[Fri Jun  7 22:47:50 2013] Detection parameters:
  Position = (355.0, 463.9) = 15 3 47.45 -41 43 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2356.0 +/- 70.0
  Background counts = 308.7
  Rate = 0.02 +/- 0.0006

[Fri Jun  7 22:48:08 2013] Off-axis axis estimate = 12.68'
[Fri Jun  7 22:50:21 2013] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:50:21 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Fri Jun  7 22:50:21 2013] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.890
[Fri Jun  7 22:50:21 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 12.77"
[Fri Jun  7 22:50:23 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src36.ximg exists
[Fri Jun  7 22:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src36.csv
[Fri Jun  7 22:50:23 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src36_1.ximg exists
[Fri Jun  7 22:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src36.csv
[Fri Jun  7 22:50:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:50:27 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Fri Jun  7 22:50:27 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Fri Jun  7 22:50:27 2013] Fit fullrun_mos2_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Jun  7 22:51:43 2013] Warning, spatial fit 36 centroid is now closest to src. 29
[Fri Jun  7 22:51:43 2013] Spatial fit model total counts = 15210.400000, observed total counts = 15216.000000
[Fri Jun  7 22:51:43 2013] Offset between fit and detection position for source 2 = 4.805182 pixels
[Fri Jun  7 22:51:43 2013] Warning, changing simple spatial fit ID from 36 to 39
[Fri Jun  7 22:51:43 2013] 15033.900000 total counts/ 13254.000000 bgd. counts: snr = 15.460450
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.805182 pixels
  Position = (358.6, 460.7) = 15 3 46.05 -41 43 17.5
  Extent = 22.9 (19.2-24.8)", rotation angle = 0
  Source counts = 1779.9 +/- 122.6
  Background counts = 13254.0
  Rate = 0.02 +/- 0.001
[Fri Jun  7 22:51:43 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:51:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:51:43 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 22:51:43 2013] Source does appear to be extended
[Fri Jun  7 22:51:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:51:43 2013] Source is confused with source 3
[Fri Jun  7 22:52:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:52:52 2013] Initial guess for spatial extent in simple fitting = 22.94"
[Fri Jun  7 22:52:52 2013] source mask rpix=5.3, npix_max = 133, mask sum = 121, frac = 0.907
[Fri Jun  7 22:52:52 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 22.94"
[Fri Jun  7 22:52:53 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src35.ximg exists
[Fri Jun  7 22:52:53 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri Jun  7 22:52:53 2013] Fit fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_src35 appears to have run properly
[Fri Jun  7 22:52:56 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri Jun  7 22:52:56 2013] fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Jun  7 22:52:56 2013] Fit fullrun_mos2_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Fri Jun  7 22:54:12 2013] Warning, spatial fit 35 centroid is now closest to src. 3
[Fri Jun  7 22:54:12 2013] Spatial fit model total counts = 50598.600000, observed total counts = 50603.000000
[Fri Jun  7 22:54:12 2013] Offset between fit and detection position for source 2 = 4.606932 pixels
[Fri Jun  7 22:54:12 2013] Warning, changing simple spatial fit ID from 35 to 38
[Fri Jun  7 22:54:12 2013] 48660.600000 total counts/ 19419.700000 bgd. counts: snr = 209.830916
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.606932 pixels
  Position = (362.2, 463.6) = 15 3 44.67 -41 43 4.8
  Extent = 48.8 (48.7-97.5)", rotation angle = 0
  Source counts = 29240.9 +/- 220.6
  Background counts = 19419.7
  Rate = 0.3 +/- 0.002
[Fri Jun  7 22:54:13 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:54:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:54:13 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 22:54:13 2013] Source does appear to be extended
[Fri Jun  7 22:54:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 08:09:49 2013] Counts = 29240.900000, rescaling region sizes by 3.000000
[Sun Jun  9 08:09:49 2013] XMMSAS src. selection expression = ellipse(31461.016000, 40287.488000, 8775.648253, 8775.648253, 0.000000, X, Y)
[Sun Jun  9 08:09:49 2013] Not overwriting source region fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun  9 08:09:49 2013] Extracting stamp from image fullrun_mos2_xmm0555630201_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (595, 595)
[Sun Jun  9 08:09:49 2013] XMMSAS bgd. selection expression = annulus(31461.016000, 40287.488000, 43878.241263, 87756.482525, X, Y) && !ellipse(30131.146332, 21956.423965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.112000, 28314.842000, 1210.808035, 1210.808035, 0.000000, X, Y) && !ellipse(26399.678000, 29855.590000, 693.074420, 693.074420, 0.000000, X, Y) && !ellipse(27045.964000, 31360.552000, 8956.992258, 8956.992258, 0.000000, X, Y) && !ellipse(26288.816000, 28590.606000, 1182.512034, 1182.512034, 0.000000, X, Y) && !ellipse(28247.571000, 33867.589200, 942.648027, 942.648027, 0.000000, X, Y) && !ellipse(27989.514740, 35185.533569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26062.291170, 28993.936337, 1661.856048, 660.828996, 110.841880, X, Y) && !ellipse(28016.920000, 33507.062000, 1389.664040, 1389.664040, 0.000000, X, Y) && !ellipse(27396.672000, 32047.868000, 1492.832043, 1492.832043, 0.000000, X, Y) && !ellipse(29178.928000, 35220.422000, 1711.480049, 1711.480049, 0.000000, X, Y) && !ellipse(27635.591370, 34139.696289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28605.858000, 36152.982000, 9841.200283, 9841.200283, 0.000000, X, Y) && !ellipse(33823.771698, 29105.991730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28533.446400, 37275.855420, 861.824025, 861.824025, 0.000000, X, Y) && !ellipse(30079.026000, 36432.340000, 10268.880295, 10268.880295, 0.000000, X, Y) && !ellipse(29011.844000, 37103.884000, 1752.960050, 1527.440044, 149.530000, X, Y) && !ellipse(33553.900000, 41404.270200, 6475.752186, 6475.752186, 0.000000, X, Y) && !ellipse(25604.185960, 23767.953000, 961.664028, 961.664028, 0.000000, X, Y) && !ellipse(30915.928000, 36773.690000, 4317.168124, 1232.520035, 137.905000, X, Y) && !ellipse(28492.266180, 36818.256000, 1718.672049, 1718.672049, 0.000000, X, Y) && !ellipse(29375.413483, 34497.490692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30068.259308, 37969.172485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24864.264400, 24217.366800, 646.736019, 646.736019, 0.000000, X, Y) && !ellipse(31034.039490, 37882.815002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29116.502991, 33188.962158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32296.524000, 40765.424000, 11011.104317, 11011.104317, 0.000000, X, Y) && !ellipse(25232.958200, 21834.994400, 1283.936037, 1283.936037, 0.000000, X, Y) && !ellipse(29649.248800, 33442.305800, 427.424012, 427.424012, 0.000000, X, Y) && !ellipse(29104.054000, 32592.542000, 790.458423, 790.458423, 0.000000, X, Y) && !ellipse(25519.503815, 22485.790344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29460.849670, 34058.829407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25454.987600, 21087.312000, 1609.040046, 1609.040046, 0.000000, X, Y) && !ellipse(24996.821472, 23790.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27177.204400, 24944.492800, 321.689609, 243.492007, 359.734359, X, Y) && !ellipse(30545.694641, 15446.695694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30494.244000, 39516.252000, 1950.144056, 1950.144056, 0.000000, X, Y) && !ellipse(25275.908800, 22381.228000, 1367.536039, 1367.536039, 0.000000, X, Y) && !ellipse(34370.452850, 23543.867310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28916.886000, 37918.770000, 1899.552055, 1899.552055, 0.000000, X, Y) && !ellipse(31821.252000, 37674.150000, 9047.040260, 9047.040260, 0.000000, X, Y) && !ellipse(26391.869446, 21364.483856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25413.815000, 22086.136000, 1258.736036, 1258.736036, 0.000000, X, Y) && !ellipse(34786.648600, 41576.802400, 1333.632038, 582.724017, -0.000000, X, Y) && !ellipse(25816.847000, 19716.895500, 1448.680042, 1448.680042, 0.000000, X, Y) && !ellipse(30179.056000, 38895.268000, 1898.464055, 1898.464055, 0.000000, X, Y) && !ellipse(25733.667400, 18570.799600, 871.424025, 871.424025, 0.000000, X, Y) && !ellipse(28403.673360, 27441.123000, 910.480026, 910.480026, 0.000000, X, Y) && !ellipse(26852.646000, 19992.951200, 1427.200041, 1427.200041, 0.000000, X, Y) && !ellipse(28938.455800, 15379.428200, 1752.368050, 1752.368050, 0.000000, X, Y) && !ellipse(27247.279680, 23370.208503, 800.556233, 347.244930, 99.596724, X, Y) && !ellipse(29749.884125, 32141.614166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30484.074066, 16053.311478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30860.217377, 38840.632751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29964.328186, 38319.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28977.505800, 30336.512000, 945.640027, 945.640027, 0.000000, X, Y) && !ellipse(27844.130400, 18876.442000, 1153.464033, 1153.464033, 0.000000, X, Y) && !ellipse(29825.586000, 33166.339800, 1580.472045, 1580.472045, 0.000000, X, Y) && !ellipse(40030.622192, 20469.951385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22885.226227, 18653.238297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35839.618622, 41695.808777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31639.569366, 17708.235046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27870.742004, 26673.464508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36989.230377, 24140.324951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.467800, 18484.438000, 1133.064033, 1133.064033, 0.000000, X, Y) && !ellipse(31549.075800, 15734.417400, 716.774421, 716.774421, 0.000000, X, Y) && !ellipse(27433.084320, 16485.875488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30720.491150, 17976.897461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29568.800507, 39273.739716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36771.406464, 23708.290619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.766000, 21813.861600, 1322.784038, 1322.784038, 0.000000, X, Y) && !ellipse(31699.353200, 18108.326000, 1670.288048, 904.672026, 281.036000, X, Y) && !ellipse(24612.107727, 16914.848572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29848.930000, 29201.889600, 1038.792030, 769.828822, 90.000000, X, Y) && !ellipse(34948.609375, 22217.364227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34994.331000, 26564.246800, 986.288028, 986.288028, 0.000000, X, Y) && !ellipse(33542.278000, 23096.044000, 1789.832052, 1789.832052, 0.000000, X, Y) && !ellipse(30955.663025, 34957.147949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33007.451080, 35172.030090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38843.476288, 28472.862823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34896.326538, 25674.108826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32566.410889, 33114.095642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29255.469879, 27969.487854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31122.896856, 14560.644995, 1015.165650, 646.231722, 0.000000, X, Y) && !ellipse(34326.460540, 21375.804600, 1262.312036, 1262.312036, 0.000000, X, Y) && !ellipse(29589.546906, 14415.041580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33550.420502, 16502.363220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25118.801483, 27952.362915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26654.470428, 18216.110291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30090.636400, 22687.332600, 988.688028, 988.688028, 0.000000, X, Y) && !ellipse(34863.289600, 25372.750000, 1627.512047, 1627.512047, 0.000000, X, Y) && !ellipse(38857.680695, 22343.926819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30832.119202, 11793.293076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32194.588000, 32181.360800, 1604.488046, 1436.712041, 354.874000, X, Y) && !ellipse(34622.311584, 23000.905853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36345.610200, 21559.462200, 1366.344039, 778.752822, 88.743000, X, Y) && !ellipse(34727.516784, 20118.318367, 1710.992049, 1593.212296, 79.500753, X, Y) && !ellipse(36812.092133, 22667.795258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29334.293400, 22514.070000, 1332.192038, 1332.192038, 0.000000, X, Y) && !ellipse(33489.453064, 35404.153992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34818.056000, 24163.528000, 1613.992046, 867.816025, 90.000000, X, Y) && !ellipse(26568.266937, 16228.731918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33012.174377, 34759.682800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28141.390381, 16136.516113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26311.265411, 17351.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27955.392303, 17800.057907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33551.880768, 21088.855972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28019.306824, 24977.957489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35252.283661, 23068.205536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32715.469543, 15873.785034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36139.469666, 25182.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35642.049927, 24667.037628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35805.886475, 20481.896362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36748.233368, 24643.049438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33715.284546, 21933.975693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35928.171814, 19432.940750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35622.729279, 25855.160583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.007965, 22814.315704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35820.165222, 22150.517227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37642.768494, 31789.790924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31373.609772, 16553.784500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32033.562439, 17283.864456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32278.544647, 33566.294922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35849.675873, 13303.731277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31266.187286, 12659.654358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27009.600000, 18316.041740, 1544.224044, 1544.224044, 0.000000, X, Y) && !ellipse(32815.038452, 31984.147034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.878113, 31611.468536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38883.354828, 24416.761292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36267.896088, 18636.904556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32219.958771, 26623.762360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37713.331207, 21542.905807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33679.064636, 23687.445984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36517.317505, 19948.888611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35431.426453, 40081.235016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34853.646942, 39739.962860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29027.625885, 14218.261429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28720.991241, 23421.167786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29076.329742, 21993.158951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35267.669556, 20653.869247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18511.576553, 17522.888779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32078.846619, 31445.728333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33179.566010, 32480.284393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30263.650879, 13326.399918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34587.846649, 29255.663696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35162.254272, 42109.311005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32111.312317, 22645.346985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31303.726746, 11363.666855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37398.542969, 25094.627441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36267.282776, 14384.760971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32301.308868, 23687.116760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28975.008514, 16637.975479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43188.429077, 26142.291382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43100.929932, 27086.966736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36144.944336, 26955.001160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30222.888214, 18398.744446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30879.755737, 25082.947968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31867.771790, 14400.488037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32003.117218, 25807.255890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33100.855011, 24646.893921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39361.854828, 16315.534119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33393.622437, 25965.662903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37124.315613, 40768.760162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28969.016113, 12214.731186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13333.346802, 34924.732697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22254.415161, 26558.339783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31868.361206, 26195.057434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42490.952881, 26581.802277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.312347, 24774.099030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.865387, 23020.566345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30585.379364, 24616.185852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32697.927765, 11592.120178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42466.218628, 32005.275757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.646454, 14499.936142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32047.745605, 11445.028900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28216.870209, 11792.187256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35747.672302, 14452.557144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40776.393372, 30670.528809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32084.037201, 11938.750183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31914.595886, 34598.955292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33166.097046, 13259.024567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42516.595154, 32729.910248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32718.453796, 12123.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37245.560181, 31016.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33465.934814, 12311.447266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37180.692505, 30272.770905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37782.048676, 31072.988770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33958.392303, 39344.716614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41618.961609, 28214.082428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31940.532867, 12373.276260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41178.712616, 30500.073273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33359.707092, 11704.798294, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 08:09:49 2013] Writing fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2.gif
[Sun Jun  9 08:10:12 2013] ../../xmm0555630201/products/events/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0555630201/products/events/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Jun  9 08:10:13 2013] Mean detx,y = (-6202.73, 7946.83) 
[Sun Jun  9 08:10:13 2013] ../../xmm0555630201/products/images/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_src.img and ../../xmm0555630201/products/images/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Jun  9 08:10:13 2013] ../../xmm0555630201/products/spectra/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0555630201/products/spectra/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Jun  9 08:10:13 2013] Setting source spectrum file to fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun  9 08:10:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun  9 08:10:13 2013] ../../xmm0555630201/products/lightcurves/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0555630201/products/lightcurves/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Jun  9 14:58:17 2013] Updating aperture counts using extracted products
[Sun Jun  9 14:58:17 2013] Total counts from fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 478699.00
[Sun Jun  9 14:58:17 2013] Total counts from fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 0.00
[Sun Jun  9 14:58:17 2013] Got source and background scale factors 152212500.000000, 0.000000
[Sun Jun  9 14:58:17 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun  9 14:59:29 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 14:59:29 2013] Using photon index=1.80, rate=0.27, arf fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2.arf
[Sun Jun  9 14:59:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 14:59:30 2013] Updating source flux to 5.2e-12
[Sun Jun  9 15:00:44 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun Jun  9 15:01:44 2013] xmm0555630201/analysis//spectral/fullrun_mos2_xmm0555630201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete