[Sun Jun 16 00:53:56 2013] Detection parameters:
  Position = (408.2, 220.1) = 15 2 56.39 -42 10 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 883.1 +/- 46.6
  Background counts = 272.4
  Rate = 0.02 +/- 0.001

[Sun Jun 16 00:54:43 2013] Off-axis axis estimate = 9.78'
[Sun Jun 16 00:59:10 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:59:10 2013] Initial guess for spatial extent in simple fitting = 11.32"
[Sun Jun 16 00:59:10 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Sun Jun 16 00:59:10 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 11.32"
[Sun Jun 16 00:59:16 2013] fullrun_pn_xmm0555630101_pi300-10000_cl_pass0_src54.ximg exists
[Sun Jun 16 00:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630101_pi300-10000_cl_pass0_src54.csv
[Sun Jun 16 00:59:16 2013] fullrun_pn_xmm0555630101_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun Jun 16 00:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630101_pi300-10000_cl_pass0_src54.csv
[Sun Jun 16 00:59:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630101_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:59:21 2013] fullrun_pn_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun Jun 16 00:59:21 2013] fullrun_pn_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun Jun 16 00:59:21 2013] Fit fullrun_pn_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Sun Jun 16 01:00:43 2013] Warning, spatial fit 54 centroid is now closest to src. 168
[Sun Jun 16 01:00:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 01:00:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 01:00:44 2013] Assessing source extent using major
[Sun Jun 16 01:00:44 2013] Source does appear to be extended
[Sun Jun 16 01:00:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:03:46 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:03:46 2013] Initial guess for spatial extent in simple fitting = 11.32"
[Sun Jun 16 01:03:46 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Sun Jun 16 01:03:46 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 11.32"
[Sun Jun 16 01:03:49 2013] fullrun_pn_xmm0555630101_pi300-10000_cl_pass1_src51.ximg exists
[Sun Jun 16 01:03:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630101_pi300-10000_cl_pass1_src51.csv
[Sun Jun 16 01:03:49 2013] fullrun_pn_xmm0555630101_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun Jun 16 01:03:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630101_pi300-10000_cl_pass1_src51.csv
[Sun Jun 16 01:03:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 01:03:51 2013] fullrun_pn_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun Jun 16 01:03:51 2013] fullrun_pn_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun Jun 16 01:03:51 2013] Fit fullrun_pn_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sun Jun 16 01:04:54 2013] Warning, spatial fit 51 centroid is now closest to src. 168
[Sun Jun 16 01:04:55 2013] Source 66 is offset by -1.728876 and -1.280937 pixels which is larger than
2 X fitted extent = 1.278841 x 1.278841, not incorporating fit results
[Sun Jun 16 01:04:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 01:04:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 01:04:55 2013] Assessing source extent using major
[Sun Jun 16 01:04:55 2013] Source does appear to be extended
[Sun Jun 16 01:04:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:04:56 2013] Source is confused with source 168
[Sun Jun 16 01:08:13 2013] XMMSAS src. selection expression = ellipse(35463.679749, 19096.410477, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 01:08:13 2013] Not overwriting source region fullrun_pn_xmm0555630101_pi300-10000_pass1_cl_src66_src.reg
[Sun Jun 16 01:08:13 2013] Extracting stamp from image fullrun_pn_xmm0555630101_pi300-10000_cl_sm2.00.img.gz, (371, 183) - (446, 258)
[Sun Jun 16 01:08:13 2013] XMMSAS bgd. selection expression = annulus(35463.679749, 19096.410477, 1087.500000, 2175.000000, X, Y) && !ellipse(34147.464905, 19599.591629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38076.794098, 19265.798691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34243.497314, 21717.935959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37503.557343, 20409.201660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33883.812531, 20379.083008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37697.977173, 19873.168503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33369.228027, 19631.178513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37209.064148, 19075.016251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35094.001434, 21958.725876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32484.946625, 21902.055603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36532.281250, 21673.296951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38323.614000, 21457.334000, 1947.976056, 1947.976056, 0.000000, X, Y) && !ellipse(36920.571320, 21620.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33591.576111, 20897.379242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34325.243011, 20838.075180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38362.414185, 20411.631012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34834.143097, 20565.582886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34746.460754, 19980.387878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36948.133179, 19867.144241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37009.751099, 18079.892685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35859.012000, 18935.322000, 1810.784052, 1810.784052, 0.000000, X, Y) && !ellipse(33396.102234, 21938.673767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29777.116000, 21477.480000, 9174.144264, 9174.144264, 0.000000, X, Y) && !ellipse(35813.219666, 21005.785416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35869.654968, 20218.551971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36593.694733, 19001.450699, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 01:08:13 2013] Writing fullrun_pn_xmm0555630101_pi300-10000_pass1_cl_src66.gif