[Fri Jun  7 22:47:39 2013] Detection parameters:
  Position = (426.0, 277.9) = 15 3 19.70 -41 56 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 897.1 +/- 47.3
  Background counts = 331.6
  Rate = 0.01 +/- 0.0007

[Fri Jun  7 22:47:49 2013] Off-axis axis estimate = 9.37'
[Fri Jun  7 22:50:15 2013] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:50:15 2013] Initial guess for spatial extent in simple fitting = 11.11"
[Fri Jun  7 22:50:15 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.965
[Fri Jun  7 22:50:15 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 11.11"
[Fri Jun  7 22:50:18 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src61.ximg exists
[Fri Jun  7 22:50:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src61.csv
[Fri Jun  7 22:50:18 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src61_1.ximg exists
[Fri Jun  7 22:50:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src61.csv
[Fri Jun  7 22:50:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:50:20 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Fri Jun  7 22:50:20 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Fri Jun  7 22:50:20 2013] Fit fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Fri Jun  7 22:51:25 2013] Spatial fit model total counts = 7391.190000, observed total counts = 7398.000000
[Fri Jun  7 22:51:25 2013] Offset between fit and detection position for source 65 = 7.886032 pixels
[Fri Jun  7 22:51:25 2013] Warning, changing simple spatial fit ID from 61 to 60
[Fri Jun  7 22:51:25 2013] 7269.000015 total counts/ 7269.000000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 7.886032 pixels
  Position = (433.0, 274.2) = 15 3 16.97 -41 56 48.1
  Extent = 22.3 (22.2-44.5)", rotation angle = 0
  Source counts = 0.0 +/- 85.3
  Background counts = 7269.0
  Rate = 1e-10 +/- 0.0008
  Deleting source due to low Poisson probability