[Fri Jun  7 22:47:38 2013] Detection parameters:
  Position = (386.7, 376.3) = 15 3 35.08 -41 49 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2328.9 +/- 275.6
  Background counts = 304.4
  Rate = 0.04 +/- 0.004

[Fri Jun  7 22:47:49 2013] Off-axis axis estimate = 8.53'
[Fri Jun  7 22:50:15 2013] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:50:15 2013] Initial guess for spatial extent in simple fitting = 10.70"
[Fri Jun  7 22:50:15 2013] source mask rpix=2.5, npix_max = 35, mask sum = 21, frac = 0.600
[Fri Jun  7 22:50:15 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 10.70"
[Fri Jun  7 22:50:16 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jun  7 22:50:16 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src21.csv
[Fri Jun  7 22:50:16 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jun  7 22:50:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src21.csv
[Fri Jun  7 22:50:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:50:19 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jun  7 22:50:19 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jun  7 22:50:19 2013] Fit fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Jun  7 22:51:25 2013] Warning, spatial fit 21 centroid is now closest to src. 133
[Fri Jun  7 22:51:26 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:51:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:51:26 2013] Assessing source extent using major
[Fri Jun  7 22:51:26 2013] Source does appear to be extended
[Fri Jun  7 22:51:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:51:26 2013] Source is confused with source 51
[Fri Jun  7 22:51:26 2013] Source is confused with source 130
[Fri Jun  7 22:52:42 2013] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:52:42 2013] Initial guess for spatial extent in simple fitting = 10.70"
[Fri Jun  7 22:52:42 2013] source mask rpix=2.5, npix_max = 35, mask sum = 21, frac = 0.600
[Fri Jun  7 22:52:42 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 10.70"
[Fri Jun  7 22:52:45 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src20.ximg exists
[Fri Jun  7 22:52:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src20.csv
[Fri Jun  7 22:52:45 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Jun  7 22:52:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src20.csv
[Fri Jun  7 22:52:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:52:50 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Jun  7 22:52:50 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Jun  7 22:52:50 2013] Fit fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Jun  7 22:53:51 2013] Warning, spatial fit 20 centroid is now closest to src. 130
[Fri Jun  7 22:53:52 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:53:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:53:52 2013] Assessing source extent using major
[Fri Jun  7 22:53:52 2013] Source does appear to be extended
[Fri Jun  7 22:53:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 07:41:10 2013] Counts = 2328.890137, rescaling region sizes by 2.000000
[Sun Jun  9 07:41:10 2013] XMMSAS src. selection expression = ellipse(33595.383423, 32690.764496, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  9 07:41:10 2013] Not overwriting source region fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_src.reg
[Sun Jun  9 07:41:10 2013] Extracting stamp from image fullrun_mos1_xmm0555630201_pi300-10000_cl_sm2.00.img.gz, (312, 301) - (462, 451)
[Sun Jun  9 07:41:10 2013] XMMSAS bgd. selection expression = annulus(33595.383423, 32690.764496, 4350.000000, 8700.000000, X, Y) && !ellipse(31458.062000, 32417.718000, 975.712028, 975.712028, 0.000000, X, Y) && !ellipse(25870.813400, 28171.024000, 3462.024100, 3462.024100, 0.000000, X, Y) && !ellipse(26420.002136, 29716.887421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26038.594000, 28609.354000, 3657.552105, 3657.552105, 0.000000, X, Y) && !ellipse(26527.544388, 30090.765349, 5636.976162, 2228.296196, 117.875075, X, Y) && !ellipse(25949.305380, 28564.130186, 5636.976162, 2046.290782, 111.337412, X, Y) && !ellipse(26644.837800, 30665.748000, 3958.560114, 3958.560114, 0.000000, X, Y) && !ellipse(28161.993408, 33791.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.853200, 31904.238000, 3833.280110, 3833.280110, 0.000000, X, Y) && !ellipse(33824.836365, 29012.818787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27361.706200, 31872.782000, 1475.800042, 1475.800042, 0.000000, X, Y) && !ellipse(27667.197625, 34644.027134, 4723.776136, 2686.987898, 306.464399, X, Y) && !ellipse(26941.083496, 28748.922150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25281.886000, 25612.970000, 1765.832051, 1003.768029, 90.000000, X, Y) && !ellipse(33623.960000, 41435.241600, 6484.800187, 6484.800187, 0.000000, X, Y) && !ellipse(29198.094696, 35224.501434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27735.634800, 32789.772000, 773.538422, 773.538422, 0.000000, X, Y) && !ellipse(27390.564800, 32621.174000, 8708.952251, 8708.952251, 0.000000, X, Y) && !ellipse(25635.974400, 23702.379400, 817.096024, 817.096024, 0.000000, X, Y) && !ellipse(27588.858000, 34259.238600, 878.128025, 878.128025, 0.000000, X, Y) && !ellipse(28841.302820, 37814.563000, 833.832024, 833.832024, 0.000000, X, Y) && !ellipse(28150.478000, 36242.626000, 1100.912032, 1100.912032, 0.000000, X, Y) && !ellipse(29627.436000, 35567.424000, 1686.624049, 1686.624049, 0.000000, X, Y) && !ellipse(28920.734406, 36586.218170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28790.832000, 34625.686000, 10119.744291, 10119.744291, 0.000000, X, Y) && !ellipse(32199.704040, 37946.316000, 1934.368056, 1172.568034, 137.664000, X, Y) && !ellipse(30397.050171, 36491.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30146.110800, 38026.794400, 958.056028, 958.056028, 0.000000, X, Y) && !ellipse(31639.046326, 37548.493713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.608600, 24536.740000, 734.906421, 734.906421, 0.000000, X, Y) && !ellipse(24917.864100, 23695.784800, 718.307221, 718.307221, 0.000000, X, Y) && !ellipse(31009.104000, 40140.300000, 6189.312178, 6189.312178, 0.000000, X, Y) && !ellipse(29523.580600, 38799.792000, 1914.192055, 1914.192055, 0.000000, X, Y) && !ellipse(29464.768494, 36928.801910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30001.172028, 38841.405365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32511.514000, 41067.002000, 6271.416180, 6271.416180, 0.000000, X, Y) && !ellipse(24978.872000, 24686.437800, 866.632025, 866.632025, 0.000000, X, Y) && !ellipse(27182.820468, 24939.530200, 307.704009, 307.704009, 0.000000, X, Y) && !ellipse(27835.438000, 27396.322000, 1264.712036, 1264.712036, 1.500000, X, Y) && !ellipse(28939.506600, 30383.239180, 859.824025, 859.824025, 0.000000, X, Y) && !ellipse(28461.132904, 36677.463562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28583.314000, 30188.174000, 1352.240039, 1352.240039, 0.000000, X, Y) && !ellipse(29228.104492, 32785.724274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32705.412000, 38439.042000, 2010.304058, 2010.304058, 0.000000, X, Y) && !ellipse(30171.188000, 39915.742400, 1489.672043, 1489.672043, 0.000000, X, Y) && !ellipse(35054.967194, 41618.486359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.128113, 33269.213074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.944200, 23332.388000, 762.464822, 762.464822, 0.000000, X, Y) && !ellipse(29731.654000, 39372.940000, 12378.624356, 12378.624356, 0.000000, X, Y) && !ellipse(29879.928000, 31752.872000, 1484.424043, 1484.424043, 0.000000, X, Y) && !ellipse(30860.948000, 36848.818000, 1794.344052, 1794.344052, 0.000000, X, Y) && !ellipse(36824.449400, 23560.812000, 2234.248064, 2234.248064, 0.000000, X, Y) && !ellipse(29868.745400, 29294.631200, 868.776025, 868.776025, 0.000000, X, Y) && !ellipse(33751.002655, 32322.429626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35813.434723, 41696.002594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36296.070800, 23747.728000, 925.592027, 925.592027, 0.000000, X, Y) && !ellipse(35269.328949, 24727.423615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34704.874000, 25618.560000, 1421.024041, 1421.024041, 0.000000, X, Y) && !ellipse(34970.136353, 26491.186127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32316.596527, 39631.279236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29056.212000, 27623.748400, 2451.056071, 2451.056071, 0.000000, X, Y) && !ellipse(31413.185638, 38682.493896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33224.536896, 34935.682037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35159.214264, 25259.738403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35091.601288, 24060.416534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29798.958000, 27579.338000, 1330.216038, 1330.216038, 0.000000, X, Y) && !ellipse(35860.278000, 25692.330000, 1716.088049, 1716.088049, 0.000000, X, Y) && !ellipse(32049.921880, 31328.872000, 1142.032033, 1142.032033, 0.000000, X, Y) && !ellipse(33713.927826, 23346.149933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36550.254000, 24801.392000, 1716.088049, 1716.088049, 0.000000, X, Y) && !ellipse(29213.496521, 26473.559387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32536.966614, 32941.489532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32010.145081, 31856.294098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31139.696800, 32158.887840, 703.360020, 703.360020, 0.000000, X, Y) && !ellipse(34756.733063, 29077.216522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38829.032928, 28392.099487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33937.930000, 22736.888000, 1575.960045, 1575.960045, 0.000000, X, Y) && !ellipse(37355.818237, 40743.627655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33732.096000, 35325.537600, 1282.816037, 1282.816037, 0.000000, X, Y) && !ellipse(37537.884216, 24933.963654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.035126, 23439.771576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35573.890015, 25182.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33136.052734, 39356.935059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38466.101044, 23194.080475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33407.582000, 23997.490000, 1575.960045, 1575.960045, 0.000000, X, Y) && !ellipse(31928.784363, 36195.602295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38925.227295, 24317.136627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37383.889862, 32135.048279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34847.797913, 31953.911560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38902.048889, 23524.079376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35265.465881, 36687.491608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29589.294678, 26409.291748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38094.681030, 40136.199432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36486.402344, 34038.231689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36067.712189, 33536.197510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33447.325714, 33346.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34101.163849, 31640.936707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35141.141479, 42183.256226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41623.390198, 28235.484619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35341.808594, 39968.059082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32354.106781, 23746.833679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37318.005310, 33698.876465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.887482, 31016.362305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31823.130127, 26214.943604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30415.332703, 30962.146606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42499.648102, 26663.378052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34553.891479, 39799.493927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39006.335785, 39019.836609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41526.136475, 30238.528992, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 07:41:10 2013] Writing fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50.gif
[Sun Jun  9 07:41:28 2013] ../../xmm0555630201/products/events/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_src.evt and ../../xmm0555630201/products/events/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_bgd.evt exist, delete to re-create
[Sun Jun  9 07:41:28 2013] Mean detx,y = (3619.02, 7490.39) 
[Sun Jun  9 07:41:28 2013] ../../xmm0555630201/products/images/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_src.img and ../../xmm0555630201/products/images/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_bgd.img exist, delete to re-create
[Sun Jun  9 07:41:28 2013] ../../xmm0555630201/products/spectra/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_src_b10.pi.gz and ../../xmm0555630201/products/spectra/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_bgd.pi exist, delete to re-create
[Sun Jun  9 07:41:28 2013] Setting source spectrum file to fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sun Jun  9 07:41:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sun Jun  9 07:41:28 2013] ../../xmm0555630201/products/lightcurves/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_src.lc and ../../xmm0555630201/products/lightcurves/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_bgd.lc exist, delete to re-create
[Sun Jun  9 07:42:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 07:42:19 2013] rmf not generated due to insufficient counts
[Sun Jun  9 07:42:19 2013] fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50.arf exists, delete to re-create
[Sun Jun  9 14:57:17 2013] Updating aperture counts using extracted products
[Sun Jun  9 14:57:17 2013] Total counts from fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 12327.00
[Sun Jun  9 14:57:17 2013] Total counts from fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_bgd.pi.gz = 31244.00
[Sun Jun  9 14:57:17 2013] Got source and background scale factors 4662964.000000, 20826960.000000
[Sun Jun  9 14:57:18 2013] User source parameters:
  Position = (386.7, 376.3) = 15 3 35.08 -41 49 20.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 5331.8 +/- 112.0
  Background aperture counts = 6995.2
  Rate = 0.05 +/- 0.001

[Sun Jun  9 14:57:18 2013] Updating counts from extracted products
[Sun Jun  9 14:57:18 2013] Set source signif. to 5331.76/83.64 = 63.75
[Sun Jun  9 14:57:56 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 14:57:56 2013] Using photon index=1.80, rate=0.0491, arf fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50.arf
[Sun Jun  9 14:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 14:57:56 2013] Updating source flux to 6.6e-13
[Sun Jun  9 14:59:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 15:00:44 2013] xmm0555630201/analysis//spectral/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete