[Fri Jun  7 22:47:35 2013] Detection parameters:
  Position = (310.2, 331.0) = 15 4 4.84 -41 52 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4613.0 +/- 92.5
  Background counts = 312.3
  Rate = 0.04 +/- 0.0009

[Fri Jun  7 22:47:49 2013] Off-axis axis estimate = 2.51'
[Fri Jun  7 22:50:15 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:50:15 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Fri Jun  7 22:50:15 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Fri Jun  7 22:50:15 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.68"
[Fri Jun  7 22:50:16 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun  7 22:50:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src13.csv
[Fri Jun  7 22:50:16 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun  7 22:50:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src13.csv
[Fri Jun  7 22:50:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:50:19 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun  7 22:50:19 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun  7 22:50:19 2013] Fit fullrun_mos1_xmm0555630201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun  7 22:51:25 2013] Source 12 is offset by 7.290960 and -0.290787 pixels which is larger than
2 X fitted extent = 7.065839 x 7.065839, not incorporating fit results
[Fri Jun  7 22:51:26 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:51:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:51:26 2013] Assessing source extent using major
[Fri Jun  7 22:51:26 2013] Source does appear to be extended
[Fri Jun  7 22:51:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:52:42 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:52:42 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Fri Jun  7 22:52:42 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Fri Jun  7 22:52:42 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.68"
[Fri Jun  7 22:52:45 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun  7 22:52:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src12.csv
[Fri Jun  7 22:52:45 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun  7 22:52:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src12.csv
[Fri Jun  7 22:52:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:52:48 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun  7 22:52:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jun  7 22:52:48 2013] fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun  7 22:52:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jun  7 22:52:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:53:51 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 18.312780 pixels away
[Fri Jun  7 22:53:51 2013] Spatial fit model total counts = 40606.700000, observed total counts = 29634.000000
[Fri Jun  7 22:53:51 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 22:53:52 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:53:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:53:52 2013] Assessing source extent using major
[Fri Jun  7 22:53:52 2013] Source does appear to be extended
[Fri Jun  7 22:53:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:53:52 2013] Source is confused with source 11
[Fri Jun  7 22:53:52 2013] Source is confused with source 9
[Fri Jun  7 22:53:52 2013] Source is confused with source 15
[Sun Jun  9 07:41:08 2013] Counts = 4613.029297, rescaling region sizes by 2.000000
[Sun Jun  9 07:41:08 2013] XMMSAS src. selection expression = ellipse(26941.083496, 28748.922150, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  9 07:41:08 2013] Not overwriting source region fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_src.reg
[Sun Jun  9 07:41:08 2013] Extracting stamp from image fullrun_mos1_xmm0555630201_pi300-10000_cl_sm2.00.img.gz, (235, 256) - (385, 406)
[Sun Jun  9 07:41:08 2013] XMMSAS bgd. selection expression = annulus(26941.083496, 28748.922150, 4350.000000, 8700.000000, X, Y) && !ellipse(31458.062000, 32417.718000, 975.712028, 975.712028, 0.000000, X, Y) && !ellipse(25870.813400, 28171.024000, 3462.024100, 3462.024100, 0.000000, X, Y) && !ellipse(26420.002136, 29716.887421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26038.594000, 28609.354000, 3657.552105, 3657.552105, 0.000000, X, Y) && !ellipse(26527.544388, 30090.765349, 5636.976162, 2228.296196, 117.875075, X, Y) && !ellipse(25949.305380, 28564.130186, 5636.976162, 2046.290782, 111.337412, X, Y) && !ellipse(26644.837800, 30665.748000, 3958.560114, 3958.560114, 0.000000, X, Y) && !ellipse(28161.993408, 33791.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.853200, 31904.238000, 3833.280110, 3833.280110, 0.000000, X, Y) && !ellipse(33824.836365, 29012.818787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27361.706200, 31872.782000, 1475.800042, 1475.800042, 0.000000, X, Y) && !ellipse(27667.197625, 34644.027134, 4723.776136, 2686.987898, 306.464399, X, Y) && !ellipse(25281.886000, 25612.970000, 1765.832051, 1003.768029, 90.000000, X, Y) && !ellipse(33623.960000, 41435.241600, 6484.800187, 6484.800187, 0.000000, X, Y) && !ellipse(29198.094696, 35224.501434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27735.634800, 32789.772000, 773.538422, 773.538422, 0.000000, X, Y) && !ellipse(27390.564800, 32621.174000, 8708.952251, 8708.952251, 0.000000, X, Y) && !ellipse(25635.974400, 23702.379400, 817.096024, 817.096024, 0.000000, X, Y) && !ellipse(27588.858000, 34259.238600, 878.128025, 878.128025, 0.000000, X, Y) && !ellipse(33595.383423, 32690.764496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28841.302820, 37814.563000, 833.832024, 833.832024, 0.000000, X, Y) && !ellipse(28150.478000, 36242.626000, 1100.912032, 1100.912032, 0.000000, X, Y) && !ellipse(29627.436000, 35567.424000, 1686.624049, 1686.624049, 0.000000, X, Y) && !ellipse(28920.734406, 36586.218170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28790.832000, 34625.686000, 10119.744291, 10119.744291, 0.000000, X, Y) && !ellipse(32199.704040, 37946.316000, 1934.368056, 1172.568034, 137.664000, X, Y) && !ellipse(30397.050171, 36491.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30146.110800, 38026.794400, 958.056028, 958.056028, 0.000000, X, Y) && !ellipse(31639.046326, 37548.493713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.608600, 24536.740000, 734.906421, 734.906421, 0.000000, X, Y) && !ellipse(24917.864100, 23695.784800, 718.307221, 718.307221, 0.000000, X, Y) && !ellipse(31009.104000, 40140.300000, 6189.312178, 6189.312178, 0.000000, X, Y) && !ellipse(25831.570000, 21171.592000, 615.291218, 615.291218, 0.000000, X, Y) && !ellipse(29523.580600, 38799.792000, 1914.192055, 1914.192055, 0.000000, X, Y) && !ellipse(25388.394800, 22084.610000, 1264.680036, 1264.680036, 0.000000, X, Y) && !ellipse(29464.768494, 36928.801910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32511.514000, 41067.002000, 6271.416180, 6271.416180, 0.000000, X, Y) && !ellipse(25521.418091, 22395.365356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.872000, 24686.437800, 866.632025, 866.632025, 0.000000, X, Y) && !ellipse(27182.820468, 24939.530200, 307.704009, 307.704009, 0.000000, X, Y) && !ellipse(26396.266174, 21353.192017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25320.314000, 20892.668000, 1344.960039, 1344.960039, 359.910000, X, Y) && !ellipse(27835.438000, 27396.322000, 1264.712036, 1264.712036, 1.500000, X, Y) && !ellipse(28939.506600, 30383.239180, 859.824025, 859.824025, 0.000000, X, Y) && !ellipse(28461.132904, 36677.463562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28583.314000, 30188.174000, 1352.240039, 1352.240039, 0.000000, X, Y) && !ellipse(29228.104492, 32785.724274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32705.412000, 38439.042000, 2010.304058, 2010.304058, 0.000000, X, Y) && !ellipse(29441.128113, 33269.213074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.944200, 23332.388000, 762.464822, 762.464822, 0.000000, X, Y) && !ellipse(29731.654000, 39372.940000, 12378.624356, 12378.624356, 0.000000, X, Y) && !ellipse(29879.928000, 31752.872000, 1484.424043, 1484.424043, 0.000000, X, Y) && !ellipse(30860.948000, 36848.818000, 1794.344052, 1794.344052, 0.000000, X, Y) && !ellipse(36824.449400, 23560.812000, 2234.248064, 2234.248064, 0.000000, X, Y) && !ellipse(29868.745400, 29294.631200, 868.776025, 868.776025, 0.000000, X, Y) && !ellipse(33751.002655, 32322.429626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36296.070800, 23747.728000, 925.592027, 925.592027, 0.000000, X, Y) && !ellipse(35269.328949, 24727.423615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27521.629547, 21670.858307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34704.874000, 25618.560000, 1421.024041, 1421.024041, 0.000000, X, Y) && !ellipse(27524.722000, 22627.906000, 1032.440030, 1032.440030, 0.000000, X, Y) && !ellipse(34970.136353, 26491.186127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29056.212000, 27623.748400, 2451.056071, 2451.056071, 0.000000, X, Y) && !ellipse(33224.536896, 34935.682037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30127.365570, 21853.971695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29334.937561, 22543.916901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35159.214264, 25259.738403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35091.601288, 24060.416534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29798.958000, 27579.338000, 1330.216038, 1330.216038, 0.000000, X, Y) && !ellipse(30105.138600, 22811.401000, 723.039221, 723.039221, 0.000000, X, Y) && !ellipse(35860.278000, 25692.330000, 1716.088049, 1716.088049, 0.000000, X, Y) && !ellipse(32049.921880, 31328.872000, 1142.032033, 1142.032033, 0.000000, X, Y) && !ellipse(33713.927826, 23346.149933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36550.254000, 24801.392000, 1716.088049, 1716.088049, 0.000000, X, Y) && !ellipse(29213.496521, 26473.559387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36166.657166, 23008.711639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34958.278000, 22499.070000, 1177.424034, 1177.424034, 0.000000, X, Y) && !ellipse(32536.966614, 32941.489532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32010.145081, 31856.294098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31139.696800, 32158.887840, 703.360020, 703.360020, 0.000000, X, Y) && !ellipse(34756.733063, 29077.216522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33937.930000, 22736.888000, 1575.960045, 1575.960045, 0.000000, X, Y) && !ellipse(33732.096000, 35325.537600, 1282.816037, 1282.816037, 0.000000, X, Y) && !ellipse(28466.238000, 21603.778000, 1368.072039, 1368.072039, 0.000000, X, Y) && !ellipse(35711.279816, 20661.396255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35836.658264, 22146.048813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.035126, 23439.771576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35573.890015, 25182.