[Sun Jun 16 00:55:02 2013] Detection parameters:
  Position = (206.5, 334.8) = 15 4 15.25 -42 2 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 225.0 +/- 20.5
  Background counts = 42.0
  Rate = 0.009 +/- 0.0008

[Sun Jun 16 00:55:18 2013] Off-axis axis estimate = 7.17'
[Sun Jun 16 00:59:22 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:59:22 2013] Initial guess for spatial extent in simple fitting = 10.01"
[Sun Jun 16 00:59:22 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.955
[Sun Jun 16 00:59:22 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 10.01"
[Sun Jun 16 00:59:27 2013] fullrun_mos1_xmm0555630101_pi300-10000_cl_pass0_src70.ximg exists
[Sun Jun 16 00:59:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630101_pi300-10000_cl_pass0_src70.csv
[Sun Jun 16 00:59:28 2013] fullrun_mos1_xmm0555630101_pi300-10000_cl_pass0_src70_1.ximg exists
[Sun Jun 16 00:59:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630101_pi300-10000_cl_pass0_src70.csv
[Sun Jun 16 00:59:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630101_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630101_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:59:36 2013] fullrun_mos1_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sun Jun 16 00:59:37 2013] fullrun_mos1_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sun Jun 16 00:59:37 2013] Fit fullrun_mos1_xmm0555630101_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Sun Jun 16 01:01:18 2013] Spatial fit model total counts = 480.978000, observed total counts = 481.000000
[Sun Jun 16 01:01:18 2013] Offset between fit and detection position for source 130 = 0.027964 pixels
[Sun Jun 16 01:01:18 2013] 486.098000 total counts/ 297.239000 bgd. counts: snr = 10.954304
Spatial fit parameters:
  Offset between fit and detection position for source 130 = 0.027964 pixels
  Position = (206.5, 334.8) = 15 4 15.26 -42 2 34.7
  Extent = 6.1 (5.3-7.0)", rotation angle = 0
  Source counts = 188.9 +/- 22.0
  Background counts = 297.2
  Rate = 0.004 +/- 0.0005
[Sun Jun 16 01:01:19 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 01:01:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 01:01:19 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 01:01:19 2013] Source does appear to be extended
[Sun Jun 16 01:01:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:03:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:03:53 2013] Initial guess for spatial extent in simple fitting = 6.12"
[Sun Jun 16 01:03:53 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.825
[Sun Jun 16 01:03:53 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 6.12"
[Sun Jun 16 01:03:56 2013] fullrun_mos1_xmm0555630101_pi300-10000_cl_pass1_src68.ximg exists
[Sun Jun 16 01:03:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630101_pi300-10000_cl_pass1_src68.csv
[Sun Jun 16 01:03:56 2013] fullrun_mos1_xmm0555630101_pi300-10000_cl_pass1_src68_1.ximg exists
[Sun Jun 16 01:03:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630101_pi300-10000_cl_pass1_src68.csv
[Sun Jun 16 01:03:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630101_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630101_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 01:03:58 2013] fullrun_mos1_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Sun Jun 16 01:03:58 2013] fullrun_mos1_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Sun Jun 16 01:03:58 2013] Fit fullrun_mos1_xmm0555630101_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Sun Jun 16 01:05:32 2013] Spatial fit model total counts = 480.993000, observed total counts = 481.000000
[Sun Jun 16 01:05:32 2013] Offset between fit and detection position for source 130 = 0.000056 pixels
[Sun Jun 16 01:05:32 2013] 486.109000 total counts/ 297.172000 bgd. counts: snr = 10.960064
Spatial fit parameters:
  Offset between fit and detection position for source 130 = 0.000056 pixels
  Position = (206.5, 334.8) = 15 4 15.26 -42 2 34.7
  Extent = 6.1 (5.3-7.0)", rotation angle = 0
  Source counts = 188.9 +/- 22.0
  Background counts = 297.2
  Rate = 0.004 +/- 0.0005
[Sun Jun 16 01:05:33 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 01:05:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 01:05:33 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 01:05:33 2013] Source does appear to be extended
[Sun Jun 16 01:05:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:09:12 2013] XMMSAS src. selection expression = ellipse(17913.440200, 29075.680000, 367.465811, 367.465811, 0.000000, X, Y)
[Sun Jun 16 01:09:12 2013] Not overwriting source region fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_src.reg
[Sun Jun 16 01:09:12 2013] Extracting stamp from image fullrun_mos1_xmm0555630101_pi300-10000_cl_sm2.00.img.gz, (185, 314) - (228, 356)
[Sun Jun 16 01:09:12 2013] XMMSAS bgd. selection expression = annulus(17913.440200, 29075.680000, 612.443018, 1224.886035, X, Y) && !ellipse(18999.369156, 30923.324768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19209.421799, 30325.420135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19850.665802, 28413.363617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16166.220581, 30818.886536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19801.319427, 29135.040405, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 01:09:12 2013] Writing fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130.gif
[Sun Jun 16 01:09:37 2013] ../../xmm0555630101/products/events/fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_src.evt and ../../xmm0555630101/products/events/fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_bgd.evt exist, delete to re-create
[Sun Jun 16 01:09:37 2013] Mean detx,y = (4227.27, -7860.90) 
[Sun Jun 16 01:09:37 2013] ../../xmm0555630101/products/images/fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_src.img and ../../xmm0555630101/products/images/fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_bgd.img exist, delete to re-create
[Sun Jun 16 01:09:37 2013] ../../xmm0555630101/products/spectra/fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_src_b10.pi.gz and ../../xmm0555630101/products/spectra/fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_bgd.pi exist, delete to re-create
[Sun Jun 16 01:09:37 2013] Setting source spectrum file to fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_src_b10.pi.gz
[Sun Jun 16 01:09:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_bgd.pi.gz
[Sun Jun 16 01:09:37 2013] ../../xmm0555630101/products/lightcurves/fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_src.lc and ../../xmm0555630101/products/lightcurves/fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130_bgd.lc exist, delete to re-create
[Sun Jun 16 01:10:55 2013] fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130.rmf exists, delete to re-create
[Sun Jun 16 01:10:55 2013] fullrun_mos1_xmm0555630101_pi300-10000_pass1_cl_src130.arf exists, delete to re-create