Y) && !ellipse(30484.074066, 16053.311478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27844.130400, 18876.442000, 1153.464033, 1153.464033, 0.000000, X, Y) && !ellipse(40030.622192, 20469.951385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22885.226227, 18653.238297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31639.569366, 17708.235046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36989.230377, 24140.324951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.467800, 18484.438000, 1133.064033, 1133.064033, 0.000000, X, Y) && !ellipse(31549.075800, 15734.417400, 716.774421, 716.774421, 0.000000, X, Y) && !ellipse(27433.084320, 16485.875488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30720.491150, 17976.897461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36771.406464, 23708.290619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.766000, 21813.861600, 1322.784038, 1322.784038, 0.000000, X, Y) && !ellipse(31699.353200, 18108.326000, 1670.288048, 904.672026, 281.036000, X, Y) && !ellipse(24612.107727, 16914.848572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34948.609375, 22217.364227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33542.278000, 23096.044000, 1789.832052, 1789.832052, 0.000000, X, Y) && !ellipse(31122.896856, 14560.644995, 1015.165650, 646.231722, 0.000000, X, Y) && !ellipse(34326.460540, 21375.804600, 1262.312036, 1262.312036, 0.000000, X, Y) && !ellipse(29589.546906, 14415.041580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33550.420502, 16502.363220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26654.470428, 18216.110291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30090.636400, 22687.332600, 988.688028, 988.688028, 0.000000, X, Y) && !ellipse(34863.289600, 25372.750000, 1627.512047, 1627.512047, 0.000000, X, Y) && !ellipse(38857.680695, 22343.926819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30832.119202, 11793.293076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34622.311584, 23000.905853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36345.610200, 21559.462200, 1366.344039, 778.752822, 88.743000, X, Y) && !ellipse(34727.516784, 20118.318367, 1710.992049, 1593.212296, 79.500753, X, Y) && !ellipse(36812.092133, 22667.795258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29334.293400, 22514.070000, 1332.192038, 1332.192038, 0.000000, X, Y) && !ellipse(34818.056000, 24163.528000, 1613.992046, 867.816025, 90.000000, X, Y) && !ellipse(26568.266937, 16228.731918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28141.390381, 16136.516113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26311.265411, 17351.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27955.392303, 17800.057907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33551.880768, 21088.855972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28019.306824, 24977.957489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35252.283661, 23068.205536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32715.469543, 15873.785034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35642.049927, 24667.037628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35805.886475, 20481.896362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36748.233368, 24643.049438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33715.284546, 21933.975693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35928.171814, 19432.940750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.007965, 22814.315704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35820.165222, 22150.517227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31373.609772, 16553.784500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32033.562439, 17283.864456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35849.675873, 13303.731277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31266.187286, 12659.654358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27009.600000, 18316.041740, 1544.224044, 1544.224044, 0.000000, X, Y) && !ellipse(38883.354828, 24416.761292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36267.896088, 18636.904556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37713.331207, 21542.905807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33679.064636, 23687.445984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36517.317505, 19948.888611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29027.625885, 14218.261429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28720.991241, 23421.167786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29076.329742, 21993.158951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35267.669556, 20653.869247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30263.650879, 13326.399918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32111.312317, 22645.346985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31303.726746, 11363.666855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36267.282776, 14384.760971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32301.308868, 23687.116760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28975.008514, 16637.975479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30222.888214, 18398.744446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31867.771790, 14400.488037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33100.855011, 24646.893921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39361.854828, 16315.534119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28969.016113, 12214.731186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.312347, 24774.099030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.865387, 23020.566345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30585.379364, 24616.185852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32697.927765, 11592.120178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.646454, 14499.936142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32047.745605, 11445.028900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28216.870209, 11792.187256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35747.672302, 14452.557144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32084.037201, 11938.750183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33166.097046, 13259.024567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32718.453796, 12123.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33465.934814, 12311.447266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31940.532867, 12373.276260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33359.707092, 11704.798294, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 08:09:49 2013] Writing fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74.gif
[Sun Jun  9 08:10:13 2013] ../../xmm0555630201/products/events/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_src.evt and ../../xmm0555630201/products/events/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_bgd.evt exist, delete to re-create
[Sun Jun  9 08:10:13 2013] Mean detx,y = (-1257.10, -12736.66) 
[Sun Jun  9 08:10:13 2013] ../../xmm0555630201/products/images/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_src.img and ../../xmm0555630201/products/images/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_bgd.img exist, delete to re-create
[Sun Jun  9 08:10:13 2013] ../../xmm0555630201/products/spectra/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_src_b10.pi.gz and ../../xmm0555630201/products/spectra/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_bgd.pi exist, delete to re-create
[Sun Jun  9 08:10:13 2013] Setting source spectrum file to fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sun Jun  9 08:10:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Sun Jun  9 08:10:13 2013] ../../xmm0555630201/products/lightcurves/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_src.lc and ../../xmm0555630201/products/lightcurves/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_bgd.lc exist, delete to re-create
[Sun Jun  9 11:59:48 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 11:59:48 2013] rmf not generated due to insufficient counts
[Sun Jun  9 14:58:17 2013] Updating aperture counts using extracted products
[Sun Jun  9 14:58:17 2013] Total counts from fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_src_b10.pi.gz = 17896.00
[Sun Jun  9 14:58:17 2013] Total counts from fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_bgd.pi.gz = 57680.00
[Sun Jun  9 14:58:17 2013] Got source and background scale factors 5072091.000000, 58640739.000000
[Sun Jun  9 14:58:17 2013] User source parameters:
  Position = (351.7, 178.1) = 15 3 48.64 -42 3 47.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 12907.0 +/- 134.8
  Background aperture counts = 4989.0
  Rate = 0.1 +/- 0.001

[Sun Jun  9 14:58:17 2013] Updating counts from extracted products
[Sun Jun  9 14:58:17 2013] Set source signif. to 12907.01/70.63 = 182.73
[Sun Jun  9 14:59:30 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 14:59:30 2013] Using photon index=1.80, rate=0.119, arf fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74.arf
[Sun Jun  9 14:59:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 14:59:30 2013] Updating source flux to 2.3e-12
[Sun Jun  9 15:00:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 15:01:44 2013] xmm0555630201/analysis//spectral/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src74_pl.csv not found, spectral fit skipped or did not complete