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33407.582000, 23997.490000, 1575.960045, 1575.960045, 0.000000, X, Y) && !ellipse(31928.784363, 36195.602295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35766.937195, 22751.088837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32018.909332, 22577.911896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36277.220551, 22318.863342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34847.797913, 31953.911560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36480.269226, 20214.518982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35265.465881, 36687.491608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29589.294678, 26409.291748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36486.402344, 34038.231689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36067.712189, 33536.197510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33447.325714, 33346.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34101.163849, 31640.936707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21751.587128, 23023.308990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32354.106781, 23746.833679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33253.691772, 22527.490234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22275.514679, 26572.384888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.887482, 31016.362305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31823.130127, 26214.943604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30415.332703, 30962.146606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35022.209442, 21349.510818, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 07:41:08 2013] Writing fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12.gif
[Sun Jun  9 07:41:26 2013] ../../xmm0555630201/products/events/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0555630201/products/events/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sun Jun  9 07:41:26 2013] Mean detx,y = (1273.96, 85.96) 
[Sun Jun  9 07:41:26 2013] ../../xmm0555630201/products/images/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_src.img and ../../xmm0555630201/products/images/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Sun Jun  9 07:41:26 2013] ../../xmm0555630201/products/spectra/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0555630201/products/spectra/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sun Jun  9 07:41:26 2013] Setting source spectrum file to fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Jun  9 07:41:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Jun  9 07:41:26 2013] ../../xmm0555630201/products/lightcurves/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0555630201/products/lightcurves/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sun Jun  9 07:42:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 07:42:19 2013] rmf not generated due to insufficient counts
[Sun Jun  9 07:42:19 2013] fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Sun Jun  9 14:57:15 2013] Updating aperture counts using extracted products
[Sun Jun  9 14:57:15 2013] Total counts from fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 79808.00
[Sun Jun  9 14:57:15 2013] Total counts from fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_bgd.pi.gz = 24400.00
[Sun Jun  9 14:57:15 2013] Got source and background scale factors 5210632.000000, 25476549.000000
[Sun Jun  9 14:57:15 2013] User source parameters:
  Position = (310.2, 331.0) = 15 4 4.84 -41 52 42.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 74817.6 +/- 283.5
  Background aperture counts = 4990.4
  Rate = 0.7 +/- 0.003

[Sun Jun  9 14:57:15 2013] Updating counts from extracted products
[Sun Jun  9 14:57:15 2013] Set source signif. to 74817.55/70.64 = 1059.09
[Sun Jun  9 14:57:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 14:57:55 2013] Using photon index=1.80, rate=0.689, arf fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12.arf
[Sun Jun  9 14:57:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 14:57:55 2013] Updating source flux to 6.7e-12
[Sun Jun  9 14:59:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 15:00:44 2013] xmm0555630201/analysis//spectral/fullrun_mos1_xmm0555630201_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete