[Fri Jun  7 22:47:51 2013] Detection parameters:
  Position = (318.2, 376.0) = 15 4 1.72 -41 49 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4070.7 +/- 88.3
  Background counts = 378.6
  Rate = 0.05 +/- 0.001

[Fri Jun  7 22:48:08 2013] Off-axis axis estimate = 5.80'
[Fri Jun  7 22:50:21 2013] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:50:21 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Fri Jun  7 22:50:21 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.072
[Fri Jun  7 22:50:21 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.33"
[Fri Jun  7 22:50:22 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun  7 22:50:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src15.csv
[Fri Jun  7 22:50:22 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun  7 22:50:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src15.csv
[Fri Jun  7 22:50:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:50:26 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun  7 22:50:26 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun  7 22:50:26 2013] Fit fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jun  7 22:51:43 2013] Spatial fit model total counts = 19864.000000, observed total counts = 18986.000000
[Fri Jun  7 22:51:43 2013] Offset between fit and detection position for source 21 = 6.563339 pixels
[Fri Jun  7 22:51:43 2013] Warning, changing simple spatial fit ID from 15 to 10
[Fri Jun  7 22:51:43 2013] 20572.000023 total counts/ 20572.000000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 6.563339 pixels
  Position = (318.6, 369.4) = 15 4 1.60 -41 49 54.7
  Extent = 18.6 (18.6-37.2)", rotation angle = 0
  Source counts = 0.0 +/- 143.4
  Background counts = 20572.0
  Rate = 2e-10 +/- 0.001
  Deleting source due to low Poisson probability