[Fri Jun  7 22:47:39 2013] Detection parameters:
  Position = (417.9, 273.0) = 15 3 22.84 -41 56 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 733.9 +/- 45.5
  Background counts = 361.6
  Rate = 0.01 +/- 0.0007

[Fri Jun  7 22:47:49 2013] Off-axis axis estimate = 8.86'
[Fri Jun  7 22:50:15 2013] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:50:15 2013] Initial guess for spatial extent in simple fitting = 10.86"
[Fri Jun  7 22:50:15 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.003
[Fri Jun  7 22:50:15 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 10.86"
[Fri Jun  7 22:50:18 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src67.ximg exists
[Fri Jun  7 22:50:18 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src67_1.ximg exists
[Fri Jun  7 22:50:18 2013] Fit fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src67 appears to have run properly
[Fri Jun  7 22:50:20 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Fri Jun  7 22:50:20 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Fri Jun  7 22:50:20 2013] Fit fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Fri Jun  7 22:51:25 2013] Spatial fit model total counts = 7450.020000, observed total counts = 7442.000000
[Fri Jun  7 22:51:25 2013] Offset between fit and detection position for source 68 = 0.785806 pixels
[Fri Jun  7 22:51:25 2013] 7417.048000 total counts/ 6720.710000 bgd. counts: snr = 8.494005
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.785806 pixels
  Position = (417.1, 273.0) = 15 3 23.15 -41 56 53.7
  Extent = 12.3 (9.8-17.9)", rotation angle = 0
  Source counts = 696.3 +/- 86.1
  Background counts = 6720.7
  Rate = 0.006 +/- 0.0008
[Fri Jun  7 22:51:26 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:51:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:51:26 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 22:51:26 2013] Source does appear to be extended
[Fri Jun  7 22:51:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:51:26 2013] Source is confused with source 67
[Fri Jun  7 22:51:26 2013] Source is confused with source 192
[Fri Jun  7 22:52:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:52:42 2013] Initial guess for spatial extent in simple fitting = 12.28"
[Fri Jun  7 22:52:42 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.815
[Fri Jun  7 22:52:42 2013] Giving source the simple spatial ID 64 for pass 1, mean size = 12.28"
[Fri Jun  7 22:52:47 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src64.ximg exists
[Fri Jun  7 22:52:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src64.csv
[Fri Jun  7 22:52:47 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src64_1.ximg exists
[Fri Jun  7 22:52:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src64.csv
[Fri Jun  7 22:52:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:52:51 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Fri Jun  7 22:52:51 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Fri Jun  7 22:52:51 2013] Fit fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Fri Jun  7 22:53:51 2013] Warning, spatial fit 64 centroid is now closest to src. 193
[Fri Jun  7 22:53:52 2013] Spatial fit model total counts = 6917.080000, observed total counts = 6902.000000
[Fri Jun  7 22:53:52 2013] Offset between fit and detection position for source 68 = 0.811159 pixels
[Fri Jun  7 22:53:52 2013] Warning, changing simple spatial fit ID from 64 to 87
[Fri Jun  7 22:53:52 2013] 6837.603000 total counts/ 6455.720000 bgd. counts: snr = 4.752892
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.811159 pixels
  Position = (417.8, 273.5) = 15 3 22.91 -41 56 51.4
  Extent = 11.6 (11.5-11.6)", rotation angle = 0
  Source counts = 381.9 +/- 82.7
  Background counts = 6455.7
  Rate = 0.004 +/- 0.0008
[Fri Jun  7 22:53:52 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:53:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:53:52 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 22:53:52 2013] Source does appear to be extended
[Fri Jun  7 22:53:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 07:41:16 2013] XMMSAS src. selection expression = ellipse(36296.070800, 23747.728000, 694.194020, 694.194020, 0.000000, X, Y)
[Sun Jun  9 07:41:16 2013] Not overwriting source region fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_src.reg
[Sun Jun  9 07:41:16 2013] Extracting stamp from image fullrun_mos1_xmm0555630201_pi300-10000_cl_sm2.00.img.gz, (378, 234) - (458, 313)
[Sun Jun  9 07:41:16 2013] XMMSAS bgd. selection expression = annulus(36296.070800, 23747.728000, 1156.990033, 2313.980067, X, Y) && !ellipse(27390.564800, 32621.174000, 8708.952251, 8708.952251, 0.000000, X, Y) && !ellipse(28790.832000, 34625.686000, 10119.744291, 10119.744291, 0.000000, X, Y) && !ellipse(36771.236542, 22821.776337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36824.449400, 23560.812000, 2234.248064, 2234.248064, 0.000000, X, Y) && !ellipse(35269.328949, 24727.423615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34704.874000, 25618.560000, 1421.024041, 1421.024041, 0.000000, X, Y) && !ellipse(34970.136353, 26491.186127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35159.214264, 25259.738403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35091.601288, 24060.416534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35860.278000, 25692.330000, 1716.088049, 1716.088049, 0.000000, X, Y) && !ellipse(33713.927826, 23346.149933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36550.254000, 24801.392000, 1716.088049, 1716.088049, 0.000000, X, Y) && !ellipse(37703.199615, 21625.681656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36166.657166, 23008.711639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34958.278000, 22499.070000, 1177.424034, 1177.424034, 0.000000, X, Y) && !ellipse(33937.930000, 22736.888000, 1575.960045, 1575.960045, 0.000000, X, Y) && !ellipse(35711.279816, 20661.396255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37537.884216, 24933.963654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35836.658264, 22146.048813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.035126, 23439.771576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35573.890015, 25182.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38466.101044, 23194.080475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33407.582000, 23997.490000, 1575.960045, 1575.960045, 0.000000, X, Y) && !ellipse(35766.937195, 22751.088837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38925.227295, 24317.136627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36277.220551, 22318.863342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38902.048889, 23524.079376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38860.641052, 22410.400787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33253.691772, 22527.490234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35022.209442, 21349.510818, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 07:41:16 2013] Writing fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68.gif
[Sun Jun  9 07:41:34 2013] ../../xmm0555630201/products/events/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_src.evt and ../../xmm0555630201/products/events/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_bgd.evt exist, delete to re-create
[Sun Jun  9 07:41:34 2013] Mean detx,y = (-5751.67, 8356.25) 
[Sun Jun  9 07:41:34 2013] ../../xmm0555630201/products/images/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_src.img and ../../xmm0555630201/products/images/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_bgd.img exist, delete to re-create
[Sun Jun  9 07:41:34 2013] ../../xmm0555630201/products/spectra/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_src_b10.pi.gz and ../../xmm0555630201/products/spectra/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_bgd.pi exist, delete to re-create
[Sun Jun  9 07:41:34 2013] Setting source spectrum file to fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sun Jun  9 07:41:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sun Jun  9 07:41:34 2013] ../../xmm0555630201/products/lightcurves/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_src.lc and ../../xmm0555630201/products/lightcurves/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_bgd.lc exist, delete to re-create
[Sun Jun  9 07:42:19 2013] fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68.rmf exists, delete to re-create
[Sun Jun  9 07:42:19 2013] fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68.arf exists, delete to re-create
[Sun Jun  9 14:57:30 2013] Updating aperture counts using extracted products
[Sun Jun  9 14:57:30 2013] Total counts from fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_src_b10.pi.gz = 5996.00
[Sun Jun  9 14:57:30 2013] Total counts from fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_bgd.pi.gz = 0.00
[Sun Jun  9 14:57:31 2013] Got source and background scale factors 1461288.000000, 0.000000
[Sun Jun  9 14:57:31 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun  9 14:57:59 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 14:57:59 2013] Using photon index=1.80, rate=0.00352, arf fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68.arf
[Sun Jun  9 14:57:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 14:57:59 2013] Updating source flux to 5.6e-14
[Sun Jun  9 14:59:50 2013] Flag c found in src. 68 procflags, skipping spectral fitting
[Sun Jun  9 15:00:44 2013] xmm0555630201/analysis//spectral/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete