[Sun Jun 16 00:55:33 2013] Detection parameters:
  Position = (218.9, 364.1) = 15 4 10.39 -42 0 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 384.7 +/- 28.4
  Background counts = 106.9
  Rate = 0.02 +/- 0.001

[Sun Jun 16 00:55:56 2013] Off-axis axis estimate = 7.48'
[Sun Jun 16 00:59:37 2013] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:59:37 2013] Initial guess for spatial extent in simple fitting = 10.17"
[Sun Jun 16 00:59:37 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.931
[Sun Jun 16 00:59:37 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 10.17"
[Sun Jun 16 00:59:39 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src22.ximg exists
[Sun Jun 16 00:59:39 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Jun 16 00:59:39 2013] Fit fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_src22 appears to have run properly
[Sun Jun 16 00:59:42 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Jun 16 00:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Jun 16 00:59:42 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Jun 16 00:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Jun 16 00:59:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 01:01:54 2013] Spatial fit model total counts = 2313.510000, observed total counts = 2115.000000
[Sun Jun 16 01:01:54 2013] Offset between fit and detection position for source 124 = 0.784593 pixels
[Sun Jun 16 01:01:54 2013] 2116.830000 total counts/ 1783.900000 bgd. counts: snr = 7.882567
Spatial fit parameters:
  Offset between fit and detection position for source 124 = 0.784593 pixels
  Position = (218.6, 363.4) = 15 4 10.48 -42 0 30.3
  Extent = 17.0" x 7.7", rotation angle = 88
  Source counts = 332.9 +/- 46.0
  Background counts = 1783.9
  Rate = 0.007 +/- 0.001
[Sun Jun 16 01:01:56 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 01:01:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 01:01:56 2013] Assessing source extent using major
[Sun Jun 16 01:01:56 2013] Source does appear to be extended
[Sun Jun 16 01:01:56 2013] Computing asymmetry using major and minor axis, asym = 2.21
[Sun Jun 16 01:01:56 2013] Source is asymmetric
[Sun Jun 16 01:01:56 2013] Source is confused with source 125
[Sun Jun 16 01:03:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:03:59 2013] Initial guess for spatial extent in simple fitting = 12.35"
[Sun Jun 16 01:03:59 2013] source mask rpix=2.8, npix_max = 44, mask sum = 38, frac = 0.852
[Sun Jun 16 01:03:59 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 12.35"
[Sun Jun 16 01:04:01 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src22.ximg exists
[Sun Jun 16 01:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src22.csv
[Sun Jun 16 01:04:01 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Jun 16 01:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src22.csv
[Sun Jun 16 01:04:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 01:04:04 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Jun 16 01:04:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Jun 16 01:04:04 2013] fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Jun 16 01:04:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Jun 16 01:04:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 01:06:08 2013] Warning, spatial fit 22 centroid is now closest to src. 125
[Sun Jun 16 01:06:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 01:06:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 01:06:09 2013] Assessing source extent using major
[Sun Jun 16 01:06:09 2013] Source does appear to be extended
[Sun Jun 16 01:06:09 2013] Computing asymmetry using major and minor axis, asym = 2.21
[Sun Jun 16 01:06:09 2013] Source is asymmetric
[Sun Jun 16 01:11:00 2013] XMMSAS src. selection expression = ellipse(18974.006352, 31566.473414, 1020.235233, 461.626411, 87.717817, X, Y)
[Sun Jun 16 01:11:00 2013] Not overwriting source region fullrun_mos2_xmm0555630101_pi300-10000_pass1_cl_src124_src.reg
[Sun Jun 16 01:11:00 2013] Extracting stamp from image fullrun_mos2_xmm0555630101_pi300-10000_cl_sm2.00.img.gz, (160, 305) - (277, 422)
[Sun Jun 16 01:11:00 2013] XMMSAS bgd. selection expression = annulus(18974.006352, 31566.473414, 1700.392054, 3400.784109, X, Y) && !ellipse(18522.512619, 33701.478394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19202.438000, 33281.016000, 1686.040049, 1686.040049, 0.000000, X, Y) && !ellipse(21139.564000, 31063.063800, 1492.296043, 1492.296043, 0.000000, X, Y) && !ellipse(23798.784910, 28364.353801, 1492.296043, 1074.139365, 69.448755, X, Y) && !ellipse(18676.722031, 34140.888397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22158.683200, 27665.682520, 931.416027, 931.416027, 0.000000, X, Y) && !ellipse(20082.195000, 34172.141800, 827.952024, 827.952024, 0.000000, X, Y) && !ellipse(20829.307200, 28711.140000, 1419.425217, 1419.425217, 0.000000, X, Y) && !ellipse(20088.123657, 32049.412964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19653.871048, 33534.734589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21596.190000, 27699.006000, 725.858421, 725.858421, 0.000000, X, Y) && !ellipse(20038.696304, 30405.814423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20958.361282, 32290.088715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22638.591140, 34460.058000, 1648.424047, 476.463214, 154.936000, X, Y) && !ellipse(21694.192000, 34049.524000, 632.208818, 632.208818, 0.000000, X, Y) && !ellipse(22401.284400, 34360.352600, 2124.888061, 477.002414, 338.058000, X, Y) && !ellipse(18302.633713, 35700.872101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17926.127991, 29065.943268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21672.155289, 31009.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23128.624000, 32494.402000, 1599.016046, 1599.016046, 0.000000, X, Y) && !ellipse(20571.783707, 35693.711487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18744.490326, 35110.244904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19887.092804, 35012.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20160.531616, 28502.012390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20504.446854, 33896.320374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20644.904541, 28068.061127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18777.967590, 32672.874908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21053.415314, 35111.843231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18749.881363, 31301.223053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19661.569305, 29312.308746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16148.688095, 30700.666046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21729.718979, 28300.397430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21052.686508, 30128.764771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19648.302124, 35448.559357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22823.799469, 28293.053619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22180.309311, 29757.684601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22817.634000, 31008.844000, 1570.112045, 1570.112045, 0.000000, X, Y) && !ellipse(20773.264587, 34306.044495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21649.595505, 29947.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21084.598633, 29651.406433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20147.160000, 32584.810000, 1443.840042, 1443.840042, 0.000000, X, Y)
[Sun Jun 16 01:11:00 2013] Writing fullrun_mos2_xmm0555630101_pi300-10000_pass1_cl_src124.gif