[Sun Jun 16 00:55:39 2013] Detection parameters:
  Position = (274.9, 318.0) = 15 3 48.54 -42 3 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 841.1 +/- 46.1
  Background counts = 277.0
  Rate = 0.02 +/- 0.001

[Sun Jun 16 00:55:56 2013] Off-axis axis estimate = 2.22'
[Sun Jun 16 00:59:37 2013] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:59:37 2013] Initial guess for spatial extent in simple fitting = 7.54"
[Sun Jun 16 00:59:37 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Sun Jun 16 00:59:37 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.54"
[Sun Jun 16 00:59:39 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun 16 00:59:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src11.csv
[Sun Jun 16 00:59:39 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun 16 00:59:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src11.csv
[Sun Jun 16 00:59:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:59:42 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun 16 00:59:42 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun 16 00:59:42 2013] Fit fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Jun 16 01:01:54 2013] Spatial fit model total counts = 5681.360000, observed total counts = 5575.000000
[Sun Jun 16 01:01:54 2013] Offset between fit and detection position for source 180 = 0.079321 pixels
[Sun Jun 16 01:01:54 2013] 5787.594000 total counts/ 5179.290000 bgd. counts: snr = 8.452507
Spatial fit parameters:
  Offset between fit and detection position for source 180 = 0.079321 pixels
  Position = (274.8, 318.1) = 15 3 48.56 -42 3 47.8
  Extent = 8.9 (7.8-10.5)", rotation angle = 0
  Source counts = 608.3 +/- 76.1
  Background counts = 5179.3
  Rate = 0.01 +/- 0.002
[Sun Jun 16 01:01:56 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 01:01:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 01:01:56 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 01:01:56 2013] Source does appear to be extended
[Sun Jun 16 01:01:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:01:56 2013] Source is confused with source 168
[Sun Jun 16 01:03:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:03:59 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Sun Jun 16 01:03:59 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Sun Jun 16 01:03:59 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 8.87"
[Sun Jun 16 01:04:01 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun 16 01:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src11.csv
[Sun Jun 16 01:04:01 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun 16 01:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src11.csv
[Sun Jun 16 01:04:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 01:04:03 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun 16 01:04:03 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun 16 01:04:03 2013] Fit fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Jun 16 01:06:08 2013] Spatial fit model total counts = 5566.020000, observed total counts = 5500.000000
[Sun Jun 16 01:06:08 2013] Offset between fit and detection position for source 180 = 0.074000 pixels
[Sun Jun 16 01:06:08 2013] 5715.940000 total counts/ 5158.500000 bgd. counts: snr = 7.761335
Spatial fit parameters:
  Offset between fit and detection position for source 180 = 0.074000 pixels
  Position = (274.8, 318.1) = 15 3 48.59 -42 3 47.8
  Extent = 8.7 (7.4-10.1)", rotation angle = 0
  Source counts = 557.4 +/- 75.6
  Background counts = 5158.5
  Rate = 0.01 +/- 0.002
[Sun Jun 16 01:06:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 01:06:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 01:06:09 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 01:06:09 2013] Source does appear to be extended
[Sun Jun 16 01:06:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:10:58 2013] XMMSAS src. selection expression = ellipse(23856.057400, 27621.970600, 519.452415, 519.452415, 0.000000, X, Y)
[Sun Jun 16 01:10:58 2013] Not overwriting source region fullrun_mos2_xmm0555630101_pi300-10000_pass1_cl_src180_src.reg
[Sun Jun 16 01:10:58 2013] Extracting stamp from image fullrun_mos2_xmm0555630101_pi300-10000_cl_sm2.00.img.gz, (245, 288) - (305, 348)
[Sun Jun 16 01:10:58 2013] XMMSAS bgd. selection expression = annulus(23856.057400, 27621.970600, 865.754025, 1731.508050, X, Y) && !ellipse(24937.160309, 29879.391144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.800000, 26783.722600, 1102.360032, 1102.360032, 0.000000, X, Y) && !ellipse(23798.784910, 28364.353801, 1492.296043, 1074.139365, 69.448755, X, Y) && !ellipse(22158.683200, 27665.682520, 931.416027, 931.416027, 0.000000, X, Y) && !ellipse(24919.586000, 27940.904800, 661.551219, 661.551219, 0.000000, X, Y) && !ellipse(24537.433600, 24930.994000, 1131.144033, 811.336023, 89.889000, X, Y) && !ellipse(20829.307200, 28711.140000, 1419.425217, 1419.425217, 0.000000, X, Y) && !ellipse(24249.708000, 30105.986000, 1346.776039, 1346.776039, 0.000000, X, Y) && !ellipse(21596.190000, 27699.006000, 725.858421, 725.858421, 0.000000, X, Y) && !ellipse(23669.912600, 25363.961600, 2365.936068, 1452.752042, 7.630000, X, Y) && !ellipse(25028.782715, 26577.952484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23106.103424, 25186.087891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22384.434601, 26311.570740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24390.643768, 28656.142151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.869537, 26504.487823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22566.304108, 26826.102142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.029816, 27967.507202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28010.064000, 26919.770000, 2424.368070, 2424.368070, 0.000000, X, Y) && !ellipse(23074.904175, 27285.777985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21548.318085, 26664.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21729.718979, 28300.397430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22823.799469, 28293.053619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22180.309311, 29757.684601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21649.595505, 29947.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25500.323883, 25578.405640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26368.972473, 28338.682953, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 01:10:58 2013] Writing fullrun_mos2_xmm0555630101_pi300-10000_pass1_cl_src180.gif