[Sun Jun 16 00:55:34 2013] Detection parameters:
  Position = (274.9, 348.0) = 15 3 48.53 -42 1 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 388.9 +/- 35.6
  Background counts = 347.6
  Rate = 0.01 +/- 0.001

[Sun Jun 16 00:55:56 2013] Off-axis axis estimate = 3.98'
[Sun Jun 16 00:59:37 2013] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:59:37 2013] Initial guess for spatial extent in simple fitting = 8.42"
[Sun Jun 16 00:59:37 2013] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.506
[Sun Jun 16 00:59:37 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 8.42"
[Sun Jun 16 00:59:40 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src41.ximg exists
[Sun Jun 16 00:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src41.csv
[Sun Jun 16 00:59:40 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Jun 16 00:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src41.csv
[Sun Jun 16 00:59:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:59:43 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Jun 16 00:59:43 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Jun 16 00:59:43 2013] Fit fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sun Jun 16 01:01:54 2013] Warning, spatial fit 41 centroid is now closest to src. 130
[Sun Jun 16 01:01:56 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 01:01:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 01:01:56 2013] Assessing source extent using major
[Sun Jun 16 01:01:56 2013] Source does appear to be extended
[Sun Jun 16 01:01:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:03:59 2013] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:03:59 2013] Initial guess for spatial extent in simple fitting = 8.42"
[Sun Jun 16 01:03:59 2013] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.506
[Sun Jun 16 01:03:59 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 8.42"
[Sun Jun 16 01:04:01 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src41.ximg exists
[Sun Jun 16 01:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src41.csv
[Sun Jun 16 01:04:01 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sun Jun 16 01:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src41.csv
[Sun Jun 16 01:04:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 01:04:04 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sun Jun 16 01:04:04 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sun Jun 16 01:04:04 2013] Fit fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sun Jun 16 01:06:08 2013] Spatial fit model total counts = 4333.340000, observed total counts = 4296.000000
[Sun Jun 16 01:06:08 2013] Offset between fit and detection position for source 136 = 4.618230 pixels
[Sun Jun 16 01:06:08 2013] 4352.469000 total counts/ 3383.190000 bgd. counts: snr = 16.664244
Spatial fit parameters:
  Offset between fit and detection position for source 136 = 4.618230 pixels
  Position = (279.3, 346.6) = 15 3 46.82 -42 1 43.6
  Extent = 16.8 (16.8-33.7)", rotation angle = 0
  Source counts = 969.3 +/- 66.0
  Background counts = 3383.2
  Rate = 0.02 +/- 0.001
[Sun Jun 16 01:06:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 01:06:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 01:06:09 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 01:06:09 2013] Source does appear to be extended
[Sun Jun 16 01:06:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:06:09 2013] Source is confused with source 148
[Sun Jun 16 01:06:09 2013] Source is confused with source 132
[Sun Jun 16 01:11:04 2013] XMMSAS src. selection expression = ellipse(24249.708000, 30105.986000, 1010.082029, 1010.082029, 0.000000, X, Y)
[Sun Jun 16 01:11:04 2013] Not overwriting source region fullrun_mos2_xmm0555630101_pi300-10000_pass1_cl_src136_src.reg
[Sun Jun 16 01:11:04 2013] Extracting stamp from image fullrun_mos2_xmm0555630101_pi300-10000_cl_sm2.00.img.gz, (221, 289) - (337, 405)
[Sun Jun 16 01:11:04 2013] XMMSAS bgd. selection expression = annulus(24249.708000, 30105.986000, 1683.470048, 3366.940097, X, Y) && !ellipse(23856.057400, 27621.970600, 692.603220, 692.603220, 0.000000, X, Y) && !ellipse(27669.727025, 26233.658038, 1122.016032, 1120.018604, 170.330964, X, Y) && !ellipse(19202.438000, 33281.016000, 1686.040049, 1686.040049, 0.000000, X, Y) && !ellipse(24937.160309, 29879.391144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21139.564000, 31063.063800, 1492.296043, 1492.296043, 0.000000, X, Y) && !ellipse(24483.800000, 26783.722600, 1102.360032, 1102.360032, 0.000000, X, Y) && !ellipse(23798.784910, 28364.353801, 1492.296043, 1074.139365, 69.448755, X, Y) && !ellipse(22158.683200, 27665.682520, 931.416027, 931.416027, 0.000000, X, Y) && !ellipse(24919.586000, 27940.904800, 661.551219, 661.551219, 0.000000, X, Y) && !ellipse(20082.195000, 34172.141800, 827.952024, 827.952024, 0.000000, X, Y) && !ellipse(23404.207458, 33930.440155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20829.307200, 28711.140000, 1419.425217, 1419.425217, 0.000000, X, Y) && !ellipse(20088.123657, 32049.412964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21596.190000, 27699.006000, 725.858421, 725.858421, 0.000000, X, Y) && !ellipse(20038.696304, 30405.814423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28337.280000, 26839.440200, 1212.584035, 1212.584035, 0.000000, X, Y) && !ellipse(27052.007965, 28591.428467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23669.912600, 25363.961600, 2365.936068, 1452.752042, 7.630000, X, Y) && !ellipse(25028.782715, 26577.952484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20958.361282, 32290.088715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22638.591140, 34460.058000, 1648.424047, 476.463214, 154.936000, X, Y) && !ellipse(21694.192000, 34049.524000, 632.208818, 632.208818, 0.000000, X, Y) && !ellipse(22401.284400, 34360.352600, 2124.888061, 477.002414, 338.058000, X, Y) && !ellipse(23203.114000, 30629.916000, 785.057623, 785.057623, 0.000000, X, Y) && !ellipse(22384.434601, 26311.570740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21672.155289, 31009.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24390.643768, 28656.142151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23128.624000, 32494.402000, 1599.016046, 1599.016046, 0.000000, X, Y) && !ellipse(23043.869537, 26504.487823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.418701, 30479.133057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26748.872650, 27730.373260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22566.304108, 26826.102142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20160.531616, 28502.012390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.029816, 27967.507202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20504.446854, 33896.320374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20644.904541, 28068.061127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27527.855591, 33588.546722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28010.064000, 26919.770000, 2424.368070, 2424.368070, 0.000000, X, Y) && !ellipse(23074.904175, 27285.777985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26833.087524, 33134.807526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28034.376770, 32746.602417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21548.318085, 26664.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21729.718979, 28300.397430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21052.686508, 30128.764771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22823.799469, 28293.053619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22180.309311, 29757.684601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22817.634000, 31008.844000, 1570.112045, 1570.112045, 0.000000, X, Y) && !ellipse(20773.264587, 34306.044495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21649.595505, 29947.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21084.598633, 29651.406433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26368.972473, 28338.682953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20147.160000, 32584.810000, 1443.840042, 1443.840042, 0.000000, X, Y)
[Sun Jun 16 01:11:04 2013] Writing fullrun_mos2_xmm0555630101_pi300-10000_pass1_cl_src136.gif