[Sun Jun 16 00:55:47 2013] Detection parameters: Position = (401.3, 260.0) = 15 2 59.13 -42 7 58.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 321.3 +/- 29.6 Background counts = 160.8 Rate = 0.01 +/- 0.001 [Sun Jun 16 00:55:56 2013] Off-axis axis estimate = 7.96' [Sun Jun 16 00:59:37 2013] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting [Sun Jun 16 00:59:37 2013] Initial guess for spatial extent in simple fitting = 10.41" [Sun Jun 16 00:59:37 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.076 [Sun Jun 16 00:59:37 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 10.41" [Sun Jun 16 00:59:40 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src51.ximg exists [Sun Jun 16 00:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src51.csv [Sun Jun 16 00:59:40 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src51_1.ximg exists [Sun Jun 16 00:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src51.csv [Sun Jun 16 00:59:40 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src51_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 16 00:59:43 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists [Sun Jun 16 00:59:43 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists [Sun Jun 16 00:59:43 2013] Fit fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly [Sun Jun 16 01:01:54 2013] Source 246 is offset by -0.161822 and -1.397906 pixels which is larger than 2 X fitted extent = 1.178828 x 1.178828, not incorporating fit results [Sun Jun 16 01:01:55 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 246 at 14.055553 pixels away [Sun Jun 16 01:01:56 2013] Source 246 is offset by 6.742500 and -5.440986 pixels which is larger than 2 X fitted extent = 9.473701 x 1.184212, not incorporating fit results [Sun Jun 16 01:01:56 2013] Vigneting correction estimate = 1.000000 [Sun Jun 16 01:01:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 16 01:01:56 2013] Assessing source extent using major [Sun Jun 16 01:01:56 2013] Source does appear to be extended [Sun Jun 16 01:01:56 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 01:01:56 2013] Source is confused with source 263 [Sun Jun 16 01:03:59 2013] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting [Sun Jun 16 01:03:59 2013] Initial guess for spatial extent in simple fitting = 10.41" [Sun Jun 16 01:03:59 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.076 [Sun Jun 16 01:03:59 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 10.41" [Sun Jun 16 01:04:02 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src50.ximg exists [Sun Jun 16 01:04:02 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src50_1.ximg exists [Sun Jun 16 01:04:02 2013] Fit fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src50 appears to have run properly [Sun Jun 16 01:04:04 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists [Sun Jun 16 01:04:04 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists [Sun Jun 16 01:04:04 2013] Fit fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly [Sun Jun 16 01:06:08 2013] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 246 at 14.055553 pixels away [Sun Jun 16 01:06:09 2013] Spatial fit model total counts = 3193.120000, observed total counts = 3197.000000 [Sun Jun 16 01:06:09 2013] Offset between fit and detection position for source 246 = 0.880518 pixels [Sun Jun 16 01:06:09 2013] Warning, changing simple spatial fit ID from 50 to 83 [Sun Jun 16 01:06:09 2013] 2868.803000 total counts/ 2006.230000 bgd. counts: snr = 19.257748 Spatial fit parameters: Offset between fit and detection position for source 246 = 0.880518 pixels Position = (401.4, 259.2) = 15 2 59.07 -42 8 3.5 Extent = 21.2 (21.2-21.2)", rotation angle = 0 Source counts = 862.6 +/- 53.6 Background counts = 2006.2 Rate = 0.02 +/- 0.001 [Sun Jun 16 01:06:09 2013] Vigneting correction estimate = 1.000000 [Sun Jun 16 01:06:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 16 01:06:09 2013] Assessing source extent using major axis lower bound [Sun Jun 16 01:06:09 2013] Source does appear to be extended [Sun Jun 16 01:06:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 01:11:06 2013] XMMSAS src. selection expression = ellipse(34874.602000, 22498.804000, 1269.960037, 1269.960037, 0.000000, X, Y) [Sun Jun 16 01:11:06 2013] Not overwriting source region fullrun_mos2_xmm0555630101_pi300-10000_pass1_cl_src246_src.reg [Sun Jun 16 01:11:06 2013] Extracting stamp from image fullrun_mos2_xmm0555630101_pi300-10000_cl_sm2.00.img.gz, (328, 186) - (474, 332) [Sun Jun 16 01:11:06 2013] XMMSAS bgd. selection expression = annulus(34874.602000, 22498.804000, 2116.600061, 4233.200122, X, Y) && !ellipse(41980.440000, 21162.862000, 4141.088119, 4141.088119, 0.000000, X, Y) && !ellipse(34212.388660, 22074.918000, 1465.104042, 1465.104042, 0.000000, X, Y) && !ellipse(30483.410309, 22533.713623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32853.791280, 24858.610000, 853.784025, 853.784025, 0.000000, X, Y) && !ellipse(34287.580200, 22646.220000, 521.913615, 521.913615, 0.000000, X, Y) && !ellipse(31879.328000, 19790.822000, 2760.192079, 2760.192079, 0.000000, X, Y) && !ellipse(33314.436200, 19744.591600, 896.184026, 896.184026, 0.000000, X, Y) && !ellipse(37331.797020, 20669.821000, 980.416028, 980.416028, 0.000000, X, Y) && !ellipse(33804.956000, 20997.992000, 763.980022, 763.980022, 0.000000, X, Y) && !ellipse(31022.999878, 22716.026520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33637.696625, 23651.908417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37687.211029, 25968.530334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39501.398000, 19945.872000, 1736.552050, 1736.552050, 0.000000, X, Y) && !ellipse(40770.792000, 20828.122000, 2070.544060, 2070.544060, 0.000000, X, Y) && !ellipse(33398.580000, 19481.996000, 1638.168047, 1638.168047, 0.000000, X, Y) && !ellipse(34241.912262, 21332.790771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39364.086000, 19731.158000, 2029.392058, 2029.392058, 0.000000, X, Y) && !ellipse(33700.898000, 19870.376000, 3345.584096, 3345.584096, 0.000000, X, Y) && !ellipse(34494.028534, 23921.292999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30812.687042, 20628.611954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36503.633484, 21710.901459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35141.308746, 22134.216675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38162.790497, 19350.401199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36153.828600, 26628.215400, 1126.672032, 779.444822, 14.126987, X, Y) && !ellipse(35459.498077, 18931.855743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34786.498596, 20315.309204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32409.599548, 22042.806671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30135.922729, 21265.396835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31314.972000, 20326.886000, 1509.008043, 1509.008043, 0.000000, X, Y) && !ellipse(37729.423340, 27007.998199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31647.868988, 25016.572235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36704.645752, 19632.194061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31603.859222, 25867.617981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33010.199036, 23356.836426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38309.972046, 25814.368713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31872.983612, 22046.671066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37536.662903, 19613.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38278.310822, 27001.249115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38916.107269, 26835.962921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37044.696594, 26667.034027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39313.684631, 26424.433380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32074.420685, 25632.183258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37990.850800, 19964.250610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36728.371094, 18992.351913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35470.041199, 21626.237885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34812.727631, 27279.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31898.994934, 20947.410614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31219.506561, 23428.320435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29965.422058, 22438.785706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36913.325745, 27335.182770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35874.128693, 20390.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37364.614349, 19009.741028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38723.354797, 19616.078033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36511.537506, 27601.123779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38769.921356, 21030.056366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39197.213806, 25623.692474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31223.890015, 21954.475174, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 16 01:11:06 2013] Writing fullrun_mos2_xmm0555630101_pi300-10000_pass1_cl_src246.gif