[Fri Jun 7 22:47:39 2013] Detection parameters: Position = (313.7, 268.9) = 15 4 3.47 -41 57 11.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1330.4 +/- 57.7 Background counts = 452.5 Rate = 0.01 +/- 0.0006 [Fri Jun 7 22:47:49 2013] Off-axis axis estimate = 2.41' [Fri Jun 7 22:50:15 2013] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting [Fri Jun 7 22:50:15 2013] Initial guess for spatial extent in simple fitting = 7.63" [Fri Jun 7 22:50:15 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.984 [Fri Jun 7 22:50:15 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 7.63" [Fri Jun 7 22:50:18 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src58.ximg exists [Fri Jun 7 22:50:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src58.csv [Fri Jun 7 22:50:18 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src58_1.ximg exists [Fri Jun 7 22:50:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src58.csv [Fri Jun 7 22:50:18 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src58_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 22:50:20 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src58.ximg exists [Fri Jun 7 22:50:20 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists [Fri Jun 7 22:50:20 2013] Fit fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly [Fri Jun 7 22:51:25 2013] Source 69 is offset by 7.738417 and -5.553748 pixels which is larger than 2 X fitted extent = 7.018759 x 7.018759, not incorporating fit results [Fri Jun 7 22:51:25 2013] Spatial fit model total counts = 11005.400000, observed total counts = 11002.000000 [Fri Jun 7 22:51:25 2013] Offset between fit and detection position for source 69 = 0.773601 pixels [Fri Jun 7 22:51:25 2013] Warning, changing simple spatial fit ID from 58 to 71 [Fri Jun 7 22:51:25 2013] 10870.348000 total counts/ 10390.800000 bgd. counts: snr = 4.704436 Spatial fit parameters: Offset between fit and detection position for source 69 = 0.773601 pixels Position = (314.5, 268.8) = 15 4 3.17 -41 57 12.5 Extent = 9.7 (6.8-15.8)", rotation angle = 0 Source counts = 479.5 +/- 104.3 Background counts = 10390.8 Rate = 0.004 +/- 0.001 [Fri Jun 7 22:51:26 2013] Vigneting correction estimate = 1.000000 [Fri Jun 7 22:51:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 7 22:51:26 2013] Assessing source extent using major axis lower bound [Fri Jun 7 22:51:26 2013] Source does appear to be extended [Fri Jun 7 22:51:26 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 7 22:51:26 2013] Source is confused with source 71 [Fri Jun 7 22:52:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri Jun 7 22:52:42 2013] Initial guess for spatial extent in simple fitting = 9.74" [Fri Jun 7 22:52:42 2013] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 1.000 [Fri Jun 7 22:52:42 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 9.74" [Fri Jun 7 22:52:47 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src56.ximg exists [Fri Jun 7 22:52:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src56.csv [Fri Jun 7 22:52:47 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src56_1.ximg exists [Fri Jun 7 22:52:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src56.csv [Fri Jun 7 22:52:47 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src56_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 22:52:51 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src56.ximg exists [Fri Jun 7 22:52:51 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists [Fri Jun 7 22:52:51 2013] Fit fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly [Fri Jun 7 22:53:51 2013] Warning, spatial fit 56 centroid is now closest to src. 73 [Fri Jun 7 22:53:51 2013] Spatial fit model total counts = 11004.100000, observed total counts = 11002.000000 [Fri Jun 7 22:53:51 2013] Offset between fit and detection position for source 69 = 0.058344 pixels [Fri Jun 7 22:53:51 2013] Warning, changing simple spatial fit ID from 56 to 68 [Fri Jun 7 22:53:51 2013] 10844.746000 total counts/ 10373.400000 bgd. counts: snr = 4.627850 Spatial fit parameters: Offset between fit and detection position for source 69 = 0.058344 pixels Position = (314.5, 268.7) = 15 4 3.17 -41 57 12.7 Extent = 9.5 (6.7-15.8)", rotation angle = 0 Source counts = 471.3 +/- 104.1 Background counts = 10373.4 Rate = 0.004 +/- 0.001 [Fri Jun 7 22:53:52 2013] Vigneting correction estimate = 1.000000 [Fri Jun 7 22:53:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 7 22:53:52 2013] Assessing source extent using major axis lower bound [Fri Jun 7 22:53:52 2013] Source does appear to be extended [Fri Jun 7 22:53:52 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 07:41:15 2013] XMMSAS src. selection expression = ellipse(27312.944200, 23332.388000, 571.848616, 571.848616, 0.000000, X, Y) [Sun Jun 9 07:41:15 2013] Not overwriting source region fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_src.reg [Sun Jun 9 07:41:15 2013] Extracting stamp from image fullrun_mos1_xmm0555630201_pi300-10000_cl_sm2.00.img.gz, (282, 236) - (347, 302) [Sun Jun 9 07:41:15 2013] XMMSAS bgd. selection expression = annulus(27312.944200, 23332.388000, 953.081027, 1906.162055, X, Y) && !ellipse(25870.813400, 28171.024000, 3462.024100, 3462.024100, 0.000000, X, Y) && !ellipse(26038.594000, 28609.354000, 3657.552105, 3657.552105, 0.000000, X, Y) && !ellipse(26527.544388, 30090.765349, 5636.976162, 2228.296196, 117.875075, X, Y) && !ellipse(25949.305380, 28564.130186, 5636.976162, 2046.290782, 111.337412, X, Y) && !ellipse(25281.886000, 25612.970000, 1765.832051, 1003.768029, 90.000000, X, Y) && !ellipse(27390.564800, 32621.174000, 8708.952251, 8708.952251, 0.000000, X, Y) && !ellipse(25635.974400, 23702.379400, 817.096024, 817.096024, 0.000000, X, Y) && !ellipse(28790.832000, 34625.686000, 10119.744291, 10119.744291, 0.000000, X, Y) && !ellipse(24897.608600, 24536.740000, 734.906421, 734.906421, 0.000000, X, Y) && !ellipse(24917.864100, 23695.784800, 718.307221, 718.307221, 0.000000, X, Y) && !ellipse(25831.570000, 21171.592000, 615.291218, 615.291218, 0.000000, X, Y) && !ellipse(25388.394800, 22084.610000, 1264.680036, 1264.680036, 0.000000, X, Y) && !ellipse(25521.418091, 22395.365356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.872000, 24686.437800, 866.632025, 866.632025, 0.000000, X, Y) && !ellipse(27182.820468, 24939.530200, 307.704009, 307.704009, 0.000000, X, Y) && !ellipse(26396.266174, 21353.192017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25320.314000, 20892.668000, 1344.960039, 1344.960039, 359.910000, X, Y) && !ellipse(27521.629547, 21670.858307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27524.722000, 22627.906000, 1032.440030, 1032.440030, 0.000000, X, Y) && !ellipse(29056.212000, 27623.748400, 2451.056071, 2451.056071, 0.000000, X, Y) && !ellipse(29334.937561, 22543.916901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28466.238000, 21603.778000, 1368.072039, 1368.072039, 0.000000, X, Y) [Sun Jun 9 07:41:15 2013] Writing fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69.gif [Sun Jun 9 07:41:32 2013] ../../xmm0555630201/products/events/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_src.evt and ../../xmm0555630201/products/events/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_bgd.evt exist, delete to re-create [Sun Jun 9 07:41:32 2013] Mean detx,y = (-4232.66, -565.76) [Sun Jun 9 07:41:32 2013] ../../xmm0555630201/products/images/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_src.img and ../../xmm0555630201/products/images/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_bgd.img exist, delete to re-create [Sun Jun 9 07:41:32 2013] ../../xmm0555630201/products/spectra/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_src_b10.pi.gz and ../../xmm0555630201/products/spectra/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_bgd.pi exist, delete to re-create [Sun Jun 9 07:41:32 2013] Setting source spectrum file to fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_src_b10.pi.gz [Sun Jun 9 07:41:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_bgd.pi.gz [Sun Jun 9 07:41:32 2013] ../../xmm0555630201/products/lightcurves/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_src.lc and ../../xmm0555630201/products/lightcurves/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_bgd.lc exist, delete to re-create [Sun Jun 9 07:42:19 2013] fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69.rmf exists, delete to re-create [Sun Jun 9 07:42:19 2013] fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69.arf exists, delete to re-create [Sun Jun 9 14:57:28 2013] Updating aperture counts using extracted products [Sun Jun 9 14:57:28 2013] Total counts from fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_src_b10.pi.gz = 6181.00 [Sun Jun 9 14:57:28 2013] Total counts from fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_bgd.pi.gz = 2837.00 [Sun Jun 9 14:57:28 2013] Got source and background scale factors 1033600.000000, 715200.000000 [Sun Jun 9 14:57:28 2013] User source parameters: Position = (314.5, 268.7) = 15 4 3.17 -41 57 12.7 Extent = 9.5 (6.7-15.8)", rotation angle = 0 Source aperture counts = 2081.0 +/- 79.6 Background aperture counts = 4100.0 Rate = 0.02 +/- 0.0007 [Sun Jun 9 14:57:58 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 14:57:58 2013] Using photon index=1.80, rate=0.00434, arf fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69.arf [Sun Jun 9 14:57:58 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 14:57:58 2013] Updating source flux to 5.3e-14 [Sun Jun 9 14:59:50 2013] Flag b found in src. 69 procflags, skipping spectral fitting [Sun Jun 9 14:59:50 2013] Flag c found in src. 69 procflags, skipping spectral fitting [Sun Jun 9 15:00:44 2013] xmm0555630201/analysis//spectral/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src69_pl.csv not found, spectral fit skipped or did not complete